Quantcast
Channel: EHSQL(Environment-Energy ,Health,Safety, Security and Social Ac. ,Quality-Lab) Technical services
Viewing all 8140 articles
Browse latest View live

Why is the ocean blue?

$
0
0

Why is the ocean blue?

Colors from Vibrations
Crater lake, Oregon, USA, is widely known for its intense blue color and spectacular view. The appearance of the lake varies from turquoise to deep navy blue, depending on whether the sky is hazy or clear.
Garibaldi Lake
The turquoise color of Garibaldi Lake, British Columbia, Canada.
The inviting blue of a mountain lake or a sea is unique in nature, in that it is caused by vibrational transitions involving hydrogen bonding.

Why is water blue?

Water’s intrinsically blue color is easy to see when the water is sufficiently deep, such as in the Caribbean and Mediterranean Seas, and in Colorado mountain lakes. Pure water and ice have a pale blue color, which is most noticeable at tropical white-sand beaches or in ice caves in glaciers. (Green colors are usually derived from algae.) The blueness of the water is neither due to light scattering (which gives the sky its blue color) nor dissolved impurities (such as copper). Because the absorption that gives water its color is in the red end of the visible spectrum, one sees blue, the complementary color of orange, when observing light that has passed through several meters of water. Snow and ice has the same intense blue color, scattered back from deep holes in fresh snow.
Blue water is the only known example of a natural color caused by vibrational transitions. In most other cases, color is caused by the interaction of photons of light with electrons. Some of these mechanisms are resonant interactions, such as absorption, emission, and selective reflection. Others are non-resonant, including Rayleigh scattering, interference, diffraction, and refraction. Unlike with water, these mechanisms rely primarily on the interaction of photons with electrons.
The bent water molecule H2O in the free state has three fundamental vibrations. It is helpful to think of metal spheres fixed on strong springs in visualizing these vibrations. The three normal modes are: (a) the symmetrical stretch, (b) the symmetrical bend, and (c) the antisymmetrical bend.
The faint blue color of water is seen in this photo. Here, you look upwards through 3-meter long sealed aluminum tubes filled with purified water. On the left, the faintly bluish tube contains regular (light) water, and at right, the clear tube is empty.

Why vibrational?

Water owes its blueness to selective absorption in the red portion of its visible spectrum. The absorbed photons promote transitions to high overtone and combination states of the nuclear motions of the molecule, i.e. to highly excited vibrations. We know molecular vibrations color water because "heavy" water (which is chemically the same as regular water, but with the two hydrogen atoms replaced with deuterium atoms - an isotope of hydrogen with one extra neutron that makes "heavy" water about 10% heavier) has a similar absorption curve, shifted to higher wavelengths outside of the visible spectrum of light. Heavy water is thus colorless.
These graphs illustrate why water (H2O) is blue, while "heavy" water (D2O) is colorless. The graph gives the visible and near-IR spectrum of H2O and D2O at room temperature. The absorption below 700 nm in wavelength contributes to the color of water (the blue graph). This absorption consists of the short wavelength tail of a band centered at 760 nm, and two weaker bands at 660 nm and 605 nm. The vibrational origin of this visible absorption of H2O is demonstrated by comparison with the spectrum of heavy water, D2O (the gray graph). Heavy water is chemically the same as regular (light) water, but with the two hydrogen atoms (as in H2O) replaced with deuterium atoms (deuterium is an isotope of hydrogen with one extra neutron - the extra neutron that makes "heavy" water about 10% heavier). Heavy water is colorless because all of its corresponding vibrational transitions are shifted to lower energy (higher wavelength) by the increase in isotope mass. For example, the H2O band at 760 nm (the red end of the spectrum) is shifted to approximately 1000 nm in D2O. This is outside the spectrum of visible light, so heavy water has no color.
Overtones (also called harmonics) are secondary vibrations of the string, with wavelengths in integer ratios to the fundamental note.

What is the role of overtones?

In music, a note has a fundamental wavelength and pitch that depend on the nature of the vibrating air column or string. A violin string’s pitch depends first on its vibrating length, and then on its thickness and tension. Secondary notes linked to this fundamental pitch are created when the string vibrates as though split into halves, thirds, quarters, and so on. The overtones have higher pitches than the fundamental pitch, and the note we hear is a combined sound, enriched by the overtones. The relative strength of the fundamental and overtone pitches contributes to the unique sound we associate with each instrument.
Molecular vibrations also have overtones related to their fundamental wavelength. Just as we hear a musical note that is a combination of a fundamental note with its overtones, so molecules may vibrate in complex combinations of their fundamental and overtone vibrations. In water molecules, only the first few overtones make a significant contribution to the overall vibrational energy.
Hydrogen bonding (purple) is a special type of dipole-dipole bond that exists between an electronegative atom and a hydrogen atom bonded to another electronegative atom. In water, the hydrogen atom (white) is covalently attached to the oxygen (red) of a water molecule (about 470 kJ/mol) but has an additional attraction (about 22 kJ/mol) to a neighboring oxygen atom of another water molecule. Hydrogen bonding is weak compared to covalent and ionic bonding.

What is the role of "hydrogen bonding"?

Water is unique among the molecules of nature in its high concentration of O-H bonds and in its plentiful supply. Most importantly, the O-H symmetric (v1) and antisymmetric (v3) vibrational stretching fundamentals are at high enough energy so that a four-quantum overtone transition (v1+ 3v3) occurs just at the red edge of the visible spectrum. When comparing the vibrational transitions of gaseous and liquid water, the liquid phase O-H stretching band is red-shifted (to a lower energy) from the gas phase values of v1 and v3 by several hundred wavenumbers. This shift is primarily the result of hydrogen bonding in the liquid. The near-IR absorption bands of ice (solid phase) are the most red-shifted of all. Hydrogen bonding in water causes the stretching frequencies of H2O to shift to lower values. It is believed that if water did not have hydrogen bonds, it would still be colored, perhaps with a more intense blue than actual water.
Other hydrogen-containing liquids and solids besides water, such as liquid ammonia, could possess traces of bluish color because of vibration and rotation effects. However, water and ice are the only two chemical substances occurring in sufficiently large bulk for a weak coloration to be visible.

