Quantcast
Channel: EHSQL(Environment-Energy ,Health,Safety, Security and Social Ac. ,Quality-Lab) Technical services
Viewing all 8088 articles
Browse latest View live

Indian Agriculture -It gives the work about 52% of the entire manpower.

$
0
0
Indian Agriculture has an ancient  background which goes back to 10 thousand years. Agriculture is currently the biggest industry in India. It plays the key role in socioeconomic growth in India. In terms of  production India is in the second position in the world. It gives the work about 52% of the entire manpower.
              The Indian sub-continent has an area of 3.28 million sq. km (329 million hectares),out of which 60.89% of area under agriculture. Area  under irrigation is 25.96%. The country produces over 200 million tonnes of food grains, and it is self-sufficient in food grain production. Important commercial crops are sugarcane, cotton, jute,  tobacco and potato and major plantation crops are tea, coffee, cocoa, rubber, coconut, arecanut. The country also boasts a host of spices such as pepper, cardamom, ginger, chillies, coriander, garlic, cloves and nutmeg. Popular horticultural crops include tropical to temperate fruits, vegetables, flowers, cashewnut, a host of root and tuber crops and medicinal and aromatic plants. Fruits and vegetables including onion and potato contribute 20% of the total agricultural output of the country.
After crop production, animal husbandry is the most important economic activity in the rural areas. India ranks the highest number of livestock in the world and the count is 281 million. Second place in cattle numbers and the count was 175 million livestock.


Steps from Indian Government for Agriculture:         

The Government of India has the key roles of following factors,
  • Irrigation Management
  • Market Research and Information Network
  • Construction of Ware housing
  • Grading and Standardization
  • Development/Strengthening of Rural Agricultural Marketing Infrastructure
  The Indian Council of Agricultural Research (ICAR)  is the apex body in agriculture and related allied fields, including research and education.
The Indian Agricultural Research Institute (IARI) was set up in the year 1905. The institute had a key role in the studies and explorations that resulted in the Green Revolution in the decade of the 1970s.
The Indian Government  has also started  Farmers Commission to completely evaluate the agriculture program.
Crop Pattern in India:


































Problems Facing  Indian Agriculture:
Nearly 60% of the entire population employed in agriculture, still growth is much lesser compared other sectors. The reason is income and growth slower than other industries.
The low productivity due to
1.Inadequate finance and marketing services for farm produces.
2.Lack of knowledge in adopting new technologies.
3.Not use of intelligent water /irrigation management system.
4.Lack of  infrastructure and services in rural areas.

Needed  factors  to  improve this sector:

1.Enhancing agricultural productivity and  rural growth
2.Strengthening market knowledge and skills among farmers
3.Improving  water resource and irrigation management.
4.Guiding  non-farm entrepreneurship among farmers.
5.Give proper extension services about new technologies to farmers.

Japanese climate body waves red, says monsoon could be below normal

$
0
0

Japanese climate body waves red, says monsoon could be below normal


The South-West monsoon rains are expected to hit the Kerala coast anytime now. But, a forecast update from Japanese researchers appears to pour cold water on its prospects.
Tokyo-based Research Institute for Global Climate fears that abnormal warming of the East Indian Ocean would precipitate the ‘negative Indian Ocean Dipole.’ This results from an erratic warming pattern in the Indian Ocean wherein the East (off Indonesia) gets warmed up significantly higher than the West (off East Africa). It affects the supply of ocean moisture, an essential ingredient in the formation of monsoon clouds, headed towards India.

ERRATIC WARMING

A good part gets prematurely rained out in the ocean itself because warm waters fuel convection (evaporation and cloud-building).
“A negative Indian Ocean Dipole mode will develop soon and reach its peak in early autumn,” the Japanese agency said.
“Because of this, the Indian summer monsoon rainfall is expected to be below normal; a weak La Nina condition in the equatorial Pacific might reduce the negative impact to some extent.”

ADVERSE IMPACT

If this were to prove true, it could have an impact on the performance of the agricultural sector as well as on other sectors through the effect on rural incomes. Agriculture accounts for 17 to 20 per cent of the Gross Domestic Product and is largely rain-fed. So a fall in agriculture has a ripple effect on the economy.
The monsoon accounts for 80 per cent of rainfall. A delay by a few days in the onset of rain can be telling, since about half of the farm output comes from crops sown during the June-September rainy season.
It is also key to determining agricultural output, inflation, consumer spending and overall economic growth. Below normal rainfall could spell disaster making food more expensive, aggravating power and water shortage, and hitting industrial production. A normal monsoon can positively impact the stock markets as it would boost the general sentiment.
A good monsoon increases rural purchasing power. Most fast moving consumer goods companies depend on the rural market for growth in sales.

Profitable Fast Growing Trees - Gmelina arborea, Melia Dubia, Bamboo, Casuarina

$
0
0
Profitable Fast Growing Trees - Gmelina arborea, Melia Dubia, Bamboo, Casuarina

With thousands of tree species growing worldwide, only a small number are considered valuable to the commercial timber industry.
Fast Growing Timber Trees:
1. Gmelina arborea (Kumil, Kumula maram in Tamil):
Gmelina arborea is a fast growing tree. It is used in constructions, furniture, carriages, sports, musical instruments and artificial limbs. It can grow moderate to large height up to 30 m with girth of 1.2 to 4. It can be harvested in 8-10 years.


2. Melia dubia - (Malai Vembu in Tamil):
Melia Dubia is fast growing tree and it can be cultivated in all types of soil and requiring a low supply of water. Melia dubia has the unique feature of growing to 40 feet within 2 years from planting and can be mechanically pruned and harvested. It is used in plywood, match industries. Melia dubia (Malai Vembu)


Trees for Industries:
Pee Maram1) Match Industries:
1. Ailanthus excelsa - Indian Tree of Heaven (Perumaram, Pee maram, in Tamil):
Indian Tree of Heaven is a large deciduous tree, 18-25 m tall trunk straight. Mainly used in match box industry and also Boat building (general), Boxes and crates, Musical instruments, Plywood, Pulp/Paper products, Tool handles. Need less irrigation and suitable for all soil types.







2) Paper Industries:
1. Casuarina junghuhniana - (savukku in Tamil):
Casuarina is a fast growing and adoptable for any soil types. Mainly used in paper industries. It can be harvested after 3.5 years.










2. Bamboo (Bambusa nutans, B. Bamboos, B. tulda, B. vulgaris, B. Balcooa)
Bamboo is the world's fastest growing plant and some species of bamboo can grow up to a foot a day in the right conditions. It can be cultivated in all type of soils with sufficient water irrigation facility. Now bamboo can be cultivated in tissue culture sapling which will give 5 times more density. After the year 4, bamboo can be harvested 20-60 tons/acres for 60 years.
3) Bio mass Industries:
1. Melia dubia - (Malai Vembu in Tamil):
As an energy crop, Melia dubia has the potential of yielding in excess 40 tons of biomass on average per acre per annum over a 10 year period (before replanting is required). It’s high calorific value makes it a viable source of feedstock for biomass power plants.

2.  Bamboo (Bambusa nutans, B. Bamboos, B. tulda, B. vulgaris, B. Balcooa):
Its high yield makes it usable in biomass industries.
The following trees are not comes under fast growing category, but they are having strong timber values. Those trees will take minimum of 30 to 40 years to maturity.
1.Tectona grandis -  Teak.
2. Haldinia Cardifolia (Manja Kadambu in Tamil ).
3. Rose wood.
4. Pterocarpus santalinus -( Red Sanders, Sivappu Santhanam in Tamil).
5. Pterocarpus marsupium - (Indian Kino Tree,  Vengai in Tamil).
6. Santalum album -  (Sandal wood ,Santhana maram in Tamil).
7. Thespesia populnea - (Poovarasu in Tamil).
8. Hardwickia binnata - (Aachaa in Tamil).
Points to be considered for cultivation:
Tree cultivation combines of both science and care. Here with some points in tree plantation.
These are the things to keep in mind before going for tree cultivation.
1. Select trees according to your land type, irrigation facilities and maintenance (after care)
2. Do Soil Test and water analysis and select trees that suits your soil type and water quality.
3. Spacing of trees.
Trees are  prefer to grow in many ways .so our effort would be not only to cover more area for tree plantation but also to plant more trees in a given area.
There are two aspects of tree space: above and below the ground. The above ground space is more obvious for ex.  Tall trees should not be placed where high tension wires are running overhead. Underground space is also as important and medium sized trees should be planted at least at a distance of 4 meters from each other and bigger ones at 8 meters from each other and 5 meters away from buildings foundations.
4. Time of planting
The period of planting depends upon the species, region, availability of irrigation facilities, rainfall of the region, etc. Winter is the best time for planting deciduous trees as they are dormant at this period and hence less likely to suffer from damage. For evergreen and semi-deciduous trees, rainy season is the best time for planting. Trees may be planted during the following periods:
During spring: That is January and February. At this time all the factors (especially the temperature), required for tree growth are present. Thus, this is a good time for young saplings to be planted.
At the onset of Monsoons: For most species and most areas, planting is carried out during monsoons. It is advisable to start planting work immediately after a good shower and when the ground is well moistened to the depth of planting. Thereafter any delay should be treated as loss of growing season.
5. After care.
The saplings need to be watered regularly, protected from cattle and pests and insects, given manure. Pruning will make trees more increase vigor, health and increase the value of timber.
6. Select plant species.
7. Inter cropping or mixed cropping.
8. Have knowledge of different trees.
9. Carbon credit
Carbon finance facilitates the financial reward through carbon credits for the reduction of greenhouse gas emissions by emitters in developing countries. Activities of the World Bank Carbon Finance Unit (CFU) are part of the larger global effort to combat climate change, and are aligned with the World Bank and its Environment Department's mission to reduce poverty and improve living standards in the developing world.
So we will start our green planet from today ..,

Amla Tree - Nellikai, Phyllanthus Embilca (Emblica offcinalis)

$
0
0

Amla Tree - Nellikai, Phyllanthus Embilca (Emblica offcinalis)

Amla(Aonla)  is a indian gooseberry native to India. Amla has a high medicinal and Ayuervedic properties. The fruits have the great source of vitamin C. A small fruit of amla is equal to 2 oranges in terms of vitamin C content. It is used as a good liver tonic in Ayurveda medicines. Apart from medicines the fruit juice extract is used in shampoo preparations and oil, hair dyes.It is also a very important ingredient in the famous Chyavanaprash, and a constituent of Triphala (three fruits) powder. It helps the digestion, prevent the dysentery, cleanses the liver. The dried fruit powder used in a cosmetic sectors as a removing age spots. It also reduces the blood sugar level. So over all it has the highly medicinal values. Obviously the plant have a greater demand nowadays.

Amla Fruit

Cultivation methods:
                              
Soil and climate:
           Good fertile and loamy soil is suitable for cultivation. Sandy soils also recommended. Water logged conditions not suitable .There are some good hybrid varieties such as Banarasi, Chakaiya, Kanchan, Krishna, NA6. Black and red soils also suitable for cultivation. The tree can grown in dry regions also.




Land preparation:
            Early period of monsoon is good time of planting. During May to june is best time for land preparations. First the field should be well ploughed and levelled. With the distance of  7-10m distance of pit digged with the depth of 1 cubic meter. Pit was exposed to sunlight for 20 days, then filled with 15 kg of FYM(farm yard manure) .


Planting:
          The common method of propagation is shield budding. Through seeds also it can be raised. From good and old age plants the fruits collected and raised in nursery. But for commercial cultivation budding is the good method. Proper selection of mother plants is necessary for commercial planting. Superior plants need for selections. Bud should be taken from the branch with more female flowers. The healthy budded plants planting in the pits during the rainy seasons or early monsoon seasons. In dried areas the budded plants raised in the  nurseries for better results. Nearly 80 seedlings need per one acre.

After Care:
               Proper weeding is necessary in early stages. For first two years field should be clean. Correct plant protection measures have to be taken. Pruning is essential for good yield. Leaving 4-5 healthy well shaped wide branches and removing all other weak branches. If we want means we will go with intercrops like pulses. During early stages the crop needs frequent irrigations. After two years once in 15 days only needs irrigation. After 4 years once in 20 days enough to irrigate.

Traditional Amla Plant


Harvest and yield:  
                 The plant starts yielding after 4-5 years of planting. A mature plant gives (10yr old) around 60-70 kg fruit per year. Per kg contains 15-20 fruits. A well maintained tree gives yield up to around 70 years. Average fruit yield is 200kg per year in a good grafted fully mature tree. It costs around Rs 6 per kg. For major medicinal crops banks including NABARD arranging loans for cost of cultivation to farmers. So all farmers will use this oppurtunity and get better returns. Because present production level in India is too low compared to the population. Now we are producing only 2 lakhs tonnes/year only. By creating awareness among people about the health benefits of Amla, We can attain great demand. That time we needs daily 2 lakhs tonnes of fruits.

Boron affects the growth and ultrastructure of castor bean plants

$
0
0

Sci. agric. (Piracicaba, Braz.) vol.65 no.6 Piracicaba Nov./Dec. 2008

http://dx.doi.org/10.1590/S0103-90162008000600014 

SOILS AND PLANT NUTRITION

Boron affects the growth and ultrastructure of castor bean plants

Boro afeta o crescimento e a ultra-estrutura da mamoneira


Denis Herisson da SilvaI; Monica Lanzoni RossiII; Antonio Enedi BoarettoIII; Neusa de Lima NogueiraII; Takashi MuraokaIV*
IUSP/CENA - Programa de Pós-Graduação em Ciências - C.P. 96 - 13400-970 - Piracicaba, SP - Brasil
IIUSP/CENA - Laboratório de Histologia e Biologia Estrutural de Plantas - C.P. 96 - 13400-970 - Piracicaba, SP - Brasil
IIIUSP/CENA - Laboratório de Nutrição Mineral de Plantas - C.P. 96 - 13400-970 - Piracicaba, SP - Brasil
IVUSP/CENA - Laboratório de Fertilidade dos Solos - C.P. 96 - 13400-970 - Piracicaba, SP - Brasil




ABSTRACT
The cultivation of oleaginous plants like the castor bean guarantees employment for agricultural families and can contribute in energy and chemical sectors, especially in the northeastern semi-arid regions of Brazil. Boron (B) deficiency is a widespread nutritional disorder despite the fact that various anthropogenic sources with high B content may increase soil B to toxic levels for plants. The present study was designed to investigate the ultrastructural effects of boron deficiency and toxicity on castor bean plants which were grown under greenhouse condition using plastic containers with 10 L of nutrient solution. Boron treatments comprised: control (no B); 0.27 mg L-1, 5.40 mg L-1 B pots (one plant per pot), tested in a completely randomized design with three replicates. The dry matter of all plant parts and B concentration were determined. Cellular ultrastructure was evaluated by transmission and scanning electron microscopy on samples of leaves and petioles. Dry matter yield was affected by the B absence treatment but there was no difference for the 5.4 mg L-1 B (toxic conditions) treatment. A marginal leaf burn at edge and tips of oldest leaves and absence of starch granules in chloroplasts were noted for the B toxicity treatment. The deformation of the youngest leaves, the death of the apical meristem as well as the swelling of the middle lamella, absence of starch granules in chloroplasts and petiole vessels untidily were observed in the B absent treatment. It is concluded that the production and development of castor bean plants is affected by boron deficiency, but not for boron toxicity conditions.
Key words: electron microscopy, middle lamellae, micronutrient, xylem, starch

RESUMO
A mamoneira é uma oleaginosa com grande potencial para a geração de renda na agricultura familiar e para produção de matéria prima para a indústria química e setor energético brasileiro, especialmente em regiões do semi-árido nordestino. A deficiência de boro (B) ocorre de forma generalizada no Brasil e a aplicação excessiva deste micronutriente pode causar toxicidade. Este estudo avalia o desenvolvimento e os efeitos ultra-estruturais de deficiência e toxicidade de boro em mamoneira. O experimento foi realizado em condições de casa de vegetação, com vasos de 10 L de solução nutritiva. Foram utilizados três tratamentos: testemunha (sem B); 0,27 e 5,40 mg L-1 B, uma planta por vaso, em delineamento experimental inteiramente ao acaso com três repetições. A produção de matéria seca de cada parte da planta foi avaliada e o teor de boro determinado. Foram observados os efeitos morfológicos e as alterações na ultra-estrutura celular nas folhas e pecíolos, através da técnica de microscopia eletrônica de transmissão e varredura. A produção de matéria seca da mamoneira foi afetada em condições de deficiência de boro, mas não em condições de toxicidade (5,4 mg L-1 B). Neste último tratamento foram constatadas cloroses nos bordos de folhas velhas e ausência de grânulos de amido. Na omissão de boro, as plantas apresentaram deformação de folhas novas, morte do meristema apical, engrossamento da lamela média, ausência de grânulos de amido nos cloroplastos e desorganização dos vasos condutores do pecíolo. O desenvolvimento e a produção da mamoneira são afetados em condições de deficiência de boro mas não na condição de toxicidade.
Palavras-chave: microscopia eletrônica, lamela média, micronutriente, xilema, amido



INTRODUCTION
The castor bean plant (Ricinus communis L.) is an African euphorbiaceae (Joly, 2002), whose oil is the main product of the crop, supplying the medicinal, cosmetic and automotive industries. Nowadays, with increasing prices of the crude oil, the castor bean cultivation emerges as a promising activity for biodiesel production, providing income in resource poor areas of Brazil (Savy Filho, 2005).
Boron (B) deficiency occurs in a large frequency in agricultural areas,,inducing to an excessive application of this nutrient (Gupta, 1979; Blevins & Lukaszewsky, 1998; Shorrocks, 1997). Davies & Albrigo (1994), Mattos Júnior et al. (2001), and Havlin et al. (2005) have underlined the short interval that exists between the B deficiency and toxicity. The deficiency of micronutrients in Ricinus communis was described by Lange et al. (2005). However, the ultrastructure changes under B deficiency and the boron toxicity in castor bean plants are not yet known.
The determination of the B primary function is one of the current challenges related to the mineral nutrition of plants (Blevins & Lukaszewsky, 1998). The primary function of B in the cell wall structure could explain all effects related to boron deficiency (Brown & Hu, 1997).
The swelling of the cell walls under boron deficiency and its relationship with the borate-ester cross-linked rhamnogalacturonan II dimer (RG-II) was described by Ishii et al. (2001). The presence of RG-II in cell walls in families of Brassicaceae, Cucurbitaceae, Leguminosae, Apiaceae, Chenopodiaceae, Solanaceae, Asteraceae, Liliaceae, Araceae, Amaryllidaceae and Gramineae was described by Matoh et al. (1996). Thus, there is a strong evidence that suggests the existence of a RGII complex also in Ricinus communis, however, not yet been found in this species or another one from the euphorbiaceae family.
The objective of this study was to investigate ultrastructural changes under B deficiency and toxicity conditions in Ricinus communis L. as well as the effects on castor bean production.

