Dewatering Polyelectrolyte
Chemtex’s Dewatering Polyelectrolyte is a high molecular wt. cationic polyelectrolyte in powder form. It is used for dewatering of organic sludge from sewage, pharma and biotechnology industry. The product is highly effective in dewatering of organic sludge from pharma effluent.Key Features and Benefits
- Economical to use-effective at very low dosage levels
- Perform well over a wide pH range
- Improve throughput and cake solids
- Achieve high solids capture
- Easily sealable in water
- Dry product minimizes storage requirement
Application and Dosage
Chemtex’s Dewatering Polyelectrolyte dry cationic polymers are recommended for the following solid-liquid separation process:
Belt filter, centrifuge, screw press dewatering- increased production rate, cake solids and solids capture.
Water clarification - improves influent, process and effluent water quality by reducing suspended solids and turbidity.
Dissolved air flotation - result in cleaner subnatants, increased float solids and greater throughput.
Filtration - improve filtered water quality and plant throughput.
Thickening - improved compaction, settling drainage and effluent quality.
Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.
Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.
Packing
Chemtex’s HIGH PH MEMBRANE CLEANER is available in HDPE containers packed in various pack sizes.