Why do we not see colors caused by molecular vibrations in many other substances?

Most molecules have vibrational energies that are lower in frequency (longer in wavelength) than that of water, falling in the range of far infrared or thermal vibrations rather than in the visible light range. The hydrogen atoms in water are very light, and the bonds between hydrogen and oxygen very strong, which shifts them to higher frequencies (with shorter wavelengths), with overtones that lie in the range of visible light. Just as the pitch of a vibrating string is raised if the mass of the string is reduced and the tension applied to the string is increased, so too the highest-frequency vibrations occur with the lightest atoms (hydrogen) when most strongly bonded (to oxygen in water).
Vibrational states, as well as the related rotational states, also can modify the energy of the electronic excitations and are involved in the violet color of iodine vapor, the reddish-brown of bromine, and the green of chlorine.
Purple iodine vapor is produced by heating iodine crystals (combined electronic-vibration-rotation color).
The blue green light of natural gas burning on a kitchen burner emitted by an oxygen-rich gas flame as seen on a kitchen range also involves such combination vibrational, rotational, and electronic excitations in the unstable molecules CH and C2.

What color is the Red Sea?

$
0
0

What color is the Red Sea?

Colors from Bacteria
While the thought of wiggling your toes in the azure waters may be appealing, not all seas, oceans, and lakes are blue. Because of energy lost through vibrational effects, bodies of water usually appear blue. Some seas are pale blue while others are an intense, turquoise blue. Thanks to other influences such as cyanobacteria, water is sometimes green, red, or even brown.

Is the Red Sea red?

The Red Sea’s water is predominantly blue. There are a number of theories as to the origins of the name. Some believe it was named by early travelers because of the region’s reddish mineral-rich mountains. It is surrounded by a desiccated and largely barren landscape, and its hot, salty waters contain beautiful coral reefs. It may appear red in places because of reflections of the surrounding landscape, or reds in the coral on the seabed. As one early traveler noted, "In some places it is very green, in others white and yellow, according to the color of the earth or sand at the bottom."
The waters of the Red Sea are blue, though they may appear red due to reflections of the surrounding reddish landscape or reddish coral on its seabed.
Scientist sampling a Trichodesmium bloom. The colors of the slick are sometimes vivid due to the photosynthetic pigments in the algae, including green chlorophyll and purple phycoerythrin.
Today, it is widely accepted that the Red Sea is named for an occasional bloom of the cyanobacteria, Trichodesmium erythraeum algae, which clouds and muddies the usually translucent blue-green waters. These cyanobacteria appear as red and pinkish blankets on the surface of these waters. After blooming, the Trichodesmium erythraeum die, and they turn the sea reddish-brown.
Vast slick of cyanophyte algae visible from space. The algal cells coalesce in strings and clumps. As the cells age, they become buoyant . In calm weather, the cells aggregate into huge slicks. (Australia)

Colors from Cyanobacteria

The relative abundance of phycobilin pigments, the reddish phycoerythrin and the blue phycocyanin, explain the color of cyanobacteria. Microscopically, the blue phycocyanin pigment, the green chlorophyll, and the accessory pigments give rise to blue-green algae. Species of cyanobacteria differ in their ratios of phyocyanin and phycoerythrin.
The appearance of a body of water changes drastically during a "bloom" of cyanobacteria, but the color is also not always due to pigments alone. For example, lakes in the Swiss Alps have been known to be turned blood-red by Oscillatoria rubescens blooms because they have refractive pseudovacuoles (not bounded by a tonoplast membrane) rather than by excessive phycoerythrin. While the Red Sea may have been named for its periodic blooms of Trichodesmium erythraceum, the aquatic disaster, red tide, is not caused by cyanobacteria, but instead by dinoflagellates (Pyrrophyta).
Cyanobacteria such as Hammatoidea, Heterohormogonium, Albrightia, Scytonematopsis, Thalopophila, Myxocarcina and Colteronema give thermal springs and geyser pools beautiful color patterns - from red to purple and the complete visible spectrum of colors between.
In ancient sedimentary rock, the transition to an aerobic atmosphere is marked by a shift in the color of the layers from gray to red. These cyanobacteria obviously marked the planet in a very permanent way. The change in rock colors marks a time about 2.5 billion years ago, at the end of the Archaean Era and the beginning of the Proterozoic Time.
Frequently, terrestrial "blooms" produce a gooey slime that is black in color because virtually all wavelengths of light are absorbed by the combination of chlorophyll and the accessory pigments. A disease of coral heads is caused by a cyanobacterium (Phormidium corallactinium) and is know as "black line disease." The rocks in the supralittoral fringe (splash zone) of many tropical shores are covered with epilithic (Scytonema, Gleocapsa and Pleurocapsa) or impregnated with endolithic (Mastigocoleus) cyanobacteria. This zone is often called the "black" zone because of the color of these cyanobacteria.
The first cyanobacteria (Cyanophyta) appear in fossils about 2.8 billion years old, and created the opportunity for evolution of more complex oxygen-reliant organisms. They have different biochemistry than Archaebacteria and were the first dominant organisms to use oxygenic photosynthesis. Their photosystem splits water and uses its electrons and protons to drive photosynthesis. As a byproduct of this new reaction system, oxygen gas (O2) was produced in abundance for the first time. This was a fundamental change in the Earth’s atmosphere, and its impact was observed in all surface layers. As cyanobacteria increased the levels of oxygen in the atmosphere, the iron in surface sediments was oxidized into red ferric oxide.

Mineral Water

$
0
0
Mineral Water

Tap water Bottled Water Drinking water alternative sources
On the earth there is no such important resource for the human kind as water. Water forms form 50 to 60% in weight of our body and play an active role in all the vital processes of our body: it allows digestion, food elaboration and waste elimination. Every day we drink water or we eat watery food to replenish our metabolic reserve.

But what is the water we drink made of? Can we rely on drinking tap water or it is preferable to buy bottled water? Among the several brand on sale, which one should we choose?

Here and in the related pages you'll find all the answers to these questions.

Which is the composition of the water we drink?