MATERIAL AND METHODS
The experiment was carried out in a greenhouse in Piracicaba, São Paulo state, Brazil (22º42'30'' S, 47º38'01'' W, 554 m above sea level). Castor bean seeds (savana cv.), were sown in washed sand which received 1/5 diluted nutrient solution (Johnson et al., 1957) supplied daily, without boron. The greenhouse deionized water presented 50 mg L-1 of boron, determined previously by Inductively Coupled Plasma Mass Spectrometry (ICP MS). The composition of the nutrient solution was N: 224 mg L-1; P: 62 mg L-1; K: 235 mg L-1; Ca: 160 mg L-1; Mg: 24 mg L-1; S: 32 mg L-1; Cl: 1.77 mg L-1; Cu: 0.032 mg L-1; Fe: 1.12 mg L-1; Mn: 0.11 mg L-1; Mo: 0.05 mg L-1; Zn: 0.131 mg L-1.
The experiment was set up with three treatments (0; 0.27; 5.40 mg L-1 of boron) and three replicates,in a randomized experimental design. Castor beans plants (one plant per pot) were transplanted ten days after emergence to plastic pots with 10 L of nutrient solution with 1/5 of salt concentration. After a week, the solutions were replaced by 1/2, and in the following week they were replaced by complete solutions (conductivity of 1.6 mS). The solutions were replaced every three weeks.
Plants were collected 60 days after germination, and samples were visualized using a transmission and scanning electron microscope.
Transmission Electron Microscopy
Samples from the blades of new leaves that showed deficiency of boron (0 mg L-1 of B) and new leaves of the control treatment (0.27 mg L-1 of B) were collected to evaluate ultrastructural symptoms of the boron deficiency. The effects of toxicity were investigated on samples of old leaf blades presenting marginal chlorosis (5.4 mg L-1 of B) and of old leaf blades from the control treatment (0.27 mg L-1 of B).
Afterwards the leaf samples were fixed in 2% glutaraldehyde, 4% paraformaldehyde, 5 mM CaCl2, in a 0.2M pH 7.5 sodium caccodilate buffer (Karnovsky, 1965). After 2 h at 4ºC they were washed with buffer and post fixed for 1 h in similarly buffered 1% OsO4 solution. After washing with a 0.9% NaCl solution, these samples were contrasted in loco with 2.5% uranyl acetate at 4ºC (12h), dehydrated in an increasing acetone series (25%, 50%, 75%, 90% and 100%) and inserted in Spurr resin.
The ultra thin cuts (60-90 nm) were obtained through the use of a diamond blade in a Porter-Blum MT Ultracut, placing on 300 mesh copper nets, and submitted to double coloration (Reynolds, 1963), using uranyl acetate and lead citrate solutions. These ultra thin cuts were examined using the Transmission Electron Microscope Zeiss EM-109 operating at 50 kV.
Scanning Electron Microscopy
The petiole tissues of new leaves from boron absent (0 mg L-1 of B) and control treatments (0.27 mg L-1 of B) were used to evaluate the symptoms of boron deficiency. There was not difference between the petiole morphology of plants treated with the boron toxicity and the control, and therefore, these samples were not analyzed. These samples were processed using 2% glutaraldehyde, in a 0.2M caccodilate buffer. After 2 h at 4ºC, these samples were washed in 0.1M caccodilate buffer and dehydrated with sequences of acetone series (25%, 50%, 75%, 90% and 100%). They were then dried to critical point (Balzers CPD030), and covered with gold (MED010-Balzers). The coated specimens were examined in a scanning electron microscope operating at 20 kV.
Determination of total B content of specimens
Samples weighed exactly 0.2 g after being dried for 24 h at 105°C, and were put into ceramic crucibles and ashed for 2 h at 550°C. The total boron content was determined by the azomethine-H method (Malavolta et al., 1997).
Statistical Analysis
Statistical analyses were made using Sigmaplot 2000 v.6 and SAS version 8.02 (SAS Institute, Cary, NC). The Tukey test was used to compare the means of the treatments (p< 0.05).

RESULTS AND DISCUSSION
Boron contents in plant pots and dry matter production
The mean B content (in dry mass) in new leaves was 12 mg kg-1 for the B absent treatment and 28 mg kg-1 for the treatment of 0.27 mg L-1 B. The B content in old leaves was 40 mg kg-1 for the treatment of 0.27 mg L-1 B and 450 mg kg-1 for the treatment of 5.4 mg L-1 B. The B content (dry mass) in petioles of new leaves was 11 mg kg-1 for the absent treatment and 20 mg kg-1 for the treatment of 5.4 mg L-1 B.
The mean of dry matter weight per plant of the B deficiency treatment plants was smaller than for the treatments of 0.27 mg L-1 B and 5.4 mg L-1 B (Figure 1). The seed production of plants was strongly affected by B absence. However, there were no differences in seed production, as well as dry matter weight, between the 0.27 mg L-1 B and 5.4 mg L-1 B.



Boron deficiency and toxicity symptoms
The first symptoms of toxicity appeared for the treatment of 5.4 mg L-1 of B, on the 15th day after transplanting. The observed symptom included chlorosis on the edges of the leaves and spots. These toxicity symptoms were evident (5.4 mg L-1 of B), although there was no significant effect on growth, fruit and seed production. This fact indicates that B does not move readily from the old leaves to growing tissues (phloem mobility)
Boron generally moves through the xylem, governed by the transpiration flow, with a tendency to bind on cell wall pectin in leaves. For old leaves, the amount of transpiration along time is large, explaining the high B contents (Furlani, 2004). However, the high supply of B is not correlated with an increase of total B content in the cell walls (Matoh & Kobayashi, 2002). Besides, this micronutrient forms various biological compounds also in the cytoplasm, such as complexes of B (boric acid) with sugars, phenols, organic and polymeric acids (Dembitsky et al., 2002).
Boron deficiency symptoms appeared first in new leaves at the 40th day after transplanting, such as deformity and necrosis of leaf edges (Figure 2). Furthermore, minus-boron petioles showed hyperplasia and necrotic spots. This can be explained by an interference in the lignin synthesis under low B supply (Marschner, 1995). These deficiency symptoms indicate that the B phloem mobility in this species is probably low or restricted. In contrast, the mobility of B in several sorbitol, mannitol, and dulcitol rich species has been verified (Brown & Hu, 1996; Hu et al., 1997).
The reproductive growth, especially flowering and seed set and seed yield, were more sensitive to B deficiency than the vegetative growth. Stem and leaf biomass were also negatively affected by the absence of B (Figure 1). Necrosis of the apical meristem of shoot tips was followed by a loss of apical dominance and highly branched shoot architecture (Figure 2).
The boron deficiency interferes in IAA levels in apical tissues, phenols and quinones levels, followed by a loss of apical dominance (Coke & Whittington, 1968). This effect was detected in an experiment with micronutrient starvation in nutrient solution in castor bean by Lange et al. (2005). However, it is possible that most effects of boron deficiency on the physiologic processes are secondary effects (Marschner, 1995).
Ultrastructural evidences of boron deficiency and toxicity
The major symptom of boron deficiency was the thickening of the middle lamellae (Figure 3). This fairly and rigid layer is a structural component, located between two adjacent primary cell walls, composed of pectin. The thickening of the middle lamella could be explained by the structural role of boron in relation to the polysaccharide present in the pectin, especially the formation of dimeric B-Rhamnogalacturonan-2 (B-RG-II) in a borate-ester crosslinking (Kobayashi et al., 1996; Ishii & Matsunaga, 1996; O'Neill et al., 1996). This crosslink forms a macromolecular complex that controls the cellular growth (Fleischer et al., 1999) and mechanical properties of primary cell walls (Ishii et al., 2001). Probably, on the B-deficient medium, the B-RG-II formation was affected, with the increase of monomers, thickening the middle lamella and affecting the cellular growth (Figure 3).



Furthermore, besides playing a role in the function and stabilization of cell walls in plants (O'Neill et al., 1996), there is also considerable information that connects B with membrane structure and function (Pollard et al., 1977), as well as cellular homeostasis, suggesting that the B exerts some functions in the cytoplasm (Gassert et al., 2002).
A low level of starch granules was observed in chloroplast of plants under B absence (Figure 3). In B deficient plants, the carbohydrates synthesis is affected on account of the inhibition of the fosforilases action or the reduction in the uracyl synthesis, precursor of the glycose uridin diphosphate (Loué, 1993; Marschner, 1995).
The B toxicity symptoms appeared before those of B deficiency, but were less harmful to the whole plant growth. The absence of starch granules in chloroplasts in plants grown in the 5.4 mg L-1 B treatment occurred also in all specimens (Figure 4). However, the exact cause of this effect is not known, and the same alteration in the carbohydrate metabolism due to B toxicity was verified by Scott (1960) for sunflower plants.



The starch biosynthesis occurs inside the chloroplasts and amyloplasts where the enzymes that catalyze the polymerics synthesis are located, using as basic material the sucrose produced from photosynthesis (Galliard & Bowler, 1987). Thus, a reduction in the available sucrose for metabolic processes could lead a decrease on the starch production (Zrenner et al., 1995). Most of the B is present in the apoplast (Matoh, 1997), but it is possible that B can also be present in the cytoplasm under high B supply.
It is supposed that B excess could affect indirectly the formation of starch because of the properties of the boric acid to form complexes with a large number of sugars. Although B does not form complexes with sucrose (Marschner, 1995), this micronutrient can form complexes with other sugars, phenols, organic and polymeric acids (Dembitsky et al., 2002).
The petioles of new leaves grown under B deficient medium were thicker, irregular with necrotic spots. In a cross-sectional view, the petioles showed hyperplasia, and when observed by scanning electronic microscopy, the xylem vessels edges were more irregular (Figure 5). There was not difference between the petioles of plants grown in high B supply (5.40 mg L-1 B treatment) and control (0.27 mg L-1 of B treatment).



The irregular lignifications of the cell walls and a sensitive reduction in total lignin content as pointed out by Marschner (1995) and the effects of boron on growth and lignification in sunflower plants is due to peroxidase enzyme contents (Dutta & McIlrath, 1964). In addition, the role of boron in the lignin synthesis can be related to the formation of borate complexes with phenols, regulating the rate of free phenols that are precursors of the lignin synthesis (Lewis, 1980; Pilbeam & Kirkby, 1983; Shkolnik, 1984). Although the lignification process is associated with the secondary cell wall, it generally begins in the middle lamella and primary cell wall, sites where the boron deficiency seems to occur initially.

CONCLUSIONS
Dry matter and seed yield are negatively affected under boron deficient conditions. However, the high boron supply, twenty times more than a usual nutrient solution, was not able to decrease the development of Ricinus communis. The boron deficiency causes the swelling of middle lamellae and irregular growth of petiole vessels. Both deficiency and toxicity affects the starch synthesis in chloroplasts.

ACKNOWLEDGEMENTS
To CNPq and FAPESP for the financial support. To NAP-MEPA / ESALQ-USP for providing the access to a scanning and transmission electronic microscope. To Dr. M. Tchienkoua, Institute of Agronomic Research and Development, Yaounde, Cameroon, for the English revision of this paper.

REFERENCES
BLEVINS, D.G.; LUKASZEWSKI, K.M. Boron plant structure and function. Annual Review of Plant Physiology and Plant Molecular Biology, v.49, p.481-500, 1998.         [ Links ]
BROWN, P.H.; HU, H. Does boron play only a structural role in the growing tissues of higher plants? Plant Soil, v.196, p.211215, 1997.         [ Links ]
BROWN, P.H.; HU, H. Phloem mobility of boron in species dependent: evidence of boron mobility in sorbitol-rich species. Annals of Botany, v.77, p.497-505, 1996.         [ Links ]
COKE, L.; WHITTINGTON, W.J. The role of boron in plant growth. IV. Interrelationships between boron and indol-3yl-acetic acid in the metabolism of bean radicles. Journal of Experimental Botany, v.19, p.295-308, 1968.         [ Links ]
DAVIES, F.S.; ALBRIGO, L.G. Environmental constraints on growth, development and physiology of citrus. In: DAVIES, F.S.; ALBRIGO, L.G. Citrus. Wallingford: CAB International, 1994. p.52-82.         [ Links ]
DEMBITSKY, V.M.; SMOUM, R.; AL-QUNTAR, A.A.; ALI, H.A.; PERGMAMENT, I.; SREBNIK, M. Natural occurrence of boron-containing compounds in plants, algae and microorganisms. Plant Science, v.163, p.931-942, 2002.         [ Links ]
DUTTA, T.R.; McILRATH, J. Effects of boron on growth and lignification in sunflower tissue and organ cultures. Botanical Gazette, v.125, p.89-96, 1964.         [ Links ]
FLEISCHER, A.; O' NEILL, M.A.; EHWALD, R. The pore size of nongraminaceous plant cell walls is rapidly decreased by borate ester crosslinking of the pectic polysaccharide rhamnogalacturonan II. Plant Physiology, v.121, p.829838, 1999.         [ Links ]
FURLANI, A.M.C. Nutrição mineral. In: KERBAUY, G.B. Fisiologia vegetal. Rio de Janeiro: Guanabara Koogan, 2004. p.40-75.         [ Links ]
GALLIARD, T.; BOWLER, P. Morphology and composition of starch. In: GALLIARD, T. Starch properties and potential. Chichester: Wiley, 1987. p.55-78.         [ Links ]
GASSERT, B.; SPRICH, E.; PFEFFER, H.; DANNEL, F.; WIRÉN, N.; ROMHELD, V. Characterization of boron uptake in higher plants. In: Goldbach, H.E.; Rerkasem, B.; Wimmer, M.A.; Brown, P.H.; Thellier, M.; Bell, R.W. (Ed.) Boron in plant and animal nutrition. New York: Kluwer Academic, 2002. p.119-126.         [ Links ]
GUPTA, U.C. Boron nutrition of crops. Advances in Agronomy, v.31, p.273-307, 1979.         [ Links ]
HAVLIN, J.L.; BEATON, J.D.; TISDALE, S.L.; NELSON, W.L. Soil fertility and fertilizers: an introduction to nutrient management. 7 ed. Englewood Cliffs: Prentice Hall, 2005. 515p.         [ Links ]
HU, H.; PENN, S.G.; LEBRILLA, C.B.; BROWN, P.H. Isolation and characterization of soluble boron complexes in higher plants. Plant Physiology, v.113, p.649-655, 1997.         [ Links ]
ISHII, T.; MATSUNAGA, T. Isolation and characterization of a boron-rhamnogalacturonan. II. Complex from cell walls of sugar beet pulp. Carbohydrate Research, v.284, p.1-9, 1996.         [ Links ]
ISHII T.; MATSUNAGA, T.; HAYASHI, N. Formation of rhamnogalacturonanII: borate dimer in pectin determines cell wall thickness of pumpkin tissue. Plant Physiology, v.126, p.16981705, 2001.         [ Links ]
JOHNSON, C.M.; STOUT, P.R.; BROYER, T.C.; CARTON, A.B. Comparative chlorine requirements of different plant especies. Plant and Soil, v.8, p.337-353, 1957.         [ Links ]
JOLY, A.B. Botânica: introdução à taxonomia vegetal. 13 ed. São Paulo: Companhia Editora Nacional, 2002. 777p.         [ Links ]
KARNOVSKY, M.J. A formaldehyde glutaraldehyde fixative of high osmolarity for use in electron microscopy. Journal of Cell Biology, v.27, p.137-238, 1965.         [ Links ]
KOBAYASHI, M.; MATOH, T.; AZUMA, J. Two chains of rhamnogalacturonan II are cross-linked by borate-diol ester bonds in higher plant cell walls. Plant Physiology, v.110, p.10171020, 1996.         [ Links ]
LANGE, A.; MARTINES, A.M.; SILVA, M.A.C. Micronutrient deficiency effect on the nutritional status of the castor bean cultivar Iris. Pesquisa Agropecuária Brasileira, v.40, p.61-67, 2005.         [ Links ]
LEWIS, O.H. Boron, lignification and the origin of vascular plants: a unified hypothesis. New Phytologist, v.84, p.209-229, 1980.         [ Links ]
LOUÉ, A. Oligo-éléments en agriculture. Antibes: Nathan, 1993. 557p.         [ Links ]
MALAVOLTA, E.; VITTI, G.C.; OLIVEIRA, S.A. Metodologia para análise de elemento em material vegetal. In: MALAVOLTA, E.; VITTI, G.C.; OLIVEIRA, S.A. Avaliação do estado nutricional das plantas: princípios e aplicações. 2 ed. Piracicaba: Associação Brasileira para Pesquisa da Potassa e do Fosfato, 1997. p.231-307.         [ Links ]
MARSCHNER, H. Mineral nutrition of higher plants. London: Academic Press, 1995. 889p.         [ Links ]
MATOH, T. Boron in plant cell walls. In: DELL, B.; BROWN, P.H.; BELL, R.W. Boron in soil and plants: reviews. London: Academic Press, 1997. v.193, p.59-70.         [ Links ]
MATOH, T.; KAWAGUCHI, S.; KOBAYASHI, M. Ubiquity of a borate-rhamnogalacturonan. II. Complex in the cell walls of higher plants. Plant Cell Physiology, v.37, p.636-640, 1996.         [ Links ]
MATOH, T.; KOBAYASHI, M. Boron in plant cell walls. In: Goldbach, H.E.; Rerkasem, B.; Wimmer, M.A.; Brown, P.H.; Thellier, M.; Bell, R.W. (Ed.) Boron in plant and animal nutrition. New York: Academic Press, 2002. p.143-155.         [ Links ]
MATTOS JÚNIOR, D.; QUAGGIO, J.A.; CANTARELLA, H. Calagem e adubação dos citros. Informe Agropecuário, v.22, p.39-46, 2001.         [ Links ]
o'Neill, M.A.; Warrenfeltz, D.; Kates, K.; Pellerin, P.; Doco, T.; Darvill, A.G.; Albersheim, P. Rhamnogalacturonan. II. A pectic polysaccharide in the walls of growing plant cells, forms a dimer that is covalently cross-linked by a borate ester. Journal of Biological Chemistry, v.271, p.2292322930, 1996.         [ Links ]
PILBEAM, D.J.; KIRKBY, E.A. The physiological role of boron in plants. Journal of Plant Nutrition, v.6, p.563-582, 1983.         [ Links ]
Pollard, A.S.; Parr, A.J.; Loughman, B.C. Boron in relation to membrane function in higher plants. Journal of Experimental Botany, v.28, p.831-841, 1977.         [ Links ]
REYNOLDS, E.S. The use of lead citrate at high pH as an eletron-opaque stain in electron microscopy. Journal of Cell Biology, v.17, p.208-212, 1963.         [ Links ]
SAVY FILHO, A. Mamona: tecnologia agrícola. Campinas: EMOPI, 2005. 105p.         [ Links ]
SCOTT, E.G. Effect of supra-optimal boron levels on respiration and carbohydrate metabolism of Helianthus annuus. Plant Physiology, v.35, p.653-661, 1960.         [ Links ]
SHORROCKS, V.M. The occurrence and correction of boron deficiency. In: DELL, B.; BROWN, P.H.; BELL, R.W. Boron in soils and plants: reviews. Dordrecht: Kluwer Academic, 1997. p.121-148.         [ Links ]
SHKOLNIK, M. Y. Trace elements in plants. Amsterdam: Elsevier, 1984. 463p.         [ Links ]
ZRENNER, R.; SALANOUBAT, M.; WILLMITZER, L.; SONNEWALD, U. Evidence of the crucial role of sucrose synthase for sink strength using transgenic potato plants (Solanum tuberosum, L.). Plant Journal, v.7, p.97-107, 1995

