Polyelectrolye Flocculant
The Polyelectrolye Flocculant is idyllically utilized in divergent domains for applications such as water clarification, effluent treatment, product thickening. We process this flocculant under higher prudency with precise pH value to make it suitable for different industrial applications. These products are water soluble polymers that take the ionic charge all along the polymer chain.
The salient features of our flocculants are effective precipitation of dye, improvise the water clarity and superior cleaning performance. Our flocculant is ideally used in medical, biochemical, cosmetic, food, paper, oil, leather, steel and various other industries for dewatering sludge, decolorizing, effluent treatment and various other purposes.
The salient features of our flocculants are effective precipitation of dye, improvise the water clarity and superior cleaning performance. Our flocculant is ideally used in medical, biochemical, cosmetic, food, paper, oil, leather, steel and various other industries for dewatering sludge, decolorizing, effluent treatment and various other purposes.
Non-ionic Polyelectrolyte
Key Features and Benefits
- Effective at low dosage levels.
- Perform well over a wide pH range
- Improve throughput and cake solids.
- Achieve high solids capture.
- Easily sealable in water
- Dry product minimizes storage requirement.
- Multiple applications.
Application and Dosage
Chemtex’s Non-Ionic Polyelectrolyte dry PAM non-ionic flocculants should be properly dipersed and dissolved to 0.1-0.5% concentration. Dissolution should be completed around 1 hour of agitation, but will be faster in warm water. However, the temperature of water should be refrained from above 50°C. Treatment Levels (for use as)
Air Flotation Flocculants : 0.1~ 5.0 ppm
Thickening Flocculants : 0.1~ 5.0 ppm
Dewatering Flocculants : 0.1~ 1.0 ppm
Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.
Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.
Packing
Chemtex’s Non-Ionic Polyelectrolyte is supplied in 25kgs packs.