The water formula is H2O, two atoms of hydrogen and one of oxygen, but only distilled water has this structure. Rain water, snow and ice are quite similar to distilled water. Water presents in nature contains, even if in traces, minerals very important for our health: salt and oligoelements dissolved during its way through the soil or its flowing in rocky streams.
If you would like to have further information from health risks from drinking demineralized water, click here.

Mineral salts and oligoelements

Calcium (Ca)
Calcium is one of the most common elements on the earth. It is essential in our body for teeth and bones formation, blood coagulation, right functioning of our nervous system. Calcium ions are contained in almost all spring, drinking water. Health effects caused by hard water, very rich in calcium and magnesium, are unknown. An excess in calcium can alter the water taste or cause scaling problems in pipes and household appliances. If you use a device for the reduction of the content of calcium and magnesium ions dissolved in water (softener), it is important that the calcium content never goes under 60 mg/l. The World Health Organisation recommend a minimum calcium daily intake of about 700 mg. Drinking calcium poor water is considered dangerous for the risk of coronary diseases.

Magnesium (Mg)
Magnesium is, with sodium and calcium, among the cations most commonly found in drinking water. In humans magnesium is important for many metabolic functions and for muscular and nervous activity. The daily recommended intake is 150-500 mg.

Sodium (Na)
Sodium is an element very diffused on earth and in the biosphere, even if in nature it is almost never in its pure form, but mainly in form of salt (NaCl). Our body contains an average of 100 g of sodium which is an important metabolic regulator for nervous and muscular stimulations. The daily sodium chlorine intake is 20 mg. Due to our diet very rich in salt it is recommended to drink water with a sodic content lower than 20 mg/l, particularly for ipertense people and children. The salt consumption in industrialized countries is considered much higher than the recommended levels (about 3.9 g/day on average). Drinking 2 liters of water containing 20 mg/l of sodium you reach 40 mg, that is about the 5% of the total intake. To reduce the daily sodium intake it would be more logical to change your nutrition: i.e. to eat only integral sea salt, more equilibrate and rich in mineral salts at home, and to avoid precooked food, always rich in refined salt.

Chromium (Cr)
Chromium is an important oligoelement for our organism, on condition that certain concentration are not exceeded and the element is not found in toxic or carcinogenic combinations (always due to industrial pollution). At present there is no recommended daily intake.

Copper (Cu)
Copper is an essential element for our health, but it is toxic at high concentration. A daily intake of 1.2 mg is recommended. Copper pollution in water can originate form copper pipes corrosion by soft, acidic water.

Iron (Fe)
Food rich in iron is very important, particularly for children and women in fertile age. The recommended daily intake is 10 mg. Iron is usually contained in low amount in drinking water. The WHO recommend a maximum of 0.3 mg/l the EEC of 0.2 mg/l. Possible increasing (lower than 200 mg/l) are not to be considered harmful, even if they make the water not nice to drink and give an unpleasant reddish colour.

Chlorine (Cl)
Chlorine is an important constituent of organic liquid and a daily intake of 7-15 g of NaCl is recommended.

Manganese (Mn)
Food usually covers the recommended daily intake of 2-3 mg. An excessive concentration in water is not necessarily harmful, but originates the same problems as iron (unpleasant taste and colour).

Selenium (Se)
Even if selenium is considered a toxic element taken is high dosage, it is an important anti-oxidant. Selenium is useful to attack free radicals and then prevent aging. The recommended daily intake by EEC is 40 picog. A possible lack of selenium can increase the risk of tumour and cardiovascular diseases.

Fluorine (F)
In someone opinion fluorine is useful for the good health of bones and teeth, sometimes it is even essential, in others opinion it is unnecessary when you are adult, above all if it is added.
Fluorine is an halogen and it is the most electronegative of all the elements, so it reacts easily with most of the elements. In 1945 the addition of fluorine in drinking water began to be experimented in New York State, followed by Australia and some areas in UK, with the declared purpose of preventing dental caries in population. Water fluorination is prohibited in Belgium, Denmark, the Netherlands and France; in Spain and Germany local authorities handle every decision and in Italy there is no specific law on this matter.
Fluorine values useful for our body are very close to toxic values, so a dispense not aimed and personalized can cause high risk of overdosing and chronicle poisoning, with consequent skeleton deformation, spots on tooth enamel, osteosclerosis, neurological disorders, damages on the thyroids and even tumours. According with some research 10% of fluoride doesn't deposit in teeth and bones, but in organisms such as kidneys. Fluorine has negative effects on the central nervous system, determining behaviour alterations, cognitive deficit, influencing on the foetus development even in concentration not harmful for the mother.
The calcium fluoride presents in nature is very different from the sodium-silica-fluoride (Na2SiF6) added in drinking water, an industrial waste that is toxic and difficult to digest.
People against drinking water fluorination argue that it is a violence that does not count individual choice freedom, not to mention the individual tolerance limit.

Other inorganic toxic substances

Many toxic minerals are contained in water supplies, usually at high levels. Treatment and potabilisation plants work very well reducing these minerals to safe levels. Minerals can enter surface or ground water through natural sources, industrial sewage, leach age from urban or agricultural areas, water pipes walls or even from domestic sources.
The list of organic substances that you can find in industrial applications is long, a brief description of the most common follows.

Phosphates
Phosphate in water originates from detergents and fertilisation and a level higher than 0.1 mg/l indicates pollution. Flora and fauna, very sensitive to phosphate presence, are the main victims.
Sulphates
Sulphates are sulphuric acid salts combined with metallic ions. Water can naturally contains small quantities of sulphates, but they are mostly transferred in water bodies from the atmosphere and in the atmosphere form road traffic, industries and energetic production. Sulphur oxidised in the air can come back on the soil as acid rain, causing serious environmental problems.

Nitrates and nitrites
Nitrates are the main source of nitrogen for plants and an essential constituent for nucleic acids and amino acids.
A nitrates water content of about 10 mg/l is considered normal and natural. Different concentration is due to human operations (mauring, air pollution due to transport). The problems resulting from excessive nitrate presence are due to the toxicity of nitrate for human body: nitrates are transformed in nitrites or in carcinogenic nitrosamines.