Function of Micronutrients in Crops

$
0
0

Function of Micro nutrients in Crops

Micronutrients such as boron, iron, manganese, copper, zinc and molybdenum are no less important to plant growth than macronutrients such as nitrogen, phosphate and potassium. Most micronutrients play an important role in enzyme systems for metabolic processes of plants and symbiotic micro-organisms.

Symptoms and Remedies of Micronutrient Deficiencies in Crops

Since most micronutrients are relatively immobile in a plant, they are not easily transferred from older leaves to younger ones. Therefore, it is in younger leaves that the concentration of the nutrient becomes the lowest in the plant, and where the first symptoms of deficiency appear. There are many micronutrients needed, but plants are most likely to suffer from a deficiency of boron, iron, manganese, molybdenum, and zinc.

Boron Deficiency

One of the earliest symptoms is a mild chlorosis in mature leaves, which become brittle and tend to curl downwards. One of the symptoms in fruit trees is flower shedding. Fruits may become deformed and lumpy ( Fig. 1), and do not grow to their full size. The deficiency can be remedied by the application of 0.5-1 kg B/ha.

Iron Deficiency and Manganese Deficiency

Both of these may easily occur under such conditions as ion imbalance, calcareous soils, and poorly drained soils. The main symptom of iron deficiency is the chlorosis of young leaves. If the deficiency is severe, leaves will turn whitish yellow ( Fig. 2 and Fig. 3).
The main visual symptom of manganese deficiency is dark-green bands along the midrib and main veins, with a lighter-green area between bands in young leaves ( Fig. 4 and Fig. 5). Foliar application of 0.25% of Fe (or Mn) sulfate can effectively correct the deficiency.

Molybdenum Deficiency :

This may easily occur in acid soils ( Fig. 6). Concentrations of molybdenum in leaves and nodules show a good correlation with the shoot dry weight and nitrogen content in peanut, soybean, green gram, and black gram. Deficiencies can be remedied by the application of 2 mt/ha of slaked lime combined with 2 kg/ha of ammonium paramolybdate to the soil.

Zinc Deficiency :

Zinc may not be available to plants in calcareous soils. Deficiency tends to result in stunted growth and small leaves ( Fig. 7). Deficiency in fruit trees affects the growth of leaves, so that the ends of the shoot tips become rosette-shaped. Citrus trees often show chlorosis between the veins of the leaves, a symptom known as emottle-leaff. Heavy applications of phosphate fertilizer (200 mg P 2O 5 /kg soil) combined with 10 mg Zn/kg soil will restore yields.

Caution

Some symptoms of micronutrient deficiency are quite similar to those of virus infection. If a symptom is found simultaneously over a large area of the field, it may be due to a micronutrient deficiency. If a symptom starts in one place and spreads out from there, it is more likely to be a virus infection.

Index of Images

Figure 1 Boron Deficiency in Papaya
Figure 1 Boron Deficiency in Papaya
Figure 2 Iron Deficiency in Peanut
Figure 2 Iron Deficiency in Peanut
Figure 3 Iron Deficiency in Tomato
Figure 3 Iron Deficiency in Tomato
Figure 4 Manganese Deficiency in Tomato
Figure 4 Manganese Deficiency in Tomato
Figure 5 Manganese Deficiency in Soybean
Figure 5 Manganese Deficiency in Soybean
Figure 6 Molybdenum Defficiency in Peanut
Figure 6 Molybdenum Defficiency in Peanut
Figure 7 Zinc Deficiency in Corn
Figure 7 Zinc Deficiency in Corn

Choosing a Tree FOR PLANTATION

$
0
0
Choosing a Tree
The first step in tree selection is to determine the type of tree appropriate for your property and your needs.  Climate and soil play big roles.  A date palm might have a tough time surviving a Minneapolis winter, for example.  And a water-hungry willow would starve in the desert sands.  Make sure that the tree species you are considering can flourish in your local climate and soil conditions (designated hardiness zone).  And don’t forget some of these other important factors:
Matching tree to site is a key part of the tree selection process.  What is the size of the site on which your new tree or trees will be situated?  How big will that spindly three-foot sapling be in 30 or 40 years?  Is an oak or a willow, either very large when fully grown, the best tree for a small front lawn in a city?  On a large suburban lot, on the other hand, will a single small tree or bush be lost in a vast expanse of lawn?
A crucial factor to consider is proximity to buildings, sidewalks, driveways, streets, utility lines, overhead and buried, and septic systems.  Trees spread out both above and below ground and branch overhang and root growth can cause considerable damage and incur considerable expense if a tree is poorly situated. Consider the planting location with respect to foundation, concrete and asphalt structures,  and drainage structures.
Trees can play an important role in climate control. Deciduous trees planted on the south, west and east perimeters of a lot will provide shade during the summer while allowing scarce sunlight through in the winter when leaves have fallen. Evergreens, on the other hand, planted on the north and west sides of a property, can reduce winter heating costs by serving as windbreaks.
Drainage is yet another issue to consider. Young trees do best when planted in good-quality, well-drained loamy soil. Heavy clays in poorly-drained sites present particular problems as many species of trees including white firs, yellowwoods, beeches, red oaks and yews will not tolerate ‘wet feet.’ In all cases, stagnant water pooling around roots can lead to ‘root rot’ caused by lack of available oxygen. You can do a general test for soil drainage by digging a hole in the planting area and filling it with water. If the water hasn’t drained away in a couple of hours, drainage may be an issue. In areas where drainage is a particular problem, planting in raised beds of 12 to 18 inches of well-drained quality topsoil may be a solution.
Soil quality in new subdivisions often presents tree-planting problems. Construction materials, in addition to creating unsightly and difficult-to-work rubble, can alter the soils fertility by raising or lowering pH. Chemical and petroleum spills, which often occur during building construction, pose additional concerns. In cases where soil contamination is severe, the only solution may be to scrape away the contaminated soil and replace it with good quality topsoil at a depth associated with your planting objectives.
Personal taste is another key consideration. Think of how different kinds of new trees can enhance the attractiveness of your property. Make a list of the kinds of trees you admire and think about how they would look. Consider how your selection will fill in to the planting area over time. Make a few sketches or, if you don’t trust your own artistic talent, consult available landscape design software, or a landscape designer.

TREE PLANTING ON PRIVATE LANDS

$
0
0


TREE PLANTING ON PRIVATE LANDS

Dr. Narayan G. Hegde
BAIF Development Research Foundation
Pune 411 058
Need for Afforestation

With increasing population and growing consumerism, there has been severe pressure on food production and employment generation, particularly in agro-based development countries like India.  This has had a direct impact on deforestation, increase in soil erosion and run off of rain water, resulting in depletion of natural resources and environmental pollution.  Simultaneously, increasing use of fossil fuel for industrial production, power generation and automobiles has accelerated the emission of green house gases (GHGs) which are responsible for global warming and climate change.  The negative impacts of global warming are far more serious in India due to prolonged droughts, rising sea level and melting of snow caps of the Himalayas thereby affecting steady supply of water to major rivers of North India and our food security.  To reverse this trend, it is necessary to reduce the emission of GHGs, while taking up massive afforestation to serve as carbon dioxide sink and for supporting rural livelihood.

Trees have a significant role in keeping the environment clean, while supporting the livelihood. Over 43% of the cooking energy in the world is met from biomass.  In rural areas, where 65% of the population lives, biomass is the only accessible and affordable source of energy.  In the developing countries, the average per capita consumption of biomass in rural areas is equivalent to a ton of wood per annum and 50% of the wood cut in the world is used for fuel (Hall and de Groot, 1985).  More than 2 billion people in the Third World are dependent on biomass to meet their energy needs which is equivalent to 22 million barrels of oil every day.  In 1979, about 68.5% of the total rural energy was met from wood in India.  In 2000, the annual demand for wood in the Indian rural sector was 192.6 million tons while it was difficult to meet even 50% of it from the available sources.  This indicates the extent of damage caused to the natural forests. Most of the rural people have been dependent on  Government-owned forests  and  community  woodlots,  which  are  under  severe

Commissioned Paper. 2010. Western Ghats Ecology Expert Panel (WGEEP).  Constituted by the Ministry of Environment and Forests, Government of India, New Delhi. www.westernghatsindia.org

pressure and vanishing rapidly.  Thus, deforestation has been severely affecting the ecosystem and economy in India as well. 

Presently, only about 12% of the geographical area in the country is under close forests as against the stipulated forest cover of 33% required for maintaining an ecological balance (Anonymous 1989).  To solve the energy crisis, the strategy is to promote production, and ensure judicious use of wood energy which will indirectly conserve our forests.  This calls for improving the existing forests through people’s participation and increasing the area under forest cover even on non-forest lands, by bringing available barren and wastelands under afforestation.  It is estimated that India has about 80-100 million ha of denuded forests and wastelands, which are neither put to any productive use nor considered for conservation.  As such, these denuded lands have been accelerating soil erosion, wastage of rainwater and loss of bio-diversity, contributing to global warming. 

Social Forestry – A Drive for People’s Participation

With the background of developing private and non-forest public wastelands under afforestation while protecting the natural forests, the Government of India introduced several people-oriented afforestation schemes in the early 1950s.  However, the activity gained significance only during the Sixth Five Year Plan (1980-85) under social forestry, as a powerful tool to generate sustainable livelihood for rural people.  To support this programme, afforestation was introduced under various development schemes such as Rural Landless Employment Guarantee Scheme (RLEGS), National Rural Employment Programme (NREP), Employment Guarantee Scheme (EGS), Drought Prone Programme (DPAP), Western Ghats Development Scheme, etc.   In the 1980s, all the State Governments had set up a separate wing either in the Forest Department or in the Department of Social Forestry to operate social forestry schemes.  Various schemes such as development of community woodlots on public lands, establishment of decentralised kisan nurseries for free distribution of seedlings and promotion of tree plantations on marginal agricultural lands were launched with huge financial support.  The objective was to increase the supply of fuelwood, bamboo, small timbers and fodder, while generating rural employment and maintaining environmental stability.  The strategy was to grow fuelwood closer to the consumption points.   Among  various  afforestation  activities  under  social  forestry,
raising block plantations in the form of village woodlots on community lands, degraded forests and wastelands was the major programme.  Such plantations aimed at reducing the hardship of women and children, who travel long distances in search of fuelwood.  The remaining 30% of the programme included raising of seedlings for free distribution to farmers and schools.  The focus was on fodder and fuelwood production.

Based on the recommendations of the National Commission on Agriculture (1976), the Sixth Five Year Plan focussed on the production of fodder, fuel, small timber, minor forests produce and industrial raw materials under the social forestry programme.  The theme was “Development without destruction”.  The overall target of the Sixth Plan was to bring 1.65 million ha under tree cover.  In addition to afforestation on community wastelands, 37.25 million seedlings were distributed free for establishing farm forestry.  Simultaneously, production forestry was also given a boost to bring 0.62 million ha under industrial wood plantations.  Except for farm forestry, the other programmes could not make a significant impact because the objective of meeting the basic needs of fodder, fuel and timber of the local participants could not be fulfilled.

Looking at the drawbacks of the Sixth Plan, the Seventh Plan (1985-89) introduced a new programme with the theme “Forest for Survival” for expanding rural fuelwood plantations with the involvement of NGOs.  In 1985, the National Wastelands Development Board (NWDB) was established to increase tree and other green cover on wastelands with a target of 5 million ha coverage every year, while promoting fuel and fodder plantation to meet local needs.  NWDB intended to coordinate soil and water conservation, dryland farming, fodder development and conservation of land resources to prevent desertification as well.  To popularise afforestation, various innovative schemes were also launched and significant among them were decentralised plant nurseries for distributing among small farmers, cultivation of fodder, fuelwood and round timber species through Forest Development Corporations, fuelwood plantation on urban wastelands, production of industrial raw materials on Government-owned wastelands and leasing revenue wastelands to poor for growing trees, etc.  In 1988-89, after observing the performance for 4 years, the programme was restructured to cover activities such as reclamation of wastelands through agro-forestry, silvipasture and farm forestry, involving small farmers. 

Under NWDB, 7.18 million ha wastelands were brought under afforestation during the first 4 years of the Seventh Plan with a survival rate ranging from 43.6 to 70.4% (GoI, 1989).  Many NGOs, public sector undertakings and cooperatives such as NDDB and IFFCO initiated various innovative schemes to promote afforestation on degraded lands.  All these programmes heavily depended on People’s Participation for their success.  Apart from planting and maintenance, cooperation from local people was also expected for protection of plantations from stray animals and illicit felling, until harvesting for ensuring equal distribution among the participant families.  However, the outcome was not very encouraging.  Only 9% villages were covered under the programme.  Community wastelands were not easily available in many villages because either the Panchayats were not prepared to spare the lands or there were many encroachments. The outputs from fodder and fuel were very low as compared to the local needs.  Hence, the benefits were not significant (NCAER, 1988).  Poor rate of survival of saplings, poor growth, poor protection from livestock and trespassers were other factors which contributed to the failure.  In many States, the focus was shifted from fodder and fuelwood species to species such as eucalyptus because of local demand, fast growth and protection from stray animals.  With regard to employment generation, fodder and fuelwood plantations generated only 60-80 mandays/ha while farm forestry generated 600-800 days/ha.  The wage rate under these schemes being low compared to the local wage rate, there was no enthusiasm among the poor to take active part in the fuelwood production programme (Saxena, 1988; 1989; Sathe, 1990).