Aluminium (Al)
Aluminium is very abundant on the earth, but is not important for human nutrition. Aluminium can have toxic effects even in small quantities. These effects occur in nervous system, but health effects originating from aluminium intake through water are still on debate.
Aluminium concentration is usually lower than 200 mg/l in drinking water. If you drink 1.5 litre of water per day, your daily intake from water is lower than 300 mg/day, a negligible amount if compared with the amount taken by nutrition (10-20 mg/day). There is no evidence that the aluminium assumed through water is more soluble and then more easily digestible, than the aluminium contained in food. Due to all these uncertainties at present there are no rules about its concentration allowed in drinking water. The WHO recommend a concentration lower than 20 mg/l.

Arsenic (As)
Arsenic can be toxic even in low amounts. Nevertheless the arsenic contained in food (amounts ranging from 0.01 to 1.5 mg/kg of dry weight) has a different influence: it carries out some positive metabolic function for our body. Its toxicity is strongly linked on the concentration.

Lead (Pb)
Lead is poisoning even in small amounts for microorganisms, interfering with haemoglobin formation and with the functionality of central nervous system. Lead is particularly harmful for children, who can suffer long term neurological and behavioural disorders. Major lead sources are paint, vehicle emissions, food and water. The European Directive about drinking water for human consumption 98/93/EC states that the maximum allowed lead concentration in drinking water should decrease from the actual 50 mg/l to 10 mg/l within 25 December 2013. The problem in Italy is that many pipes contain lead and acidic soft water, with a low phosphate content. If this water lingers for long time in the pipes it can adsorb lead. Some precautions can be taken to lower lead content in drinking water:

    flush the water before drinking it, since lingering water in pipes tends to accumulate lead; to avoid water dissipation it is recommended to collect the flushed water in bottles and tanks for a following use;

    do not use hot tap water for cooking, since hot water dissolve lead more easily than cold water;

    periodically remove clinker and slag from the pipes;

    to use an home water filter is certainly a good way for lead removal.

Cadmium (Cd)
Cadmium is a highly toxic heavy metal, considered carcinogen. Its harmful action is similar to the effect of lead and it can be released in drinking water by zinced iron pipes. Zinc always contains a small amount of cadmium.

Mercury (Hg)
Mercury can or can not be toxic, depending on its chemical bonds. The WHO recommend a daily intake of 0.3 mg/day for a 60 kg person. Mercury can be released in ground water or in surface water by industrial waste water discharge in rivers and estuaries, by leach age from toxic landfill, by mercury emissions from volcanoes, seismic underground activity, incineration and fossil fuels combustion. The mercury released in the atmosphere is very light, so it can reach long distances from the source and fall again on the soil through rain, entering water bodies.
However mercury is not commonly found as pollutant in our drinking water.

Asbestos
Asbestos can reach drinking water through natural sources, pipes built in a compound made of concrete and asbestos and from atmosphere. Hard water seems to bring to a lower asbestos loss compared to water poor in salts, which is much more corrosive.

Chlorine (Cl)
At present chlorination is the most used treatment to remove water bacteria which could cause health problems. The Italian law allows 30 mg/l of chlorine, while the guidelines of the European Directive indicate 1 mg/l and specify that the concentration should be as low as possible. According with international research the consumption of water containing compounds formed after the reaction between chlorine and microorganisms (trihalometanes) can contribute to the increasing of huro-genital tumours.
If when you open the tap you smell the chlorine odour typical of swimming pools, it is recommended to pour the water in a large tank and to leave it open or semi-open for about half an hour. Chlorine is in fact very volatile and tend to still on the water surface. To accelerate chlorine dispersion you can pour the water from a tank to another repetitively or mix very quickly.

Chemical organic compounds

Chemical organic compounds directly originates from plant or animal matter. For instance plastics are chemical organics compounds made of petrol, which originates from plants and animals.
Nowadays there are more than 100.000 chemical organic compounds, which include synthetic fertilizers, pesticides, biocides, herbicides, paints, dyes, flavours and pharmaceutical substances. Most of these compounds are toxic and many have been found in water reservoirs. VOC (Volatile Organic Compounds) are very dangerous, because they are adsorbed by the skin in contact with the water carrying them. If chlorine used for the water disinfection is in contact with these chemical organic compounds, the carcinogens trihalometanes can form.

Phyto-pharmaceuticals
Phyto-pharmaceutical products are the most accused substances for ground water pollution. We are not going to spend too much time in the description of their use and abuse, but everybody should know cases of closed wells. Even if ground water pollution stopped immediately, impossible thing to happen, it would take a long to soil and water to recover. Not very much is known about the compound of phyto-pharmaceuctics, but metabolites can be much more toxic than water.

Surfactants
Surfactants are the substances used in detergents to lower the surface tension of the water, allowing it to wet the clothes better. We all use substances containing surfactants, which are responsible of the pollution of the water we drink. They are also in cosmetics, anti freezing products, glues, colours. We can contribute to the reduction of this pollution source, using only the minimum necessary quantity or choosing biodegradable surfactants.

Microbiological pollution
Microorganisms include bacteria, virus and parasite.
Bacteria are carefully monitored in public water supplies, since they can be responsible of serious diseases as typhoid, cholera, hepatitis etc. and their presence can be easily detected. Bacteria are easily killed by adding chlorine.
Viruses are very abundant in water supplies as well. They are much more difficult to detect. Most viruses are killed by chlorination, and anyway most of the viruses carried by water are too week to be harmful for humans.
The third group of microorganisms commonly found in water are parasite, as giardia and cryptosporidium. They are very resistant and can be found in tap water even is a treatment system is present.
When drinking water has to be carried along long distances, the problem of a possible pollution occurs. This pollution can happen through the contact of water with porous surfaces or synthetic materials that are an ideal media for microorganisms. A particular type of infection which can be transmitted through water is legionella. The risk occurs particularly in showers or Jacuzzis. The ideal environment for the bacteria of legionella phneumofila is included between 37 and 45 C.

Wind & weather statistics Kakinada

$
0
0

Wind & weather statistics Kakinada 

 https://scontent-b-sin.xx.fbcdn.net/hphotos-xpf1/v/t1.0-9/10384585_624131584377008_8818472396566815688_n.jpg?oh=eb4edf7ace788625964f8d5a3eee06ff&oe=55356509

Statistics based on observations taken between 10/2009 - 12/2014 daily from 7am to 7pm local time. You can order the raw wind and weather data in Excel format from our historical weather data request page.
 
Month of year
Jan
Feb
Mar
Apr
May
Jun
Jul
Aug
Sep
Oct
Nov
Dec
Year
01
02
03
04
05
06
07
08
09
10
11
12
1-12
Dominant Wind dir.
Wind probability
>= 4 Beaufort (%)
0
0
1
0
1
0
2
0
0
5
2
1
2
Average
Wind speed
(kts)
3
3
3
3
3
4
5
4
4
5
4
3
3
Month of yearJanFebMarAprMayJunJulAugSepOctNovDecYear
0102030405060708091011121-12
Dominant Wind dir.












Wind probability
>= 4 Beaufort (%)
0 0 1 0 1 0 2 0 0 5 2 1 2
Average
Wind speed
(kts)
3333345445433
Average air temp. (°C)
27
28
31
33
34
33
30
30
30
30
28
27
30
Wind direction distribution in (%)YearJanuaryFebruaryMarchAprilMayJuneJulyAugustSeptemberOctoberNovemberDecemberYearNNNENEENEEESESESSESSSWSWWSWWWNWNWNNW16051015202530© windfinder.com

Description

This is the wind, wave and weather statistics for Kakinada in Andhra Pradesh, India.

Restriction on production of Neem coated Urea removed

$
0
0
Restriction on production of Neem coated Urea removed

Chemcials and Fertilizers Minister says there would neither be increase in Urea price nor change in subsidy

The Government has taken steps to encourage production and availability of fortified and coated urea in the country. In this regard, the cap / restrictions to produce Neem coated urea has been removed. The Minister of Chemicals and Fertilizers Sh. Ananth Kumar today said that a notification in this regard has been issued. Addressing a press conference here today, he said that using neem coated urea will not only increase crop yields but also lower input cost to farmers. He said it will also reduce imports of precious fertilizers as well as reduce ground and soil pollution.

Shri Ananth Kumar said that presently India is using only 60 lakh mt neem coated urea which can be increased to full demand of 310 lakh MT in the country. He said that neem coated urea is costly by 5% compared to plain prilled urea but it reduces Nitrogen loss by more than 10%, thereby incurring a net savings of Rs. 13.5 per bag for farmers. Due to higher nitrogen use efficiency, the use of nitrogen coated urea can also eliminate import of urea resulting in huge foreign exchange savings. Presently, India is importing about 71 lakh MT urea. He said that, additionally, farmers will also get advantage of better yield, less pest attack due to less use of urea which will also ensure better NPK use ratio and balanced use of fertilizers.

Shri Ananth Kumar informed that there is adequate availability of fertilizers in the country and there is no shortage anywhere. He said that in December 2014, 1706 rakes were used for supply of fertilizers as compared to 1488 in December 2013. He said, in future also, there will be no dearth of urea. The Minister clarified that there would neither be increase in urea price nor change in subsidy.

The Minister also informed that for 3 fertilizers plants, viz., Mangalore fertilizers, Madras fertilizers and SPIC Tuticorin plants which were running on naphtha, the Government has decided to give subsidy on naphtha for next 100 days and these 3 plants will soon restart. He further informed that the issue of Right of Way for laying the gas pipeline from Kochi to Mangaluru has been resolved.

Warming oceans speeding up climate change cycle

$
0
0

Warming oceans speeding up climate change cycle

Scientists have identified another consequence of global warming that is likely to accelerate climate change still further
- See more at: http://www.rtcc.org/2015/01/09/warming-oceans-speeding-up-climate-change-cycle/#sthash.T4i2V8te.dpuf
By Tim Radford

Last updated on 9 January 2015, 12:20 pm
Warming oceans speeding up climate change cycle
Scientists have identified another consequence of global warming that is likely to accelerate climate change still further
(Pic: UNMIT/Martine Perret)
The warming oceans could start to return more carbon dioxide to the atmosphere as the planet warms, according to new research.

And since 70% of the planet is covered by clear blue water, anything that reduces the oceans’ capacity to soak up and sequester carbon could only make climate change more certain and more swift.

It is a process that engineers call “positive feedback”. And under such a cycle of feedback, the world will continue to get even warmer, accelerating the process yet again.

Many such studies are, in essence, computer simulations. But Chris Marsay − a marine biochemist at the UK’s National Oceanography Centre in Southampton − and colleagues based their results on experiments at sea.

Sediment traps

They report in the Proceedings of the National Academy of Sciences that they examined sediment traps in the North Atlantic to work out what happens to organic carbon – the tissue of the living things that exploit photosynthesis, directly or indirectly, to convert carbon dioxide – as it sinks to the depths.

Sooner or later, much of this stuff gets released into the sea water as carbon dioxide. This is sometimes called the ocean’s biological carbon pump. In deep, cold waters, the process is slow. In warmer, shallower waters, it accelerates.

And as there is evidence that the ocean is responding to atmospheric changes in temperature, both at the surface and at depth, the study suggests that “predicted future increases in ocean temperatures will result in reduced CO2 storage by the oceans”.

The research was conducted on a small scale, in a limited stretch of ocean, so the conclusion is still provisional − and, like all good science, will be confirmed by replication. But it is yet another instance of the self-sustaining momentum of global warming.

Report: 2014 “warmest” year since 1891

Such positive feedbacks are already at work in high latitudes. Ice reflects sunlight, and therefore the sun’s heat. So as the Arctic ice sheet steadily diminishes over the decades, more and more blue water is available to absorb heat − and accelerate warming.

The same gradual warming has started to release another greenhouse gas trapped at the ocean’s edge. Natural “marsh gas”, or methane, is stored in huge masses, “frozen” as methane hydrate in cold continental shelves.

Methane exists in much smaller quantities than carbon dioxide, and has a shorter life in the atmosphere, but is far more potent, volume for volume, as a greenhouse gas.

Researchers at the Arctic University of Norway in Tromso reported last month in Geophysical Research Letters that once-frozen methane gas was leaking from thawing ocean floor off Siberia.