To enhance people’s participation in tree planting programme, the schemes were modified to integrate livestock with forage production and shift from fuelwood production to income generation by introducing short rotation species with long rotation trees and timber species with fuelwood. Emphasis was laid on extension programmes to motivate local families to take active part in afforestation (Shingi, 1988, Deshpande etal, 1990, Singh, 1990).  During 1980-88, the State Forest Departments across the country claimed that 20 billion seedlings were distributed for planting.  This meant an average of 35,000 plants per village but there were hardly any villages with such significant number of trees in the country.  This reflected the poor performance of social forestry schemes in the country.  This failure could have been avoided if suitable tree species had been selected.  Most of the farmers would have taken good care if species of their choice had been provided (Hegde, 1987).  Lack of marketing arrangements was another weakness of the social forestry programme. 

Interestingly, farm forestry scheme which was promoted by Forest Development Corporations and private paper and pulp mills by distributing seedlings of eucalyptus and other commercial species, had exceeded the target as the participants were motivated by the prospects of economic gains.  Fast growth, high value for the produce, sustained demand from industries and existence of an easily accessible market were the reasons for the popularity of eucalyptus plantation (NCAER, 1988).  Higher profitability due to higher rate of survival, short gestation period, higher yield, ready market, high value products like round wood, remunerative price, negligible impact on seasonal crops, easy management of labour, ease in protection and favourable Tax and Land Ceiling Acts were the other reasons for acceptance of eucalyptus by farmers (Gupta, 1990).  Farm forestry introduced on agricultural lands as a substitute for low yielding food crops with species such as eucalyptus was also successful (Muranjan, 1988). Farmers also preferred farm forestry as it demanded only 120-140 mandays of labour ha/year while bajra, gram and other rainfed crops demanded about 120-130 mandays/ha crop in 3-4 months (Singh, 1985). 

Choice of Tree Species for Private Lands

Based on various social forestry projects implemented over the last 2-3 decades, it is clear that choice of species is the key to the success of any afforestation programme.  When it comes to tree plantation on private lands, profitability is the main factor followed by other minor factors such as gestation period, demand for produce, level of investment, access to market, availability of planting material and specific local uses, which influence the farmers to select tree species for planting on their lands. 

Selection of suitable species is the most important motivating factor for people’s participation as it influences the profitability.  Tree planting on private lands is being carried out by the land owners either because they are convinced or motivated by some of the agencies engaged in promoting afforestation.  There are very few farmers who take initiative in establishing plantations of new species, based on the information they have gathered about the utility and profitability of these species.  However, most of the small farmers are driven by the publicity and attractive benefits as highlighted by the promoters, while selecting tree species for planting on their lands.  The popularity of the species also varied from region to region, based on the demand for produce, marketing infrastructure, agro-climatic conditions, available inputs and the extent of awareness and publicity created by the programme implementing agencies. 

Tree Species for Income Generation: In a study conducted in Pune and Nashik districts of Maharashtra, where multiple agencies were independently promoting tree planting, a majority of the farmers preferred growing fruit trees on their marginal and wastelands.  This was followed by timber and round wood species.  Among 35 most popular tree species promoted in the state, 18 species were grown for food, 8 for timber, 3 for fuelwood, 2 each for oil and ornamental purpose and 1 each for fodder and fibre. The most preferred among them were eucalyptus (Eucalyptus hybrid), mango (Mangifera indica), teak (Tectona grandis), custard apple (Annona squamosa) and jujubee (Zizyphus mauritiana).  The list of these species with their popularity rank is presented in Table 1 (Hegde, 1991).  This preference is based on the profitability as well as market demand for the produce and field publicity.  However, eucalyptus was the most popular species because of reasons other than high returns. First of all, eucalyptus had good demand as round wood in the local market.  Any wood that was not sold as pole was purchased by paper and pulp mills at the site.  In addition to assured demand, easy marketability and an attractive price, eucalyptus is a fast growing, non-browsing, coppicing species with a short harvesting cycle and well adapted to adverse agro-climatic conditions.  Being one of the few species promoted by the wood-based industries, it has received wide publicity.  Other tree species cultivated in India on a commercial scale under farm forestry by farmers are casuarina in coastal areas and poplar (Populus deltoides) which is confined to Northern India, beyond latitude 28o N. 

In interior areas, where marketing facilities for wood were inadequate, farmers preferred to grow fruit crops and used existing market outlets for selling their produce.  Thus, about 50% of tree selected were fruit species. Among fruit trees, seedlings of custard apple, jujubee (ber), tamarind,  jambolina, drumstick, jackfruit, cashew, Indian gooseberry,  wood apple and bullock's heart (Annona raticulata) were raised by farmers in decentralised rural nurseries while other  species such as mango, guava, pomegranate, coconut, mandarin, orange and sapota were raised in  commercial  nurseries  promoted  by  the Horticulture Department.  Most of the farmers did not mention any other species although there were many with high income potential because there was neither any publicity nor availability of the planting materials locally. 

The farmers were also confident of selling timber of eight species, namely eucalyptus, teak, chinaberry (melia), leucaena (subabul), portia (bhindi), casuarina, bamboo and shishum in local markets.  Three fuelwood species preferred by the farmers were Ramkathi acacia(Acacia  nilotica  var. cupressiformis), Gum acacia(Acacia nilotica var. telia) and Australian  acacia(Acacia auriculiformis).  The former two species are native to Maharashtra and used as fuel and timber, while the latter has been introduced only recently.  Five other species selected by the respondents were gulmohar(Delonix regia), Ashoka(Polyalthia pendula), neem(Azadirachta indica), sandalwood(Santalum album) and agave(Agave sisalana).  Of these, the former two were planted as ornamental, the other two for oil and agave shrub for fibre.  Sesbania (Sesbania sesban) is the only fodder species, although other multipurpose species like subabul, andShishumcould yield fodder to some extent.  Neem is an excellent species as a source of oilseed and biopesticide and drought tolerant.  However, farmers did not prefer neem as there was no attractive market for selling the seeds and they also lacked awareness about its yield and profitability.

Table 1. Choice of Tree Species by Land holders of Different Categories

S. No.
Name of the Species
Common Name
*Use
Total Responses
1.
Eucalyptus spp.
Eucalyptus
T
143                                                            
2.
Mangifera indica
Mango
F                                                  
129
3
Tectona grandis
Teak                                                             
T
109
4.
Annona squamosa
Custard apple
F
102                                                            
5.
Zizyphus mauritiana
Jujubee
F
71                                                            
6.
Melia azedarach
Chinaberry
T
52                                                            
7.
Tamarindus indica
Tamarind
F
41                                                            
8.
Psidium guajava
Guava
F
41          
9.
Leucaena leucocephala
Leucaena, Subabul
T,Fo
39                                                            
10.
Punica granatum
Pomegranate
F
28                                                            
11.
Syzygium cumini
Jambolina
F
22                                                             
12.
Moringa oleifera
Drumstick
F
19                                                            
13.
Thespesia populnea
Portia
T
18                                                            
14.
Azadirachta indica
Neem
Oi
15                                                            
15.
Artocarpus heterophyllus
Jackfruit
F
13                                                            
16.
Acacia nilotica var.telia
Gum acacia
Fu
11                                                             
17.
Cocos nucifera
Coconut
F
11                                                            
18.
Manilkara zapota
Sapota
F
11                                                            
19.
Citrus medica
Sweet lime
F
9                                                             
20.
Casuarina equisetifolia
Casuarina
T
6                                                            
21.
Anacardium occidentale
Cashew
F
5                                                             
22.
Dendrocalamus strictus
Bamboo
T
5          
23.
Acacia auriculiformis
Australian acacia
Fu
3                                                            
24.
Citrus reticulata
Mandarin
F
3                                                             
25.
Agave sisalana
Agave
Fi
3                                                            
26.
Polyalthia pendula
Ashok
O
2                                                            
27.
Delonix regia
Gulmohar
O
2                                                             
28.
Citrus sinensis
Sweet orange
F
2                                                            
29.
Acacia nilotica var. cupressiformis
Ramakathi acacia
Fu
2                                                            
30.
Sesbania sesban
Sesbania
Fo
2          
31.
Emblica officinalis
Indian gooseberry
F
3                                                            
32.
Annona reticulate
Ramphal
F                                                                     
1
33.
Dalbergia sissoo
Shishum
T                                                                     
1
34.
Santalum   album
Sandalwood
Oi
1          
35
Feronia limonia
Wood apple
F
1
No. of Respondents
 296                  
*   T -Timber, F-Food, Fo-Fodder, Fu-Fuel, Fi-Fibre, Oi-Oil, O-Ornamental

The small holders had shown preference for fruit species, while the medium and large holders preferred timber species. Inspite of its popularity among farmers, it was surprising to observe that eucalyptus was not the most profitable species promoted under social forestry in India.  This indicated that with wider publicity and market linkages and in the absence of knowledge on better alternatives, farmers are often influenced in making wrong judgments (Hegde, 1991).

Profitability of Tree Species: The benefit-cost analysis of 14 important fruit and timber species based on the data collected from farmers is presented in Table 2. While pole timber such as melia, eucalyptus, leucaena, bamboo and portia start generating  income from the third year, sesbania starts generatingincome through fodder during the first year itself and completes its economic life in 2-3 years.  Melia, leucaena and eucalyptus coppice well and thus, the plantations can be maintained to harvest 3-4 crops.  Portia trees are pollarded at an interval of three years and maintained for 20-25 years.  Harvesting of bamboo starts in the third year and continues every year for about 20-25 years.  While leucaena and eucalyptus have good demand as pulpwood, melia and portia are used as poles for housing and agricultural implements with limited demand. 

Drumstick starts fruiting from the second year and continues to provide income for 10-15 years.  Fruit trees like jujubee, custard apple, mango and cashew start fruiting from third year while tamarind starts producing fruits after 7-8 years.  Neem starts fruiting after 7-8 years and continues for 75-100 years, yielding 50-100 kg seeds every year.  As these species have different gestation period and various uses, it is extremely difficult for common farmers to take a quick decision about planting them.However, as all these species except neem, mango, cashew and tamarind, can be planted on field bunds without affecting arable crops, farmers do not mind planting these species if some support is given in the form of free seedlings and inputs.  If they have to establish a sole plantation on good lands using their own resources, then they will certainly explore more about investment and profitability before taking a final decision. 

Among the above species, portia was the most profitable (Rs.52,000), followed by teak,  drumstick, leucaena, melia, sesbania, eucalyptus, bamboo, custard apple, mango and neem.  It is interesting to observe that except in certain districts of Maharashtra, by and large, farmers are not aware about the management of portia to induce poles and the use of poles as light wood for agricultural implements.

All the 14 tree species listed in Table 2 were most popular because of easy marketability of the produce and higher return. The popularity among these species varied from district to district based on local use, availability of planting material and extension efforts. There are many other species which can produce timber (White siris, siris, shishum, White teak), fruits (citrus, guava, sapota, coconut, jackfruit, jamun, kokum, oil seeds (pongamia and mahua) and other non-wood produce (Indian gooseberry, myrobalan, and soap nut) which can be promoted for cultivation, if cost-benefit analysis is carried out and silvicultural practices are standardised.  Even neem
Table 2:  Analysis of Income (in Rs.) from different Species

                                                                                                                   Name of the Species
Common
Name
Duration
No. of trees/
Ha
Net/Tree/Year
Net/ha/year
Sesbania sesban
Sesbania
2
5000
4.80
24000
Melia azedarach
Chinaberry
9.
974
24350
2500
Leucaena leucocephala
Subabul
9
2500
13.88
34575
Eucalyptus Hybrid
Eucalyptus
9
2500
9.24
23100
Dendrocalamus strictus
Bamboo
10
625
23.33
14581
Thespesia populnea
Portia
10
625
83.93
52456
Tectona grandis
Teak
20
625
80.00
50000
Azadirachta indica
Neem
75
200
50.00
10000 *
Moringa oleifera
Drumstick
10
400
124.00
49600 *
Annona squamosa
Custard apple
10
400
29.69
11876 *
Zizyphus mauritiana
Jujubee
10
400
48.52
19568 *
Mangifera indica
Mango
50
100
100.00
10000 *
Anacardium occidentale
Cashew
50
156
125.00
19500 *
Tamarindus indica
Tamarind
50
45
463.00
20835 *
*   Income from wood not included                 ** According to prices of 1989-90

can be profitable, if plants of elite genotypes, multiplied vegetatively are used for planting and the seeds are processed for bio-pesticide production.  Likewise, many non-wood product species having different uses such as edible products, oil, gum, resin, wax, pesticides, tan, dyes, fibre, soap and medicines can be profitable, if plants produced through vegetative propagation are used for establishment and the produce is processed for value addition.

As compared to the economics of fruit and timber species, production of fuelwood is least attractive because the net annual income per ha is only about Rs.347/-.  Thus, it is not attractive for farmers to grow fuelwood species inspite of intensive programme promotion and heavy incentives.  If a ton of wood is sold for fuel, it would fetch only Rs.1000/-.  The same wood when sold as pulpwood would fetch 50% more and as round timber, 200% more.  When the wood is used as timber either for construction or furniture, it would fetch 400-500% higher price.  In such a situation, naturally farmers would prefer species with higher returns.  Under Social Forestry Programme, the poor farmers were persuaded to plant fuelwood and fodder, while large farmers had the option to grow wood for round timber, paper and pulp.  Thus, unknowingly, there was discrimination and the poor were left out of an excellent opportunity to earn more from the programme.  This was the major reason for lack of people’s participation and failure of many projects, which were intended for the benefit of the poor. 

Preference for different Tree Species: While calculating the profitability of different tree species, it is necessary to take their entire life cycle and convert into annual returns.  For instance, teak and many timber trees mature after 60-100 years, while the round timber species are ready for harvest at the age of 15 to 30 years.  Pulpwood will be ready in 4-6 years and fuelwood can be harvested in 2-5 years.  In case of fruit trees, tamarind has a productive life of over 80 years, while mango and cashew have a productive life of 40-50 years.  However, fruit trees start generating income from an early age and contribute to profit every year.  In case of timber species, income is generated after a long gestation and only when trees are cut.  Thus, fruit and non-wood tree species deserve to be promoted on a wider scale.  

Even for expansion of various fruit crops, there are limitations of labour, resources and market beyond certain scales of operation.  For instance, the area under fruit crops such as ber and amla could be expanded well during the last two decades.  However, with larger volume of these fruits arriving in the market, which is more than the existing demand, the prices have started falling down.  Unless efforts are made to process these fruits for value addition and preservation, farmers are not likely to cultivate these species on a large scale in the future.  For crops like mango, in the absence of cold storage and processing, glut during a particular period in the year may affect the price realisation.  Similarly, for crops like grapes which are highly labour intensive, farmers may not expand the area due to shortage and inefficiency of labour.  In such a situation, farmers are likely to select the next best crops for cultivation.  Looking to the present status of tree planting on private lands, it can be concluded that private land owners opt for different types of tree species in the following order of priority:

Preference for tree species in the order of priority:
 
1.      Fruits and nuts
2.      Round wood species and plywood
3.      Non-timber forest products and oil seeds
4.      Paper and pulpwood
5.      Forage and fuelwood
The above preference is based on current profitability and subject to availability of good soil, assured soil moisture and easy availability of inputs. The priority may change for different sites, based on adaptability of the species to local agro-climatic conditions, infrastructure for backward and forward integration, investment capabilities, etc.  In areas prone to natural calamities, it is better to select hardier species even if the returns are low instead of growing sensitive crops capable of higher returns.  There are many useful and valuable species like sandalwood, teak and red shishum, which are highly priced but the gestation period is very long.  Farmers may plant these species on a small scale but not for income generation in the short run.  The species covered in this paper are suitable for tropical regions and there are different species suited for sub-tropical and temperate regions.

To ensure selection of suitable species, it is better to prepare a land use plan, based on the soil productivity of the site earmarked for tree planting.  Fertile soil with assured soil moisture is highly productive, where fruit trees grow well and give high returns.  Hence, such lands can be reserved for establishing fruit orchards, if farmers are not intending to grow arable crops of high value.  Medium quality soils with moisture stress, not suitable for fruit crops can be used for growing round wood, soft wood or ply wood.  Soils of slightly inferior quality can be used for pulp and paper wood.  Soils of low fertility with moisture stress, not suitable for above types of species can be used for establishing fuelwood plantation.  There are shallow soils with moisture stress, where it is extremely difficult for tree species to survive. Such soils can be used for growing fodder shrubs and grasses.  Thus, soil productivity and profitability of different tree species should be taken into consideration, while making final selection of tree species for growing on private lands. 

Strategy for Solving Fuelwood Crisis

From various studies, it is clear that establishment of tree plantations for fuelwood and fodder is neither economically viable nor attractive to farmers for cultivation, particularly when they have other options. Further, there is no scope for selling fuelwood at a higher price, firstly, because most of the poor who are dependent on fuelwood for cooking, try to fetch it from public properties, free of cost.  Secondly, they do not have the purchasing power to buy at higher prices.  Therefore, in the absence of easy supply of fuelwood at an affordable price, pressure on community lands and forests will further increase, resulting in further denudation of the natural resources.  To reduce this problem, the following alternatives need to be considered.