Some of this thaw is natural, and perhaps inevitable. But some is connected with human influence and could accelerate.

Alexei Portnov, a geophysicists at the university’s Centre for Arctic Gas Hydrate, Climate and Environment says: “If the temperature of the oceans increases by two degrees, as suggested by some reports, it will accelerate the thawing to the extreme. A warming climate could lead to an explosive gas release from the shallow areas.”

Biological origin

Arctic methane, like ocean organic carbon, has a biological origin. It is released by decaying vegetation under marshy conditions and tends to form as a kind of ice at low temperatures and high pressures, much of it along continental shelves that, at the height of the Ice Ages, were above sea level.

The International Union for Conservation of Nature also reminded the world last month that the ocean plays a vital role in climate, and that plankton, fish and crustaceans could be considered as “mobile carbon units”.

In this sense, the fish in the sea are not just suppers waiting to be caught, but are important parts of the planetary climate system. The healthier the oceans, and the richer they are in living things, the more effective they become at soaking up atmospheric carbon.

“The world is at a crossroads in terms of climate health and climate change,” said Dan Laffoley, vice-chairman of the IUCN World Commission on Protected Areas, introducing a new report on the marine role in the carbon cycle.

“Neglect the ocean and wonder why our actions are not effective, or manage and restore the ocean to boost food security and reduce the impact of climate change. The choice should be an easy one.”

Operation and Maintenance for Water Supply Systems

$
0
0
Operation and Maintenance for Water Supply Systems
1.TERMINOLOGY
Operation of water supply system is timely and daily operation of the components of a water supply system such as headworks, treatment plant, machinery and equipment, transmission mains, service reservoirs and distribution system etc. efficiently and economically to attain the objective of supplying safe and clean water equitably to the consumers.
MAINTENANCE of water supply system is defined as the art of keeping the structures, plants, machinery and equipment and other facilities in an optimum working order and proper functioning without any interruption. There are two types of maintenance viz., Preventive Maintenance and Corrective Maintenance.
PREVENTIVE MAINTENANCE constitutes routine works and precautions to be taken periodically to prevent the system from mal-functioning by mechanical adjustments, repairs, corrective action and planned maintenance.
CORRECTIVE MAINTENANCE involves carrying out works related to break down, which has actually occurred by replacements, correction of defects etc.
Preventive maintenance is more economical than corrective maintenance and it provides uninterrupted service and avoids the need for corrective maintenance.
2 NEED FOR OPERATION AND MAINTENANCE
Poor O&M practices have, on mimy occasions largely contributed to decreased utility or even to an early failure of newly constructed water supply facilities. Thus the health and social benefits for which the facilities were designed and implemented have not been realized, capital investment have been wholly or partially lost and scare resources are expended on the premature replacement of equipment or for the rehabilitation of facilities before they have been in operation for the full span of their useful lives. Hence, proper O&M is absolutely essential for deriving the benefits continuously from the investments made.
3 BASIC REQUIREMENTS OF O&M
Basic requirements of successful O&M of a water supply system include:
Availability of Detailed Completion Plans and Operators’ Manuals: At least five sets of the records of Completion plans of all components, Operators’ Manuals of each machineries and equipment must be made available; one set is kept in the Head office, one set at the site offices and other sets in the sub-offices. All these sets must be corrected and pdated whenever additions or alterations are made to any of the structures and equipment in the water supply systems.
Understanding the Plant: A thorough knowledge of the plant, the processes and functions of each of equipment, operating procedures and schedules of preventive maintenance by the operators as well as the engineer-in-charge of the Water Treatment Plant, pumping station and transmission and distribution system is essential.
Schedules of Operation and Preventive maintenance: A detailed schedule of unit operations and routine preventive maintenance to be carried out daily, weekly, monthly and annually is worked out and a copy of the same is made available with each of the operators. The schedules should also be exhibited on the wall near the equipment. The schedules of unit operations may have to be altered to suit changes in raw water quality, hours of availability of power, breakdowns and up-set conditions etc. The responsibility of the specific preventive maintenance work should be assigned to each of the operators.
Schedule of Inspection of Machinery : A systematic regular schedule of inspection of machinery and equipment, their lubrication and servicing programme must be prepared and provided to the operators. Appropriate supervisory control should be exercised.
Training: The personnel who are already available or chosen to carry out the activities of O&M may have to be trained through special courses or by “on the job training” to ensure that these personnel are thoroughly trained to carry out the actions required in the plan of maintenance. This training is essential from time to time so as to keep them conversant with the latest technological advances in the field and to prevent experimentation by operating personnel to meddle with equipment since often these operating personnel may not be capable to take up the required maintenance. On the job training is preferred to class room lectures. The supervisors can be trained initially and then they can later train their operators.
With proper training the existing operation and maintenance staff can do the operation and maintenance work without any extra expense.
Staff Position: Appropriate charts indicating the operating and supervisory staff actually in position should be maintained at the WTP, pumping stations and at each office for review. The job description of operating personnel shall clearly define the limits up to which these personnel can carry out normal maintenance. The job description of the Supervisor jManager shall include the requirement that they shall ensure that the operating personnel conform to these limits and thus ensure the safety of the equipment.
Records of Equipment and Machinery: For each piece of equipment and machinery records (Log book and History book) should be maintained in which all details of the equipment and activities such as servicing, lubrication, replacement of parts, operating hours on each day and other pertinent data are recorded. The O&M plan programme contains as to what should be done and when. But to decide as to how long the equipment is to be allowed to be kept in service requires information as to when it was installed, what is its normal life etc.
Good history record system shall include the following minimum information to ensure the required maintenance.
•    Name of equipment and it’s location
•    Number available or installed
•    Serial number
•    Type and class
•    Date of procurement/ installation
•    Cost of procurement and installation
•    Name of manufacturer with address and telephone number.
•    Name of distributor/dealer if purchased through them with address   and telephone number.
•    Name of servicing firm with address and telephone number.
•    Major overhauls: Details with date, nature and cost
•    When next overhaul is due.
•    Date, type and cost of repairs and replacement
•    Cost of spares and cost of labour for repairs.
Records of Water Quality: Complete records of physical, chemical and bacteriological analysis of water-samples collected at strategic locations at least twice in a year from source to the consumers’ taps should be maintained and reviewed. Charts could be prepared for important water quality parameters (for example turbidity, Fe residual chlorine etc.) and any changes as compared to standards must be taken note ot for taking corrective measures.
Records of Key activities of O&M: It is advisable to maintain records of certain key activities such as daily and cumulative supply of water over the years, quantity of water treated and the quantity of water supplied.
Overall Supervision and Inspection: Overall supervision and inspection of O&M activities are essential to ensure efficient functioning of all components of the water supply system.
Good Housekeeping: Buildings, other structures and equipment should be maintained in good condition. Exterior of concrete surfaces are colour washed and metallic parts are painted annually. The environment of the WTP and pump houses must be maintained clean, tidy and pleasing, by developing good garden and trees.
Operation and Maintenance Manuals
Preparation of O&M manual consisting of features of O&M of individual components of the water supply system is necessary for adopting in the O&M of the systems. The O&M features of the following components are discussed in the following subsections.