Promotion of Commercial Plantation: In a forestry plantation for industrial raw materials and round timber, only about 40-50% wood is used for timber or industrial raw material and the rest is used as fuelwood.  If the community forestry programme can promote commercial plantations to meet the annual demand of 65-70 m3 of wood, these plantations can also meet 25% of the demand for fuelwood.  As the returns from commercial wood are very attractive, tree growers can afford to sell the leftover fuelwood as by-product at a lower price.  Thus, the poor can be benefitted.  Local grasses which grow in abundance in a well managed plantation, can be cut and carried to feed the stall-fed livestock.

Mixed Plantations:  Introduction of fuelwood species in a mixed stand with fruit, timber and commercial tree species is feasible.  Species like teak, mango, cashew, neem, etc. need wider spacing but the interspace remains idle for about 8-10 years, till trees attain normal size.  It is possible to establish fuelwood species of short gestation between these trees and harvest them in 3-5 years.  Selection of nitrogen-fixing tree species which are known for high calorific value, can further benefit farmers by nursing the main tree species through soil enrichment.  This strategy can further boost the fuelwood production. Fodder cum fuelwood species like leucaenea, gliricidia, sesbania, acacia and albizia are ideal for establishing a mixed stand.  Non-browsing tree species such as Australian acacia, kassod and casuarina are also useful as fuelwood species for planting on bunds and borders in fruit orchards.

Simultaneously, wood saving devices and alternate energy sources such as biogas plants, improved wood stoves, processing of biomass to improve the burning efficiency and solar cookers should be promoted. 

Trees under Agroforestry System

With depletion of agricultural lands and lack of irrigation facilities, agriculture in arid and semiarid regions is becoming uneconomical.  Agroforestry provides a viable solution for such problems. Under this system, woody perennials are introduced in the agricultural field without hampering arable crop production.  Trees serve as wind breaks, source of organic matter, shade and soil binder to prevent soil erosion while generating additional income.  Depending on the fertility and depth of soil and moisture availability, different tree species can be introduced.  In areas receiving more than 800 mm annual rainfall, it is possible to introduce various fruit crops while planting multipurpose tree species on field bunds and borders.  The interspace can be used for cultivation of food crops for 8-10 years, till the trees spread widely in the field.

Establishing shelterbelts by planting tall growing trees on field bunds is very popular in India.  Popular species used under shelterbelt planting are eucalyptus, poplars, casuarina, bamboo, acacia, dalbergia, leucaena, Silver oak, sesbania, gliricidia, melia, etc.To avoidadverse effects of these trees on agricultural crops, regular pruning of side branches and lateral roots will be helpful.  These trees will be ready for harvest as poles, while contributing foliage and twigs for fodder, fuel and green manure.  Shelterbelt plantations are profitable where farmers have fertile lands with irrigation facilities, with 200-300% cropping intensity like in Punjab, Haryana and Terai regions of Northern India.

Many farmers, particularly large land holders and absentee landlords, have been cultivating eucalyptus as a monocrop in non-irrigated areas, where very little care is needed after establishment.  In a few districts of Andhra Pradesh, leucaena is cultivated as a sole crop and harvested at an interval of 3-5 years for pulp wood. This system is becoming popular as the local paper mills are offering a remunerative price, apart from arranging to harvest and transport wood from the field. Such buy back support is needed to expand tree plantations on a large scale.

The Wadi programme promoted by BAIF Development Research Foundation is another good model for promoting trees on degraded private lands particularly in hilly terrains.  Under this programme, 0.4 ha land owned by each family is being developed under agri-horti-forestry system.  The agricultural crops grown as intercrops between the fruit trees start generating income from the first year itself, while fruit trees start bearing fruits after 4-6 years.  Large numbers of less known species of fruits, nuts and multipurpose plants are planted on the boundary and bunds to meet various household needs, while protecting the orchard.  These orchards provide gainful employment all round the year, while improving the ecosystem of the location and income of the land owners.
Bio-diesel Plantation is a wave to promote non-edible oil tree plantations in the country. Major oil seed trees in the country are neem, mahua (Madhuca indica and Madhuca longifolia), pongamia (Derris indica), undi (Calophyllum inophyllum)and jatropha (Jatropha curcus). Among these, jatropha and pongamia have received wider publicity. The Government of India has launched a massive extension programme to promote jatropha cultivation, by projecting very high returns and providing partial financial support for establishing the plantation.  The programme with good publicity, was launched to cover a larger area.  However, the programme faded away as the farmers realised that they were not receiving the anticipated returns.  This is an excellent example of how the programme can receive a severe setback if the anticipated benefits are not accrued.  Pongamia cultivation is also not well accepted by farmers due to lack of precise information about the yield and incomes, although it has several other benefits such as tolerance to drought, ability to prevent soil erosion, source of woody biomass, green manure, bio-pesticides and better micro-climate.  Species such as mahua, neem and pongamia are excellent for planting on community lands, village forest lands and along roads. 

Trees with Religious Sentiments: Trees have religious and sentimental values.  In ancient Hindu scriptures, uses of many trees for different purposes and their placement in home gardens have been very well described.  Establishment of tree groves around the community temples with a wide range of tree species is also a traditional custom.  These groves known as sacred groves, with a wide range of naturally grown and introduced trees and shrubs, are protected with respect by the community.  Many species of ficus and acacia are also considered holy trees and people generally do not cut them.  However, they do not want to plant a large number of such species unless they find some tangible benefits. 

Trees for Beautification: Economics and tangible benefits are the primary considerations for selecting tree species by farmers. Trees are also planted for beautification, to improve the micro-climate, arrest soil erosion and many other functions.  Trees provide an excellent ambience to the site, either residential or work areas.  Trees absorb carbon dioxide, thereby reducing the harmful effects of air pollution.  Thus, trees act as lungs of our cities to purify air and keep the surroundings cool, healthy and beautiful.  Selection of suitable tree species will enhance the aesthetic value and beauty of the surroundings.  The selection of species for various locations depends on the size, height and root system.  A strong and deep root system ensures better establishment and prevents uprooting by wind.

Tall growing trees with wide branches to provide shade, such as mahogany, rain tree, ficus and rubber tree can be planted to bring the open area under tree groves.  For the outer border of the campus, tall growing tree species may be planted. Along the internal roads on the campus, trees of small size, preferably with colourful and fragrant flowers may be planted.  There are smaller flowering herbs which do not cause any damage to the buildings when planted close to the buildings.  Plants like bamboo, bottle brush and weeping willow can be planted along lakes and canals.  Apart from plants of small and large size trees, a wide range of creepers with colourful and fragrant flowers can also be introduced.  Thorny hedges may be avoided, except for fencing as they require regular pruning.

Different tree species which can be selected for planting in Tropical gardens are presented in Annexure I.

Conclusion

While promoting tree planting on private lands, the preference of farmers should be considered.  Tree species to be selected should be based on the quality of land, availability of moisture, suitability of climate, growth rate, gestation period, profitability and for fulfilling other specific objectives. While most of the farmers consider profitability as the primary consideration, beautification, conservation and improving micro-climatic are the other considerations. For the success of any afforestation programme on private lands, income being the primary consideration, arrangements should be made for backward and forward linkages.  The extension programme to promote afforestation, should be based on well tested technical and economic data to guide the farmers and general public in the right direction.

References

Anonymous. 1989.  Indigenous greens become active again.  Hindu, Madras. September 10.

Deshpande, R.S.V. Ratna Reddy and P. Borse. 1990.  Resurrection of Institutionalism: A trade off between social and farm forestry.  Gokhale Institute of Politics and Economics, Pune (Unpublished) 17 pp.

GOI. 1989 B.  Developing India’s Wastelands.  Ministry of Environment and Forests, New Delhi:  82 pp.

Gupta, J. 1990.  Some socio-economic and management aspects of farm forestry.  In Studies on Social Forestry in India.  Edited by P.M. Shingi.  RAPA Publication 199/1.  FAO, Bangkok and IIM, Ahmedabad: 97–103.

Hall, D.O. and P.J. de Groot. 1985.  Biomass for fuel and food.  Paper presented at the World Resources Institute Symposium on Biomass Energy System Building blocks for sustainable agriculture, Virginia, USA: 158 pp.

Hegde, N.G. 1987. Scope for increasing the profitability of social forestry programme.  In Social Forestry for Rural Development.  Ed. By P.K. Khosala and R.K. Kohli.  Indian Society of Tree Scientists, Solan: 68-85.

Hegde, N.G. 1991. Impact of Afforestation Programme on Socio-economic transformation of the Rural Poor.  Ph.D. Thesis, Pune University, Pune: 299 pp.

Muranjan, S.W. 1987. Management of Social Forestry in Maharashtra. Gokhale Institute of Politics and Economics, Pune: 199 pp.

NCAER. 1988.  A review of social forestry projects and programmes in selected states in India.  National Council of Applied Eco. Research.  New Delhi: 71 pp.
Sathe, P.G. 1990.  A system research approach for social forestry in Maharashtra.  Report prepared for USAID and Government of Maharashtra, Pune: 98 pp.

Saxena, N.C. 1988.  Wastelands development for rural needs.  Some policy issues.  In Wastelands development for fuelwood and other rural needs.  Regional Wood Energy Development Programme in Asia.  Field Document No. 19.  FAO, Bangkok: 149 – 166.

Saxena, N.C. 1989. Development of degraded village lands in India.  Experiences and Prospects.  GCP/RAS/111/NET.  Field Document No.15.  FAO, RWEDP, Bangkok : 55 pp.

Shingi, P.M.  1988. Status and prospects for forestry extension in India: An introduction to papers.  In Planning Forestry Extension Programmes – India.  Edited by P.M. Shingi and C.P. Veer.  IIM, Ahmedabad, RWEDP, FAO, Bangkok: 1-8.

Singh, G. 1985.  Impact of social forestry project on locals – A Case study in Badaun Division U.P. Centre for Management in Agriculture, Indian Institute of Management, Ahmedabad.

Singh, G. 1990.  Impact of social forestry project – A case study in Badaun Division.  In Studies on Social Forestry in India.  RAPA Publication 1990/1.  Edited: P.M. Shingi.  FAO, Bangkok and IIM, Ahmedabad: 195-208.

Annexure I
Tree Species of Gardens

1.      For Outer Border

·         Silver Oak (Grevillea robusta)    
·         Ashoka, drooping variety (Polyalthia pendula)
·         Cork tree (Millingtonia hortensis)
·         Copper pod (Peltophorum pterocarpum)
·         Spethodia (Spathodea companulata)
·         Bamboos (Dendrocalamus strictus)
·         African Mahogany (Khaya senegalensis)/ Indian Mahogany (Swietenia mahagoni)
·         Shishum (Dalbergia sissoo)
·         White siris (Albizia procera)
·         Casuarina (Casuarinaequisetifolia)
·         Bengali babul (Acacia arabica) or Australian babul (Acacia auriculiformis)

2.      Along Road sides

·         Pink cassia (Cassia javanica)
·         Amaltas, local name - Bahava (Cassia fistula)
·         Gulmohar (Delonix regia)
·         Champa (Michelia champaca)
·         Bakul (Mimusops elengi)
·         Jacaranda (Jacarandamimosifolia)
·         Plumeria (Plumeriaalba)

3.      Around Lakes / Canals

·         Bottle brush (Callistemon viminalis)
·         Thin thornless bamboos (Bambusa nutans)
·         Kanchan (Bauhinia purpurea)

4.      For Groves in vacant space

·         Raintree (Samania saman)
·         Ficus (Ficus benjamina, Ficus religiosa, Ficus indica)
·         Mahogany (Swientenia macrophylla)
·         Fern tree (Filicium decipiens)

5.      In Front of Buildings 

·         Hibiscus (Hibiscussabdariffa)
·         Plumeria (Plumeriaobtuse)
·         Champa (Michelia champaca)
·         Bakul (Mimusops elengi)
·         Kanchan (Bauhinia purpurea))
·         Powder puff – Calliandra (Calliandra haematocephala)
6.      Creepers

·         Passion flower (Passiflora incarnata)
·         Wood rose (Merremia tuberosa)
·         Almonda
·         Ipomia - Magenta flowers
·         Jasmine (Jasminium officinalis)

There are many other species, which fit into these categories.  Based on the preference of individuals and availability of planting materials, these species can be selected.


Importance of tree

What is escape velocity?

$
0
0

What is escape velocity?

Escape velocity is the speed that an object needs to be traveling to break free of a planet or moon's gravity well and leave it without further propulsion. For example, a spacecraft leaving the surface of Earth needs to be going 7 miles per second, or nearly 25,000 miles per hour to leave without falling back to the surface or falling into orbit.

A Delta II rocket blasting off. A large amount of energy is needed to achieve escape velocity. Photo from Jet Propulsion Laboratory's Planetary Missions & Instruments image gallery http://www-b.jpl.nasa.gov/pictures/browse/pmi.html
Since escape velocity depends on the mass of the planet or moon that a spacecraft is blasting off of, a spacecraft leaving the moon's surface could go slower than one blasting off of the Earth, because the moon has less gravity than the Earth. On the other hand, the escape velocity for Jupiter would be many times that of Earth's because Jupiter is so huge and has so much gravity.
Body
Mass
Escape Velocity in Kilometers/ SecondEscape Velocity in Miles/Hour
Ceres (largest asteroid in the asteroid belt)
1,170,000,000,000,000,000
kg
.64
km/sec
1430.78 mph
The Moon
73,600,000,000,000,000,000
kg
2.38 km/sec
5320.73 mph
Earth
5,980,000,000,000,000,000,000
kg
11.2 km/sec
25038.72 mph
Jupiter
715,000,000,000,000,000,000,000,000 kg
59.5 km/sec
133018.2 mph
Sun
1,990,000,000,000,000,000,000,000,000 kg
618. km/sec
1381600.8 mph
Sirius B (a white dwarf star)
2,000,000,000,000,000,000,000,000,000 kg
5,200. km/sec
11625120 mph
One reason that manned missions to other planets are difficult to plan is that a ship would have to take enough fuel into space to blast off of the other planet when the astronauts wanted to go home. The weight of the fuel would make the spaceship so heavy it would be hard to blast it off of Earth!

How do we put spacecraft into orbit?

$
0
0

How do we put spacecraft into orbit?

Spacecraft like weather satellites and the Hubble Telescope need to be lifted most of the distance from the ground to their orbit. One way for them to get there is inside the nose cone of a rocket. Once the rocket reaches an altitude near the satellite's orbit height, the satellite is ejected from the rocket's nose cone and the rocket falls back to Earth, burning up upon reentering our atmosphere (so don't worry about getting hit on the head with bits and pieces of used rockets).

Space shuttle Columbia launching into space. Image from John F. Kennedy Shuttle Photo and Video Archives. http://www.ksc.nasa.gov/shuttle/photos/

Spacecraft like the Hubble Telescope are lifted into orbit by the Space Shuttle. In that case, the space shuttle itself is lifted by rockets into orbit. The spacecraft to be deployed is riding snugly in the cargo bay. At a certain height, the spacecraft is ejected and small rockets on it move it to the proper orbit altitude.

A Factor 5 water saving with a cooling systems innovation

$
0
0

A Factor 5 water saving with a cooling systems innovation

Mike Smith, Karlson Hargroves and Cheryl Desha

The Natural Edge Project

Melbourne-based manufacturer Muller Industries Australia’s new cooling system saves 80 per cent of the average water usage in commercial office buildings that use water-based cooling towers.
The 3C Cooler, from Muller Industries Australia, has been attracting great attention at both trade expos and installation sites.
Credit: Muller Industries Australia

Why is this important? One million water towers are used in such buildings globally as part of their cooling systems – this innovation eliminates the need for any water cooling towers at all, saving water and reducing health risks.
Many commercial and public buildings, and in particular larger buildings, have water cooling systems which use cooling towers. They can account for up to 30 to 40 per cent of a building’s water use.
Water cooling systems process and remove heat from the building, essentially by evaporating water. The evaporation of 1 litre of water absorbs more heat than any other liquid in the same conditions, which is why water-based cooling towers are installed on so many buildings. In an office with 10 000 m2 of floor space, roughly 2 megalitres of water will be evaporated each year using water cooled systems.
The main alternatives to water cooling systems are dry cooling systems, which do not use any water at all but tend to use a lot more energy. Given that it is important in a carbon constrained world to reduce energy usage, dry cooling systems are no longer going to be a viable alternative in commercial or office buildings.
A new hybrid dry air/water cooling system, developed by Muller Industries Australia, enables reductions in water usage of around 80 per cent while still being almost as energy efficient as water cooled systems. The Muller 3C Cooler uses air to cool in ambient temperatures, only uses water under extreme conditions, and is designed so that it can be retrofitted, easily replacing water cooled systems and their water cooling towers.
The main Royal Women’s Hospital building in Melbourne is now cooled by 3C units.
Credit: Muller Industries Australia

The cooler consumes 30 per cent less energy than other air-conditioning systems, and uses only slightly (5–10 per cent) more energy compared to water cooled systems. It also delivers a sizeable 7 decibel (dBA) noise reduction.
What’s more, cooling towers are open systems which make ideal conditions for the propagation of the Legionella bacteria, the cause of Legionnaires’ disease, which can be fatal. The 3C Cooler, on the other hand, is a closed system, thus eliminating this risk. It therefore provides hospitals and other more ‘high risk’ public buildings with the security of knowing that their air-conditioning system dramatically reduces the chance of Legionella infection.
Currently there are over 600 installations of the Muller 3C Coolers across Australia and others in the United Kingdom, France and Asia. The cooler has been used in a range of applications, including hospitals, commercial office buildings and government buildings.
Another innovation, the Muller Dricon, is designed to be used instead of evaporative condensers to supply cool air for refrigeration. Coles Supermarkets in Australia are using this technology to reduce water usage in their refrigeration air cooling systems.
The Muller 3C and the Dricon can use rainwater and greywater, enabling them to further reduce commercial buildings’ water usage from mains water.
Melbourne University’s new Faculty of Economics and Commerce building is an example of this approach. They claim that the 12-storey building delivers carbon reductions of 73 per cent and water use reductions of up to 90 per cent. The building achieves this through reducing cooling demand by utilising natural ventilation and chilled beam cooling technology, and by the installation of Muller 3C Coolers combined with rainwater harvesting and greywater reuse.