Home of International Migratory Bird Day IMBD 2015

$
0
0

Home of International Migratory Bird DayIMBD 2015

Click Below to Vote...Haga Clic Abajo para Votar

In 2015, International Migratory Bird Day will focus on the importance of habitat to birds. With the beautiful work of artist Amelia Hansen, we are developing the annual poster, education materials, and promotional materials that will be used from Canada to Argentina and the Caribbean. As Amelia completes the paintings, help us select the 2015 poster design by placing your vote!!
Environment for the Americas (EFTA) provides information and education materials about birds, bird conservation, and bird education from Canada to South America. Our programs inspire people of all ages to get outdoors, learn about birds, and take part in their conservation. Bird educators, bird festival organizers, and birders find opportunities to connect ideas, create bird festivals, and offer education close to home or across borders. Known for our signature program, International Migratory Bird Day, we also have programs that connect people year-round. 


International Migratory Bird Day (IMBD), the signature program of EFTA, is the only international education program that highlights and celebrates the migration of nearly 350 species of migratory birds between nesting habitats in North America and non-breeding grounds in Latin America, Mexico, and the Caribbean. Each year IMBD explores a different aspect of migratory birds and their conservation.

INTERNATIONAL MIGRATORY BIRD DAY

What is International Migratory Bird Day (IMBD)?
IMBD celebrates and brings attention to one of the most important and spectacular events in the Americas - bird migration.  Bird Day is celebrated in Canada, the United States, Mexico, Central and South America, and the Caribbean.
When is International Migratory Bird Day??
IMBD officially takes place on the second Saturday in May in the U.S. and Canada and in October in Mexico, Central and South America, and the Caribbean each year. But we recognize that this date doesn't work well for all bird events and bird festival organizers, or for the migratory birds themselves. To the south, migratory birds have left, heading for breeding sites to the north. Farther north, the birds haven't arrived.  We remedied this problem by removing the month and day from our bird education and festival materials, leaving only the year, and reminding groups "everyday is bird day." Now, IMBD is celebrated almost year-round. Most U.S. and Canada events take place in April and May, while fall events are the norm in the Caribbean and Latin America.

Why Celebrate Migratory Birds?
Public awareness and concern are crucial components of migratory bird conservation. Citizens who are enthusiastic about birds, informed about threats, and empowered to become involved in addressing those threats, can make a tremendous contribution to maintaining healthy bird populations. By modeling what can be done and involving people, their interest and involvement in stewardship can grow. One of the most successful vehicles for public education on migratory birds is International Migratory Bird Day(IMBD).  Across the Americas Bird Day events are providing great ways for people to get involved. 

Educational and Promotional Materials
Environment for the Americas develops many educational and promotional materials related to each year’s theme. We invite you to use these materials at any time to support your events and programs. The materials and resources we provide are relevant after the theme year has past.  Consider incorporating materials from the following themes into your programs at any time. Available materials are listed under each theme.

Why Birds Matter

$
0
0

International Migratory Bird Day 2014

Why Birds Matter

The Benefits of Birds to Humans and Nature
Not everyone is aware of the diversity of birds around the world, the amazing migrations some take, and the phenomenal range of behaviors, plumages, and songs they exhibit. International Migratory Bird Day 2014 shares the many ways in which birds matter to the earth, to ecosystems, and of course, to us.

Some bird species provide practical solutions to problems, such as the need for insect and rodent control. Others disperse seeds, helping to revegetate disturbed areas. Others are pollinators, ensuring that we are graced with flowering plants, trees, and shrubs. Beyond the utilitarian, birds are inspirations for the arts.

Amadeus Mozart had a pet starling that motivated the opening theme of the Third Movement of his Piano Concerto No. 17 in G. Beethoven used the songs of thrushes and blackbirds, and many musical pieces contain the call of the cuckoo. Paintings, poetry, and of course the IMBD 2014 hammered steel drum art all express the intangible joy birds provide us every day. Join us in raising awareness of birds and why they matter through International Migratory Bird Day.


Why Birds?


Birds have been used to monitor the environment throughout history. Aristotle, in 342 BC., described how the behavior of cranes (Grus grus) can be used to forecast the weather, while fishermen from the 17th century through today use flocks of seabirds as reliable indicators of healthy fish concentrations.
Birds are one of the best, and in some cases the only, monitors of environmental change. Serving as natural "biomonitors", conservation biologists and ornithologists have used changes in bird populations and communities, and changes in bird behavior and reproductive ability to (1) examine the long-term affects of habitat fragmentation and introduced species, (2) monitor water quality, (3) indicate the health of marine fishery stocks, and (4) identify environmental pollutants such as organochlorines, heavy metals, and radionuclides.
It is clear why we can use birds important indicators of environmental change:
  • Birds are easy to study. Many species are easily identified, detected, and return to traditional breeding sites yearly, so large amounts of data can be reliably gathered from scientists and a concerned public alike. The longest running data gathered on wildlife populations over time comes from Audubon's Christmas Bird Count, providing nearly one hundred years of data on changes in North America's bird populations.