Water Chemistry and Biological Terms

$
0
0

Water Chemistry and Biological Terms

Acidany substance that donates a proton (H+) when dissolved in a solution. In water treatment, it usually means circulating water with a pH of less than 7.0. Sulfuric acid is the most common acid used to control cooling water pH.
 
Adsorptionassimilation of molecules or other substances onto the physical structure of a liquid or solid without chemical reaction.
 
Aerationblowing or mixing of air through water to sweep out other dissolved gases and to equilibrate the water with primarily nitrogen, oxygen and carbon dioxide.
 
Aerobean organism that grows only in the presence of free (molecular) oxygen.
 
Algaea low form of plant life containing chlorophyll that generally requires sunlight and air for existence. Many are microscopic but under favorable conditions can grow sufficiently dense to plug cooling tower distributors on the decks and to interfere with water splashing in the fill. Large masses often slough off the tower and plug heat exchangers or deposit in piping.
 
Algaecidea toxic material that will kill algae. Some of the more commonly used algaecides are chlorine, copper sulfate and phenolic compounds.
 
Alkalinityan expression of the total basic anions (hydroxyl groups) that is present in a solution. It also represents, particularly in water analysis, the bicarbonate, carbonate, hydroxyl and occasionally the borate, silicate, and phosphate salts which will react with water to produce acid neutralizable anions.
 
Ammoniaa water-soluble, colorless, pungent gas with the formula NH3.
 
Ammoniumpositive ion with the formula NH4+ that forms when ammonia dissolves in water. It adds non-natural alkalinity to the water.
 
Anaerobe (strict)an organism that grows only in the absence of free oxygen (e.g., sulfate reducing bacteria).
 
Anaerobe (facultative)an organism that can grow under either aerobic or anaerobic conditions.
 
Aniona negatively charged ion.
 
Anodea positively charged electrode that, during electrolysis, attracts anions.
 
Anodic areaarea on a metal surface where electrons are given up and metal dissolves (corrosion).
 
Antifoaman agent that prevents foam from forming or reduces its presence.
 
Atomic numbera number given to each element representing the number of protons in one atom of that element.
 
Atomic weightweight (in grams) of 6.02x1024 atoms of a particular element. The weight of an atom of any element compared with that of oxygen that is considered to be 16.
 
Autotrophican organism that is capable of producing its own food through the use of chlorophyll and light.
 
BacteriaUnicellular microorganisms which reproduce by fission or spores, identified by their shapes: coccus, round; bacillus, rod shaped; and spirillum, curved.
 
Bicarbonate alkalinityin a water solution, the presence of ions resulting from the hydrolysis of carbonates when these salts react with water. A strong base and a weak acid are produced and the solution is alkaline. Its formula is HCO3-, but its concentration is usually denoted as ppm as CaCO3.
 
Biocidea chemical that is designed to control the population of troublesome microbes by killing them.
 
Biological depositwater-formed deposits of organisms or their waste products (example: slimes, barnacles, etc.).
 
Biostata chemical that is designed to control the population of troublesome microbes by inhibiting their reproduction and subsequent increase in population.
 
Blowdownwater discharged from the system to control concentration of salts or other impurities in the circulating water.
 
Carbonate hardnesshardness in water caused by bicarbonates of calcium and magnesium. If alkalinity exceeds total hardness, all hardness is carbonate hardness; if hardness exceeds alkalinity, the carbonate hardness equals the alkalinity.
 
Cathodea negatively charged electrode (which attracts cations in electrolysis).
 
Cationa positively charged ion resulting from dissociation of molecules in solution.
 
Chemical dosagethe amount of chemical added to a system, usually expressed as ppm, or pounds of chemical per million pounds of water.
 
Chloraminea compound formed when chlorine reacts with ammonia or a chemical containing the ammonium ion. The result is mono-, di-, tri-, and organochloramines. The resulting chloramines are weak oxidants or nonoxidants. They are a component of total chlorine. These are very weak biocides.
 
Chlorinationadding chlorine or a chlorine derivative to water to prevent the growth of various organisms that cause biofouling.
 
Chlorination, dechlorinationthe act of removing chlorine from water, usually via a reducing agent or strong aeration.
 
Chlorinea poisonous yellow gas with chemical symbol Cl2 used for water treatment. It is soluble in water but can be removed by reducing aeration and reaction with sunlight.
 
Chlorine demandthe relation of the amount of chlorine to be added to a system to react with chlorine-oxidizable material until a free residual in a given system is achieved.
 
Chlorine dioxidea compound with the symbol ClO2, used mainly for bleaching wood pulp for paper. It is also used for the taste and odor control of phenolic compounds in water and can be used as a disinfectant in cooling towers.
 
Chlorine, freethe total amount of hypochlorous ion and hypochlorous acid in the system.
 
Chlorine, residualthe amount of available chlorine present in water at any given time subsequent to the addition of chlorine.
 
Circulating water ratequantity of water pumped from the tower basin to the equipment to be cooled, usually expressed as gallons per minute (gpm).
 
Combined Chlorine (new)the amount of chloramine or chloro-organic compounds present in water.
 
Compoundssubstances formed from the chemical bonding of two or more atoms.
 
Concentrationthe process of increasing solids per unit volume of solution, usually by evaporation of the liquid; also, the amount of material dissolved in a unit volume of solution. This occurs in a cooling tower due to evaporation that cools the water. It is normally expressed directly as ppm or indirectly as mhos conductivity.
 
Conductivitythe ability of water to conduct electricity. When measured with a standard apparatus, it is called specific conductivity and is a function of the total ionic dissolved solids. As a rule of thumb, TDS = 2/3 specific conductance measured as micromhos.
 
Cooling waterwater circulated through a cooling system to remove heat from certain areas.
 
Copper alloysmetals made from a mixture of copper and another metal (Example brass = copper + zinc).
 
Corrosionto be dissolved away, usually by oxidation or acidification. This usually refers to metal loss in cooling systems, often recognized by the local reaction of the dissolved metal with oxygen, carbon dioxide, acids or galvanic action. May result in general (widespread) or pitting loss of the metal.
 
Corrosion coupona small piece of metal that is inserted into a circulating system that can be analyzed to find the corrosive nature of the system's water.
 
Corrosion fatiguethe weakening of a pipe or similar piece of metal due to corrosion acting on it.
 
Corrosion inhibitorchemical used in a system to prevent corrosion.
 
Cycles of Concentrationcompares dissolved solids in makeup water with solids concentrated through evaporation in the circulating water. Since chlorides are soluble in water, for example, the cycles of concentration are equal to the ratio of chlorides in circulating water to chlorides in makeup water.
 
Deflocculationthe ability of some materials such as polyphosphides to peptize and disperse suspensions of colloidal particles.
 
Delignificationthe dissolving of the lignin portion of cooling water wood usually by strong alkaline and/or oxidizing agents.
 
Denitrificationthe removal of nitrogen from a system. This may be done chemically or biologically.
 
Disinfectingto remove microorganisms from a particular surface or liquid.
 
Dispersanta chemical that causes particulates in a water system to remain in or be placed into suspension.
 
Dissolved gasestotal gases dissolved in a liquid.
 
Dissolved solidstotal solids that have been dissolved into a liquid. They may be ionic and/or polar in nature.
 
Driftwater lost from a cooling tower as liquid droplets entrained in the exhaust air. It is independent of water lost by evaporation. Units may be in lbs./hr. or percentage of circulating water flow. Drift eliminators control this loss from the tower.
 
Electrodeconductor that carries an electrical charge.
 
Electrolytea chemical compound that dissociates or ionizes in water to produce a solution that will conduct an electric current; an acid, base, or salt.
 
Elementssubstances that cannot be divided into smaller units without nuclear destruction.
 
Equivalent weightmolecular or atomic weight divided by the valence of the substance being considered.
 
Evaporation losswater evaporated from the circulating water into the atmosphere by the cooling process.
 
Evaporation ratethe rate at which a liquid turns into gas and leaves a system.
 
Fatigue, corrosionThe weakening of a piece of metal or pipe due to corrosion.
 
Ferrobacillusa type of iron-reducing bacteria.
 
Filamentous bacteriabacteria with a long, threadlike shape.
 
Float valvea valve that is actuated by a float, generally used to control makeup water supply to a cooling system.
 
Flocculationthe process of agglomerating coagulated particles into settleable flocs, usually of a gelatinous nature.
 
Flow control valvea manually controlled valve generally located in the hot water supply line used to increase or decrease the flow of a liquid in a system.
 
Fungisimple, plant-like life forms that lack true roots, stems, leaves, and chlorophyll. They are filamentous in structure (e.g., mushrooms, mildews, molds, and yeasts).
 
Galvanic attackcorrosion behavior caused by the current generated when one metal type is in contact with a different metal type.
 
Galvanic corrosioncorrosion formed from galvanic attack.
 
Galvanic couplethe contact of one metal type with another as seen with a steel bolt in an aluminum sheet or a copper joint on an iron pipe, which allows a differential current to be generated.
 
Groundwaterwater pumped from underground rivers, wells and lakes.
 
Half lifein water treatment, the time it takes to lose " of a slug fed product from the system through blowdown, drift and windage when taking into account its continuous concentration by evaporation and dilution by fresh makeup.
 
Hardness, calciumthe calcium compounds dissolved in water, usually expressed as calcium carbonate.
 
Hardness, carbonatethe calcium and magnesium carbonate and bicarbonate dissolved in water, expressed as calcium carbonate. Other metallic cations such as ferrous iron, barium, zinc and manganous ions are also included.
 
Hardness, magnesiummagnesium compounds dissolved in water, expressed as calcium carbonate.
 
Hardness, noncarbonatethe difference between the total hardness and the total alkalinity of a water.
 
Hardness, permanentthe hardness that cannot be removed from water by precipitation reactions. Essentially, the same thing as the non-carbonate hardness.
 
Hardness, temporarythe hardness that can be removed from water by precipitation. Essentially, the same as the carbonate hardness.
 
Hardness, totalthe sum of the calcium and the magnesium hardness. Also the sum of the permanent hardness and temporary hardness. The U.S. Geological Survey hardness criteria for potable water are: soft water 0-60 ppm, moderately hard water 61-120 ppm, hard water 121-180 ppm, very hard water >180 ppm.
 
Heat exchangera device for transferring heat from one substance to another. Heat transfer can be by direct contact, as in a cooling tower, or indirect, as in a shell and tube condenser. Can also be the tube or fin tubed bundles in a wet/dry tower.
 
Heat loadheat removed from the circulating water within the tower. It may be calculated from the range and the circulating water flow.
 
Unit: Btu/hr.=gpmx500x(HWT - CWT).
 
Impuritiesany substance that contaminates another.
 
Iron bacteriaoxidative bacteria that cause taste, staining, and odor problems in water. The precipitation of iron by the bacteria can build up in piping and heat exchangers to restrict water flow. Although they are not a direct cause of corrosion, differential aeration cells will form under deposits and localized corrosion will appear.
 
Langelier's Indexa formula for predicting whether water will tend to dissolve or precipitate calcium carbonate.
 
Makeupwater added to the circulating water system to replace water lost from the system by evaporation, drift, blowdown, and leakage.
 
Microorganisman organism that is too small to be studied without the aid of a microscope.
 
Molluscicidea material that will kill molluscs.
 
Nonoxidizing biocidea biocide whose effectiveness depends on some property other than its ability to oxidize organic material (i.e., systematic poisons and surface activity).
 
pHthe logarithm of the reciprocal of the hydrogen ion concentration. Water with a pH of 7 is neutral at room temperature. A pH greater than 7 indicates alkaline water. A pH less than 7 indicates acidic water.
 
Phosphatesinorganic ions comprised of phosphorous and oxygen.
 
Photosynthesisthe process by which plants use sunlight to produce energy by consuming CO2 and releasing O2.
 
Residual chlorine(see chlorine, free) the amount of available chlorine present in water at any specified period, subsequent to the addition of chlorine.
 
Ryznar Indexan empirical method, often used in combination with the Langelier's Index, to predict the scaling tendencies of water. It is based on a study of operating results with water of various saturation indices.
 
Scalethe deposition on heat transfer surfaces of material normally in solution, as opposed to fouling, which is deposition of material normally in suspension.
 
Slimea deposit build-up directly related to the excessive growth of microorganisms that secrete or form thick, sticky material. These slimes cause tube pluggage, reduce heat transfer, entrap migratory suspended solids and can result in underdeposit corrosion.
 
Solubilitythe ability of one material (the solute) to dissolve in another (the solvent).
 
Solutionsliquid mixtures that are uniform throughout.
 
Sulfate-reducing bacteriagroup of anaerobic bacteria capable of reducing sulfates to sulfides, especially hydrogen sulfide, a very corrosive gas.
 
Surfactantin water, any molecule that modifies the interfacial tension of a liquid and the surface it contacts (surfaces can be air, metal, biomass, etc.).
 
Suspended solidsinsoluble particles suspended in water
 
Synergismthe condition existing where the effect of two or more materials added to water is greater than the sum of their individual effects
 
Thermophilica type of bacteria that thrives in very high temperatures.
 
Total Chlorine (new)the total amount of all types of chlorine compounds present. This includes Cl2, hypochlorous acid, hypochlorite ion, and all the chloramine compounds. Free Chlorine + Combined Chlorine = Total Chlorine.
 
Total Dissolved Solidsthe sum of the organic and inorganic materials dissolved in water.
 
Tuberculationlocalized attack typified by the formation of inverted pliable conical structures. In water systems, tuberculation is more commonly associated with localized corrosion of iron and the conical structures are predominately made up of several oxidation states of iron (Fe2O3, Fe3O4, etc.). Pitting is normal result.
 
Turbiditythe interference to light transmission caused by suspended solids usually colloidal in nature.
 
Water-formed depositany accumulation of insoluble material derived from water or formed by the reaction of water upon surfaces, including scale, sludge, foulants, sediments, corrosion products or biological deposits.


Terms | Definitions | Abbreviations | Letter symbols

Definitions

Access tunnelOpening in natural draft tower used for access to the cold water basin. It can be large enough for a man only, or large enough for mechanical equipment.
 
Air flowTotal amount of dry air and associated water vapor flowing through the tower, measured in cubic feet per minute at the exhaust from the tower and converted to standard air which has a density of 0.075 lb. per cu. ft.
 
Air horsepowerThe measure of useful power required to move a given air rate against a given resistance. The ratio of air horsepower to fan input horsepower is the measure of fan efficiency.
 
Air inletOpening in cooling tower through which air enters a tower. On induced draft towers, the air inlet is commonly called the louvered face.
 
AlgaeA low form of plant life which generally requires sunlight and air for existence. Causes plugging of heat exchanger tubes and cooling tower distribution systems, and fill.
 
AlgaecideA toxic material which will retard or prevent the growth of algae and slimes. Some of the more commonly used algaecides are chlorine, copper sulfate and phenolic compounds.
 
AmbientThe atmosphere which is adjacent to but not affected by the cooling tower. Generally, this means upwind of the tower, and the other areas where other heat producing equipment is located that supplies extraneous sources of heat to the air coming to the tower.
 
Ambient dew pointThe ambient temperature in oF when dew begins to be deposited.
 
Ambient wet-bulb temperatureThe wet-bulb temperature that is measured in accordance with the definition of ambient. Readings are obtained by means of a mechanically aspirated psychrometer.
 
Anchor boltA threaded bolt embedded in a concrete basin or fitted to supported members, to which an anchor casting is attached.
 
Anchor castingA device for attaching the tower structure to the foundation; it does not include the anchor bolt. Also known as Column Anchor.
 
ApproachThe difference between the cold water temperature in oF and the ambient or inlet wet-bulb temperature in oF.
 
Atmospheric towerOne in which air movement through the tower is dependent upon atmospheric conditions, not induced by mechanical fans.
 
Basin(see Cold Water Basin and Distribution Basin).
 
Basin curbThe top level of the retaining wall of the cold water basin; usually the datum point from which tower elevation points are measured.
 
Basin sump(see Sump).
 
BayThe volume between adjacent columns.
 
Beam(see Joist).
 
BentA line of structural framework composed of columns, girts or ties; a bent may incorporate diagonal bracing members.
 
Bevel washerA metal fitting used to accommodate through-bolts to angular position of a diagonal member, usually connecting to columns or other framework members.
 
BHP(abbr) (see Brake Horsepower).
 
Blow outWater that is blown or pulled out of the air inlet by wind.
 
BlowdownWater discharged from the system to control concentration of salts or other impurities in the circulating water.
 
BlowerA squirrel-cage type of air moving device usually applied for operation at higher than normal static pressures or for sound control reasons.
 
Brace(see Diagonal).
 
Brake horsepower (bhp)The actual power output of an engine or a motor.
 
British thermal unit (Btu)The quantity of heat required to raise the temperature of one lb. of water 1oF.
 
Caissons(see Foundation).
 
Canopy (Natural draft tower)Connects the hyperbolic shell to the cooling section, acting as an air conduit and air seal between the two.
 
Capacity(see Thermal Capacity).
 
CasingA vertical enclosing sidewall or endwall of a tower, exclusive of the louvers.
 
Casing panelA pre-assembled or pre-cut unit of the casing.
 
CellThe smallest tower subdivision which can function as an independent unit with regard to air and water flow; it is bounded by exterior walls or partitions. Each cell may have one or more fans or stacks and one or more distribution systems.
 
Cell dimensions(a) Width: dimensions perpendicular to tower longitudinal axis and usually at right angles to the louver area; (b) Length: dimension parallel to longitudinal axis and the plane where louvers are usually placed; (c) Height: distance from basin curb to top of fan deck but not including fan stack. Nominal width and length are measured from and to the column center lines.
 
Circulating water rateQuantity of hot water entering the tower.
 
Coil shedPortion of the tower structure housing atmospheric (tubular) heat exchangers.
 
Cold water basinA device underlying the tower to receive the cold water from the tower and direct its flow to the suction line or sump.
 
Cold water temperature (CWT)Temperature of the water entering the cold water basin before addition of make-up.
 
ColumnFramework member; a main vertical supporting member in the tower framework.
 
Column anchor(see Anchor Casting).
 
Concentration(see Water Loading).
 
Concrete cooling towerCooling tower in which the structure is made of concrete.
 
Cooling range(see Range).
 
Counterflow towerOne in which air, drawn in through the louvers (induced draft) or forced in (forced draft) at the base by the fan, flows upward through the fill material and interfaces counter currently with the falling hot water.
 
Cross strutsFramework that holds up the hyperbolic shell of a natural draft tower. The number of cross struts varies according to shell size.
 
Crossflow towerOne in which air, drawn or forced in through the air intakes by the fan, flows horizontally across the fill section and interfaces perpendicularly with the falling hot water.
 
CWT(abbr.) (see Cold Water Temperature).
 
Cycles of concentrationCompares dissolved solids in make-up water with solids in the circulating water. Since chlorides are soluble in water, for example, the cycles of concentration are equal to the ratio of chlorides in circulating water to chlorides in the make-up water.
 
Cylinder(see Fan Stack).
 
DBT(abbr.) (see Dry-Bulb Temperature).
 
Deck Batt(see Splash Bar).
 
Deck StringerHolds the splash bars of the fill deck in a fixed position with respect to air and water flow.
 
Deck supportA horizontal member supporting the fill decks.
 
Design conditionsDefined as the hot water temperature (HWT) cold-water temperature (CWT), water flow and wet-bulb temperature (WBT) in mechanical draft towers. In natural draft towers; HWT, CWT, GPM, WBT plus either dry bulb temperature (DBT) or relative humidity (RH). Allowable noise level also applies to both.
 
De-silting sumpThe area in the cold water basin, usually at a low point, where silt can be flushed to a drain.
 
Diagonal(see also Cross Struts for Natural Draft Tower) A framework member; a load bearing member transmitting forces at other than a right angle with reference to columns or horizontal ties. Also known as Brace.
 
Diffusion deckA fill deck that is located directly under the distribution basin or nozzle bank. The purpose of this deck is to receive water from the basin or nozzle and distribute it uniformly over the fill decks.
 
Discharge stack(see also Fan stack) A walled enclosure extending upward above the eliminators to direct exhaust air vertically away from fans in a forced draft tower. See Fan Stack for operation in induced draft towers.
 
Distribution basinA shallow pan-shape basin used to distribute hot water over the tower fill.
 
Distribution boxUsed in conjunction with the manifold and valve assembly in a crossflow tower to disperse the hot water uniformly in all directions thereby increasing the effectiveness of the distribution nozzles.
 
Distribution headerPipe or flume delivering water from inlet connection to lateral headers, troughs, flumes, or distribution basins.
 
Distribution nozzle(see Nozzle and next entry).
 
Distribution systemThose parts of a tower, beginnings with the inlet connection, which distribute the hot circulating, water within the tower to the points where it contacts the air. In a counterflow tower, this includes the header, laterals, and distribution nozzles. In a crossflow tower, the system includes the header or manifold, valves, distribution box, basin pan, and nozzles.
 
Double-flow water-cooling towerA crossflow tower with two fill sections and one plenum chamber, which is common to both.
 
DownspoutA short vertically placed pipe or nozzle used in a gravity distribution system to divert water from a flume or lateral to a splasher.
 
DriftWater lost from the tower as liquid droplets entrained in the exhaust air. It is independent of water lost by evaporation. Units may be in lbs./hr. Or percentage of circulating water flow. Drift eliminators control this loss from the tower.
 
Drift eliminatorsAn assembly constructed of wood, plastic, cement board, or other material that serves to remove entrained moisture from the discharged air.
 
DriverPrimary drive for the fan drive assembly. It may be an electric motor, gas engine, steam turbine, hydraulic motor, or other power source.
 
Drive ShaftA device including couplings for transmitting torque from the driver to the speed reducer.
 
Dry-bulb temperature (DBT)The temperature of the inlet or ambient air adjacent to the cooling tower as measured by a dry-bulb thermometer.
 
Effective volume(see Net Effective Volume).
 
Eliminator(see Drift Eliminator).
 
Eliminator baffle(see Eliminator Board).
 
Eliminator blade(see Eliminator Board).
 
Eliminator board The smallest component in a wood drift eliminator assembly which is usually installed in a fixed position at an angle to the direction of air flow. Also known as Eliminator Baffle (Blade).
 
End wallThe wall on the end of the tower structure.
 
Entering airAir from the atmosphere surrounding the cooling tower which enters through the louvers on an Induced draft tower or is discharged into the tower by a fan on a Forced Draft Tower.
 
Entering wet-bulb temperatureAverage wet-bulb temperature of the entering air. Includes any effects of recirculation.
 
Evaporation lossWater evaporated from the circulating water into the atmosphere by the cooling process.
 
Exhaust airThe mixture of air and its associated vapor leaving the tower (see Air Flow).
 
Exhaust wet-bulb temperatureaverage wet-bulb temperature of the air discharged from the tower.
 
Exit basin temperatureTemperature of the circulating water leaving the cold water basin if blowdown or make-up is added to the basin, the temperature will be affected accordingly.
 
Exit diameterDiameter of the shell at the top in a hyperbolic natural draft tower or at the top of a fan stack.
 
FanA device for moving air in a mechanical draft tower. The fan design may be either an axial flow propeller or centrifugal blower. The fan can be applied as induced draft or forced draft.
 
Fan deckThe surface enclosing the top of an induced draft tower. In a counterflow tower, the fan deck covers the entire top surface of the tower. In a crossflow tower, the open fan deck covers only the tower plenum area, leaving the distribution system exposed. An extended fan deck encloses the distribution system and covers the entire top surface of the tower.
 
Fan drive assemblymechanical components furnishing power to the fan, usually consisting of driver, drive shaft, speed reducer, and supporting members.
 
Fan driver inputHorsepower input to the driver. For 3-phase alternating current (ac) motors:
hp = (amps x volts x 3 x Power Factor x Efficiency) / 746
 
Fan driver outputBrake horsepower output of the driver to the drive shaft. Fan driver input x motor efficiency.
 
Fan guardA protective screen installed either at the inlet of a forced draft fan or at the exit of an induced draft fan.
 
Fan pitchThe angle that a fan blade makes with the plane of rotation.
 
Fan ring(see Fan Stack).
 
Fan stackCylindrical or modified cylindrical structure in which the fan operates. Fan stacks are used on both induced draft and forced draft axial flow propeller fans. Also known as Cylinder.
 
Fan stack heightDistance from top of fan deck to top of fan stack.
 
Fan support(see Mechanical Equipment Support).
 
Fill barsThe assembly of splash bars comprising the tower filling. Fill bars intercept the downward fall of water at regular intervals, forming splash surfaces which cause water drops to break into smaller droplets, and provide wetted surfaces for air-water contact.
 
Fill-deckThe assembly of splash bars comprising the tower filling. (See Fill Bars for description of operation in a crossflow tower.)
 
Fill hangerSupport system in a crossflow tower for fill bars which hold fill in place.
 
Fill support(see Deck Support).
 
FillingThat part of a crossflow, counterflow, or natural draft tower consisting of splash bars, vertical sheets of various configurations, or honeycomb assemblies, tile or other materials, which are placed within the tower to effect heat and mass transfer between the circulating water and the air flowing through the tower.
 
FirewallA double wall between cells used to isolate a fire portion system and designed according to NFPA 214.
 
Flexible shaft(see Drive Shaft).
 
Float valveA valve that is actuated by a float, generally used to control make-up water supply.
 
Flow control valveA manually controlled valve generally located in the hot water supply line.
 
FlumeA trough, which may be totally enclosed or open at the top. Flumes are used in counterflow cooling towers for the manifold pipe laterals to distribute the hot water over the fill.
 
FoggingA fog condition created when the exhaust air or plume from a cooling tower becomes supersaturated so that part of the water vapor condenses into visible liquid droplets.
 
Forced draft water cooling towerType of mechanical draft tower in which one or more fans are located at the air inlet to force air into the tower.
 
FoundationSupport material beneath the tower.
 
Framework membersThe structural members designed to support all live and dead loads. They consist of columns, horizontal ties, diagonals and joists and beams. Can also include shear walls if designed accordingly as in a concrete tower.
 
Gear reducerA reduction gear, commonly used on fan drivers to reduce driver speed to fan speed requirements. Also known as Speed Reducer.
 
Girt(see Horizontal Tie).
 
GPM(abbr.) Gallons per minute
 
HandrailA horizontal or sloping rail placed along an access way or at the edge of a platform. Usually at 3'-6" above the walkway or floor. (See Safety Handrail. See OSHA for design criteria.)
 
HeaderIn a counterflow tower, the main pipe carrying hot water to a series of laterals for distribution over the fill material. In a crossflow tower, it is the main pipe carrying hot water to the distribution basin of each cell. (See Manifold.)
 
Heat exchangerA device for transferring heat from one substance to another. Heat transfer can be by direct contract, as in a cooling tower, or indirect, as in a shell and tube condenser. Also known as filling. Can also be the tube or fin tubed bundles in a wet/dry tower.
 
Heat loadHeat removed from the circulating water within the tower. It may be calculated from the range and the circulating water flow.
Unit: Btu/hr.= gpm x 500 x (HWT - CWT).
 
Horizontal tieA horizontal connection member in the tower framework. Also known as Girt.
 
Hot water temperature (HWT)Temperature of circulating water entering the distribution system.
 
Hydrogen ion concentration (pH)A scale for expressing acidity or alkalinity of the circulating or make-up water. A pH below 7.0 indicates acidity and above 7.0 indicates alkalinity. A pH of 7.0 is neutral.
 
Hyperbolic towerA cooling tower of hyperbolic shape, which depends on natural draft for air movement through the tower. Can be either crossflow or counterflow tower. (See Natural Draft Tower.)
 
Induced draft water cooling towerType of mechanical draft tower in which one or more fans are located in the air outlet to induce air flow through the air inlets.
 
Inlet air(see Entering Air).
 
Inlet connectionFitting to which the circulating water supply piping is connected to serve the tower distribution system. Also known as Inlet Flange.
 
Inlet wet-bulb temperatureThe average of the wet-bulb temperature obtained from several stations located on both the windward and leeward sides of the tower.
 
JoistSupports for fan decking, or for film fill modules.
 
LadderTypical rung-and-rail device providing access on outside or inside of the tower.
 
Ladder cageProtective cage parallel with and connecting to a vertical access ladder.
 
LandingA horizontal flooring, designed to provide offset clearances for stairways, ladders, or other access arrangements.
 
Lateral headerA pipe or flume distributing water from the distribution header to nozzles, or from other points of discharge to the filling area.
 
LongitudinalAlways measured parallel to air intakes and perpendicular to air flow.
 
LouversMembers installed horizontally in a tower wall to provide openings through which the air enters the tower while also containing the falling water within the tower. Usually installed at an angle to the direction of air flow to the tower.
 
Make-upWater added to the circulating water system to replace water lost from the system by evaporation, drift, blow-down, and leakage.
 
ManifoldThe main header pipe in a crossflow tower. (See Header.)
 
MasticA compound usually made up of asphalt and asbestos fiber with suitable solvents and fillers which can be used to seal joints and cracks against leakage of water.
 
Mechanical draft water-cooling towerA tower through which air movement is effected by one or more fans. There are two main types: Forced draft with fans located at the air inlet; Induced draft with fans located at the air exhaust.
 
Mechanical equipment supportMembers, which comprise the primary support for the fan, drive assembly. Normally steel or concrete.
 
Motor rated horsepowerHorsepower rating inscribed on name-plate of the motor driving the fan. (See Rated Horsepower.) Unit: hp.
 
Natural draft water-cooling towerOne in which air movement is dependent upon the difference in density between the entering air and internal air. As the heat of the water is transferred to the air passing through the tower, the warmed air tends to rise and draw in fresh air at the base of the tower. (See Hyperbolic Tower.)
 
Net effective volumeThat portion of the total structural volume with in which the circulating water is in intimate contact with the air flow through the tower. Unit: ft.3.
 
Nominal tower dimensionsWidth and length measured from and to column centerline or walls; height measured from basin curb to top of fan deck (counterflow design) or to top of distribution basin (crossflow design). Unit: ft.
 
NozzleA device for controlled distribution of water in a cooling tower. Nozzles are designed to deliver water in a spray pattern by pressure or by gravity flow.
 
Obstruction lights or Aviation warning lightsWarning lights required by FAA regulations, placed on the outside of the hyperbolic shell of a natural draft tower.
 
Overall tower dimensions(a) width: overall dimensions perpendicular to the tower's longitudinal axis; (b) length: overall dimension parallel to the air inlet louvers and the longitudinal axis; (c) total height: distance from basin curb to top of fan stack. Dimensions measured in feet.
 
Packing(see Filling).
 
PartitionAn interior wall subdividing the tower into cells or into separate fan plenum areas.
 
PedestalsUsed as a transition from the cross struts to the foundation of a natural draft tower or fan mount in force draft towers..
 
pH(see Hydrogen Ion Concentration).
 
PierIn a wood tower an exterior or interior column support used to elevate column footings above the basic floor or foundation grade. Also known as Internal Pier.
 
PilasterAn exterior column support, usually an integral part of the basin wall. Also known as External Pier. Used as a central point to establish the elevation of framework members.
 
Piles(see Foundation).
 
Pitot tubeAn instrument that operates on the principal of differential pressures. The primary use on cooling towers is the measurement of circulating water rate.
 
PlenumThe enclosed space between the eliminators and the fan stack in induced draft towers or the enclosed space between the fan and the filling in forced draft towers.
 
PlumeVisible exhaust from a cooling tower. (See Fogging.)
 
Power FactorThe ratio of true power (watts) to the apparent power, as indicated by the product of amps x volts.
 
PsychrometerAn instrument used primarily to measure the wet-bulb temperatures. Either a sling or a mechanically aspirated type of psychrometer is acceptable provided the instrument is properly shielded from radiation and the air across the wick is limited to approximately 1,000 ft./min.
 
RangeDifference between the hot water temperature and the cold water temperature. Also known as Cooling Range.
 
Rated horsepowerNameplate horsepower of fan drivers. Unit: hp.
 
RecirculationThis term describes a condition in which a portion of the discharge air enters the tower along with the fresh air. The amount of recirculation is determined by tower design, tower placement, and atmospheric conditions. The effect is generally evaluated on the basis of the increase in the entering wet-bulb temperature compared to the ambient.
 
Redistribution basinan elevated basin installed between the hot and cold water basins in a crossflow tower to maintain correct water distribution through out the entire height of the fill.
 
Relative Humiditythe ratio of the mole fraction of water vapor present in the air to the mole fraction of water vapor present in saturated air at the same temperature and barometric pressure.
 
Ring BeamFooting that carries the loads from the shell of a Natural Draft Tower.
 
RiserPiping which connects the circulating water supply line from the level of the base of the tower to the supply header of the tower inlet connection.
 
Safety handrailRailing around top of tower, platforms, and stairways; usually composed of top handrail, kneerail, and toeboard. (See Handrail.)
 
Shell diameterDiameter of the shell in a natural draft tower at the top of the curb, measured from inside of cross struts to inside of cross struts.
 
Shell heightDimension from top of curb to top of the hyperbolic shell in a natural draft tower.
 
Single-flow water-cooling towerA crossflow tower having a fill section on one side of the plenum chamber only.
 
SoffittThe underside of the lintel beam in a natural draft tower forming the bottom part of the hyperbolic shell. Generally it is thick at the base and is the first portion of the shell above the diagonals or columns, which carry the shell.
 
Speed reducer(see Gear Reducer).
 
Splash barHorizontal component of a fill deck, which constitutes the principal splash surface.
 
Splasher or Splash plateUsed in a gravity distribution system to receive water from a down spout and effect uniform spreading of the water over the wetted area of the tower.
 
Spray-filled water-cooling towerA tower, which has no fill, and water to air contact depends entirely on the break-up of the water by means of pressure spray nozzles.
 
Spray nozzleDevice used in a distribution system to break up the flow of the circulating water into droplets and effect uniform spreading of the water over the wetted area of the tower.
 
Stairwaytypical tread-and-riser device providing angular access to and from the top of the structure.
 
Standard airDry air having a density of 0.075 lbs./ft.3 at 70oF and 20.92" Hg.
 
Static pressureThe pressure of a gas or fluid in a system as referred to a state of rest or lack of motion. Static pressure is equal to total pressure minus velocity pressure. Unit: lbs./in.2
 
SumpLowest portion of the basin to which cold circulating water flows: usually the point of circulating pumps suction connection. Also known as Basin Sump.
 
Supply HeaderPortion of the water supply system, which contains the valves and distribution boxes in a crossflow tower or the lateral pipes in a counterflow tower.
 
Thermal capacityThe number of gallons per minute (GPM) a cooling tower will handle for a specified range, wet-bulb temperature, and approach. Also simply known as Capacity.
 
Throat diameterDiameter of the shell in a natural draft tower at its narrowest point.
 
Total pumping headThe total head of water, measured above the basin curb, required to deliver the circulating water through the distribution system. (See Tower Pumping Head.) Units: ft.
 
Tower dimension (see Nominal or Overall Tower Dimensions).
 
Tower pumping headthat part of the "total pumping head" for which the design of the tower and the piping furnished with it are responsible. It is expressed as the head of water above the basin curb measured at the center of the inlet connecting the tower distribution system with the riser, and consists of the total pressure at the centerline of the inlet plus the vertical distance between the inlet centerline and the basin curb. Unit: ft.
 
TransverseAlways measured perpendicular to air intakes.



Abbreviations and Letter Symbols

Aapproach*
 
acfmactual cubic feet per minute*
 
altaltitude*
 
ambambient*
 
ampampere
 
atmatmosphere
 
azazimuth
 
bar.barometer
 
bhpbrake horsepower
 
BtuBritish thermal unit
 
CWTcold water temperature*
 
cu ftcubic foot
 
cu incubic inch
 
cfmcubic feet per minute (see acfm, scfm)
 
dBdecibel
 
Fdegree Fahrenheit
 
diamdiameter
 
DBTdry bulb temperature*
 
elelevation
 
fbmfeet board measure (board feet)
 
fpmfeet per minute
 
fpsfeet per second
 
ftfoot
 
gpmgallons per minute (U.S. liquid measure)
 
hphorsepower
 
HWThot water temperature*
 
hrhour
 
ininch
 
IDinside diameter
 
kw kilowatt
 
kwhrkilowatt hour
 
lin ftlinear foot
 
mphmiles per hour
 
ODoutside diameter
 
ppmparts per million
 
lbpound
 
lb per cu ftpounds per cubic foot
 
lb per hrpounds per hr*
 
psiapounds per square inch absolute
 
psigpounds per square inch gage*
 
Rrange (cooling range)*
 
Rcrecirculation percent*
 
RHrelative humidity*
 
rpmrevolutions per minute
 
secsecond
 
shpshaft horsepower
 
sp grspecific gravity
 
sq ftsquare foot
 
stdstandard
 
scfmstandard cubic feet per minute*
 
temptemperature
 
velvelocity*
 
WBTwet bulb temperature*


Letter symbols - for use in equations with appropriate subscripts

(Other units of volume or rate may be indicated):
Aarea: sq ft
 
aarea of transfer surface per unit of tower volume; sq ft per cu ft
 
cspecific heat
 
dprefix indicating differential
 
Ddiameter
 
Gmass air flow; lb dry air per hr per sq ft
 
ggravitational acceleration; ft per sec per sec
 
henthalpy of air-water vapor mixture; Btu per lb dry air
 
Kover-all enthalpy transfer coefficient. Usually expressed as lb per hr per sq ft per lb water per lb dry air.
 
Lmass water flow; lb per hr per sq ft
 
L/Gliquid-to-gas ration; lb water per lb dry air
 
tair temperature; F
 
Twater temperature; F
 
Veffective cooling tower volume; cu ft per sq ft
 
vspecific volume; cu ft per lb
 
Whumidity ratio (specific humidity); grains moisture per lb dry air (or lbs vapor per lb dry air if so indicated)
 
Ka V/Ltower characteristic

Follow safety norms or face closure, Andhra Pradesh Minister warns units

$
0
0
Minister for Infrastructure, Investments and Ports Ganta Srinivasa Rao visiting the bulk drug unit at Parawada near Visakhapatnam on Friday. Photo: A. Manikanta Kumar

Minister for Infrastructure and Investment Ganta Srinivasa Rao on Friday threatened to serve closure notices on the industries which failed to adhere to stipulations and norms prescribed for effluent treatment, fire safety, and emissions of pollutants.
After a visit to the fire-affected bulk drug unit owned by Glochem Industries Limited at Parawada, about 50 km from there, he said on the instructions of Chief Minister N. Kiran Kumar Reddy, a high-level meeting would be held at Circuit House here on Saturday to review safety precautions being undertaken by various industries.
Senior officials from the government, including Director-General of Fire Services N. Sambasiva Rao, District Collector V. Sheshadri, and Deputy Chief Inspector of Factories D. Chandrasekhar Varma would attend.
Expressing deep shock over outbreak of fire at Glochem’s unit at Jawaharlal Nehru Pharma City and fire accidents at various units at Parawada, Visakhapatnam Steel Plant, HPCL’s Visakh Refinery, Hetero Drugs Limited and Heritage Foods Limited, he said they would not hesitate to shut down those units which were not following the directives being issued by the government to them to adopt latest safety gadgets. While emphasising the importance of wooing investments in the region, he said at the same time, safety could not be compromised. He said fortunately in the fire accident that occurred at Glochem’s unit, no casualties were reported.
But still apart from industrial accidents, there had been concern among the denizens over discharge of untreated effluents and release of pollutants into the air and water bodies.
http://www.thehindu.com/news/cities/Visakhapatnam/follow-safety-norms-or-face-closure-andhra-pradesh-minister-warns-units/article4771795.ece

Fire ravages Glochem unit at Pharma City , Jawaharlal Nehru Pharma City at Parawada on the outskirts of the Greater City.Visakhapatnam

$
0
0

Fire ravages Glochem unit at Pharma City

TNNMay 31, 2013, 03.50AM IST
http://www.thehindu.com/multimedia/dynamic/01472/30stand_alone_viza_1472569f.jpg
VISAKHAPATNAM: In yet another incident that raises serious concerns over industrial safety in Visakhapatnam, a series of blasts caused by a chemical fire rocked the Glochem Industries Ltd export oriented active pharmaceutical ingredients (APIs) manufacturing unit at the Jawaharlal Nehru Pharma City at Parawada on the outskirts of the Greater City.
The sounds of the explosions caused by the highly inflammable raw material could be heard at regular intervals by the people in half a kilometer radius while the flames were visible around 5 km away from the pharma city.

Luckily there were no casualties or injuries in the fire that raged till late in the night at the Glochem facility at plot no 77 and covered the entire Pharma City with a heavy blanket of thick black smoke. It razed down four blocks A, B, C and D in the unit and one warehouse where all the raw material, some of which is explosive in nature, was stored. The cause of the fire is yet to be ascertained by the authorities.
According to sources the fire broke out in the 'B' block of the unit at around 4.30 pm when sodium hydrate chemical was being transported from 'B' block to another block. At the time of the incident more than 150 workers of the general shift were on the plant premises but only two workers were in the 'B' block. However, everyone in the unit was evacuated when the fire spreading to other areas. Lack of sufficient foam and use of water to douse the chemical fire resulted in the fire spreading throughout in the entire unit.
While some of the workers managed to save 150 drums of raw material from the warehouse, there was widespread panic as word spread that a solvent tank containing a highly explosive material could go off if the fire was not contained. More than 600 workers of the neighboring units at Pharma city gathered at the site. Eight fire tenders, including two foam tenders, were pressed into service to douse the fire, with a focus on the 25,000-liter concentrated chemical solvent tank on foam was sprinkled continuously to prevent it from becoming a major threat to people and establishments in a five-kilometer radius of the unit.
In fact, sources said the fire fighting operations were hampered after initial efforts of the state government fire safety wing used water to put out the fire but actually resulted in its spreading across the unit. It was only after the Joint Chief Inspector of Factories Chandra Sekhar Varma landed at the pharma city that they figured out that only dry chemical powder should be used. But as the powder was not available in large quantities it delayed fire fighting operations.
This is the second major fire to break out in the city within a fortnight after a fire at the Hindustan Petroluem Corporation Limited refinery at Malkapuram created panic on May 17. The fire accident, which is the fifth such major incident to rock the north coastal Andhra region in the last one year, took place in B block of the Glochem Industries limited, which makes active pharmaceutical ingredients (APIs) or intermediates.
Even as the fire raged, allegations started flying thick and fast. AITUC district secretary B Venkata Rao blamed the blaze on the sheer negligence of the company management saying that they should have made a provision for adequate foam at the facility.District collector V Seshadri, who visited the spot to monitor the fire fighting efforts, told mediapersons that an inquiry would be conducted in the matter. He also said that the safety of over 20 highly hazardous factories in the district would be reviewed. Officials of Ramky, which set up Pharma City or its fire safety committee were not available for comments.
 http://www.thehindubusinessline.com/companies/glochem-factory-gutted-in-vizags-pharma-city/article4768548.ece

Project GreenHands - World Environment Day campaign 2013

$
0
0
http://www.youtube.com/watch?v=-yBRdX2Ep-o

We know that planting trees is the simplest solution to tackling today's environmental crisis. But caught up in hectic, urban lifestyles, many of us but don't have the space or time to plant and nurture trees.

NAGARJUNA UREA_SONG

$
0
0
http://www.youtube.com/watch?v=C0S2AeTR0Mk

South-West Monsoon 2013 Update :

$
0
0
India Meteorological Department
South-West Monsoon 2013 Update :
The Southwest Monsoon has further advanced into some more parts of central Arabian Sea; remaining parts of coastal Karnataka; some parts of north interior Karnataka; most parts of south interior Karnataka; some parts of Rayalaseema; remaining parts of Tamil Nadu and southwest Bay of Bengal and some more parts of central Bay of Bengal.
Conditions are favourable for further advance of southwest Monsoon into some more parts of central Arabian Sea and Goa; some parts of south Konkan and south Madhya Maharashtra; some more parts of interior Karnataka, Andhra Pradesh and Bay of Bengal during next 2 – 3 days.


http://www.imd.gov.in/section/nhac/dynamic/mon-prog.jpg

The theme for this year’s World Environment Day celebrations is Think.Eat.Save. NFCL IS GOING TO ORGANISE PLANTATION

$
0
0
The theme for this year’s World Environment Day celebrations is Think.Eat.Save. Think.Eat.Save is an anti-food waste and food loss campaign that encourages you to reduce your foodprint. According to the UN Food and Agriculture Organization (FAO), every year 1.3 billion tonnes of food is wasted. This is equivalent to the same amount produced in the whole of sub-Saharan Africa. At the same time, 1 in every 7 people in the world go to bed hungry and more than 20,000 children under the age of 5 die daily from hunger.

Given this enormous imbalance in lifestyles and the resultant devastating effects on the environment, this year’s theme – Think.Eat.Save – encourages you to become more aware of the environmental impact of the food choices you make and empowers you to make informed decisions. 

While the planet is struggling to provide us with enough resources to sustain its 7 billion people (growing to 9 billion by 2050), FAO estimates that a third of global food production is either wasted or lost. Food waste is an enormous drain on natural resources and a contributor to negative environmental impacts.

This year’s campaign rallies you to take action from your home and then witness the power of collective decisions you and others have made to reduce food waste, save money, minimise the environmental impact of food production and force food production processes to become more efficient.

If food is wasted, it means that all the resources and inputs used in the production of all the food are also lost. For example, it takes about 1,000 litres of water to produce 1 litre of milk and about 16,000 litres goes into a cow’s food to make a hamburger. The resulting greenhouse gas emissions from the cows themselves, and throughout the food supply chain, all end up in vain when we waste food.

In fact, the global food production occupies 25% of all habitable land and is responsible for 70% of fresh water consumption, 80% of deforestation, and 30% of greenhouse gas emissions. It is the largest single driver of biodiversity loss and land-use change.

Making informed decision therefore means, for example, that you purposefully select foods that have less of an environmental impact, such as organic foods that do not use chemicals in the production process. Choosing to buy locally can also mean that foods are not flown halfway across the world and therefore limit emissions.    

So think before you eat and help save our environment!

Objective of the World Environment Day Celebration

$
0
0
World environment day 2013 theme is "Think. Eat. Save.". Our environment is the future of our world. If it is not healthy, then we can not think of taking a breath of peace.

World Environment Day 2013

Date of World Environment day

  • 5th June is celebrated as the World Environment day.

Objective of the World Environment Day Celebration

World Environment day is the main weapon of the United Nation to make people aware of the worldwide environmental demolition and drag the attention and action of various political sources and human resource.

Beginning of the World Environment Day

  • World Environment Day was resultant effort of the United Nations General Assembly in the year 1972, which took place in Stockholm Conference on the issue of Human Environment.
  • In the same platform, one more resolution was being taken place which gave birth to the UNEP.

How World Environment Day be Celebrated?

World Environment day is celebrated each year by various means like:
  • street rallies
  • bicycles parades
  • green concerts
  • essay and poster competitions in schools
  • tree planting
  • recycling efforts
  • clean-up campaigns and much more.

Resolution taken by Ministry on World Environment day

Various resolution and pledges are being taken by Prime Ministers, chief ministers and Ministers of Environment on that day. They all indulge themselves with the commitment of taking care of the world environment. Taken pledges are then established as the base of environmental management and economic planning dealt by Government.

World Environment day 2008

Place: World Environment day will be held on New Zealand. Wellington city has the honor to host this event.
World Environment Day Slogan: Kick the Habit! Towards a Low Carbon Economy
World Environment Day Objective: World Environment day is due to the fact that worldwide climate change is becoming alarming matter day by day.

Celebration mode: UNEP is doing the awareness campaigns for various countries, companies and communities to make them conscious about the greenhouse gas emissions and its reduction procedure.

The World Environment Day will take the opportunity to establish the resources which creates
low carbon economies and life-styles like:
  • improved energy efficiency,
  • alternative energy sources,
  • forest conservation and eco-friendly consumption.

World Environment day 2007

Place: World Environment day was held in New Zealand. Tromsø city had the honor to host this event.
World Environment Day Slogan: Melting Ice – a Hot Topic?
World Environment Day Objective: With the association of International Polar year, it was celebrated to make people aware of the changing climate in polar ecosystem and its community.

World Environment day 2006

Place: World Environment day was held in Algeria. Algiers city had the honor to host this event.
World Environment Day Slogan: Don't Desert Drylands!
World Environment Day Objective: This theme of Deserts and Desertification was being selected with the objective to protect the dry lands. As it is known 40% of the earth is dry land.

World Environment day 2005

Place: World Environment day was held at San Francisco in California of USA. San Francisco city had the honor to host this event.
World Environment Day Slogan: Plan for the Planet!
World Environment Day Objective: This theme was selected for Green cities. Objective behind was to make aware of the importance of greenery on this earth.

World Environment day 2004

Place: World Environment day was held at Barcelona in Spain. Barcelona City had the honor to host this event.
World Environment Day Slogan: Wanted! Seas and Oceans – Dead or Alive?
World Environment Day Objective: This theme was selected with the objective of awareness how seas and oceans are playing vital role in our life and how to treat sea and oceans.

World Environment day 2003

Place: World Environment day was held at Beirut, which is for the first time in the Arab world
Lebanon had the honor to host this event.
World Environment Day Slogan: Water - Two Billion People are Dying for It!
World Environment Day Objective: World Environment day was with the objective of keeping water safe and makes people aware how most vital resource of world plays major role in our life.
More Notes: World Environment day was held to support two more events on that year- International Year of Freshwater, 2003 and World Water Day celebrated on 22 March.
  • Moreover, logo of International Year of Freshwater had been conjugated in World Environment day logo to focus its importance.

World Environment day 2002

Place: World Environment day was held in Republic of China City of Shenzhen had the honor to host this event.
World Environment Day Slogan: Give Earth a Chance
World Environment Day Objective: World Environment day was with the objective to heal the planet after so much of destruction during 20th century. It was celebrated to make people aware for sustaining this earth a place for healthy living.

World Environment day 2001

Place: World Environment day was held at Torino in Italy and Havana in Cuba.
World Environment Day Slogan: Connect with the World Wide Web of Life
World Environment Day Objective: The theme of slogan focused on the issue that we human being should stay connected with the earth by any means, e.g. - modern technology like World Wide Web or any traditional way.

World Environment day 2000

Place: World Environment day was held at Adelaide in Australia.
World Environment Day Slogan: World Environment Million --Time to Act
World Environment Day Objective: World Environment day was with objective to make people aware that everyone from this earth should contribute something positive to save this earth from demolition.
Viewing all 8088 articles
Browse latest View live