  • Birds are well known organisms. Because the biology, ecology, behavior, and evolutionary histories of many birds have been studied extensively, scientists have a foundation on which to ask the most pertinent questions, base hypotheses, obtain answers, and cultivate solutions. This background knowledge reduces risk of misinterpretation, allowing scientists to use birds, sensitive to stresses in predictable ways, as a proxy measure of environmental change. Furthermore, this background knowledge yields cost-effective research, since studies using other groups of animals often requires several years of basic data gathering before monitoring can begin.

  • Birds integrate and accumulate environmental stresses over time because they are usually high in the food chain and have relatively long life-spans. Thus birds can be used as indicators of unexpected environmental problems, as when declining numbers and breeding success of birds such as the Bald Eagle (Haliaeetus leucocephalus), Osprey (Pandion haliaetus), and Brown Pelican (Pelecanus occidentalis) revealed that DDT was a pollution hazard.

  • Bird populations and communities, and bird behavior and reproductive success often reflect closely the stability of an ecosystem. Thus long-term monitoring programs such as Audubon's Christmas Bird Count, Audubon and the Cornell Lab of Ornithology's joint BirdSource and Project FeederWatch, and the federal Breeding Bird Survey, help reveal declines in population numbers and changes in species' ranges resulting from human-induced causes, providing information crucial to land management decisions.

  • Birds hold widespread public interest. Nearly 60 million birders in North America have made birding the second most popular outdoor activity after gardening, spending billions of dollars annually on birding supplies. Volunteer birders participating in citizen science programs form a powerful resource from which to gather data about population trends over a broad geographical range. In North America, such citizen science programs include the National Audubon Society's WatchList, Christmas Bird Count, Birdathon, and Important Bird Areas; Audubon and the Cornell Lab of Ornithology's joint BirdSource and Project FeederWatch, and the federal Breeding Bird Survey.

Sultanpur National Park, Gurgaon shut down after more than 40 birds found dead

$
0
0
The Sultanpur National Park in Gurgaon district was shut down after more than 40 migratory birds were found dead inside the park on January 10, 2015.
The bird sanctuary located on the Gurgaon-Farrukhnagar Road got shut down for a week as a precautionary measure after a scare of a highly-pathogenic strain of Avian Influenza Virus (H5N1) causing bird flu got spread in the North India.
As per the reports, the dead birds included 36 Eurasian Coot.
Other bird spices that were found dead in the lake were Spot Bill Duck, Common Moor Hen and Jungle Bubbler.
Though the cause of the death of the birds has not been declared yet by the authorities, there are also the reports of the birds having eaten some pesticide-infested crops at a nearby field.
The blood samples of the dead birds have been sent to specialised laboratories to confirm the cause of the death.
The Gurgaon district administration, forest and wildlife department have been placed on high alert after the incident took place.
The health department has also been asked to be alert for any emergencies.
More than 100 ducks were culled at Sukhna Lake in Chandigarh in December 2014 after a duck was found dead in the lake, testing positive for H5N1 (avian virus).
The bird flu scare since then has spread across Haryana after crows were found dead in Pinjore and Jagadhari and 10 migratory bar-headed geese were reported dead in the plains of Jind.
About Sultanpur National Park:
Situated in Gurgaon district of Haryana on Gurgaon-Farrukh Nagar road, Sultanpur National Park is famous for its migratory as well as resident birds.
Migratory species reach the park after covering incredible distance from their homelands in Europe, Siberia and Central Asia. The places usually become inhabitable for these birds due to extreme cold temperature, snow covered ground and frozen lakes.
Migratory birds start arriving in the park in September.
Birds use park as a resting place till the following March-April.
During summer and monsoon months, the park is inhabited by many local bird species.
A total of around 250 bird species have been reported in the park.

Global temperature likely to rise by 4 degree Celsius: World Bank

$
0
0
A new report named 'Turn Down the Heat' released by the World Bank explores the impact of climate change in Latin America and the Caribbean, the Middle East and North Africa, and Eastern Europe and Central Asia.
The highlights of the report are as follows:
The risks worsening climate change poses to lives and livelihoods across three regions, namely, Latin America and the Caribbean, Eastern Europe and Central Asia, and the Middle East and North Africa.
It finds that globally, warming of close to 1.5 degree Celsius above pre-industrial times - up from 0.8 degree Celsius today - is already locked into Earth's atmospheric system by past and predicted greenhouse gas emissions.
Without concerted action to reduce emissions, the planet is on pace for 2 degree Celsius warming by mid-century and 4 degree Celsius or more by the time today's teenagers are in their 80s.
Heat waves in the United States in 2012 and Russia in 2010 will become more common. Melting permafrost will release methane, a powerful greenhouse gas that will drive more warming in a dangerous feedback loop.
A world even 1.5 degree Celsius will mean more severe droughts and global sea level rise, increasing the risk of damage from storm surges and crop loss and raising the cost of adaptation for millions of people.
Everyone will feel the impact, particularly the poor, as weather extremes become more commons and risks to food, water, and energy security increase.
The second report focused on three regions - Africa, South Asia, and South East Asia - and the risks to food security, water security, and low-lying cities exposed to dangerous sea level rise and vulnerability to storms.
In many parts of the world, rising temperatures will reduce the annual build-up of glacier ice and the spring melt water that some 50 million people in the low-land farms and cities rely on.
Heat and drought stress will substantially increase the risk of large-scale forest loss, affecting Amazon ecosystems and biodiversity, as well as the forests' ability to store carbon dioxide.
Rising temperatures also affect food security.

What would happen to the climate if we stopped emitting greenhouse gases today?

$
0
0

What would happen to the climate if we stopped emitting greenhouse gases today?

Earth’s climate is changing rapidly. We know this from billions of observations, documented in thousands of journal papers and texts and summarized every few years by the United Nations' Intergovernmental…
Imagine the smokestacks without the billowing clouds of greenhouse gas pollution. JuergenGER
Earth’s climate is changing rapidly. We know this from billions of observations, documented in thousands of journal papers and texts and summarized every few years by the United Nations' Intergovernmental Panel on Climate Change. The primary cause of that change is the release of carbon dioxide from burning coal, oil and natural gas.
International climate talks in Lima this week are laying the foundation for next year’s UN climate summit in Paris. While negotiations about reducing emissions grind on, how much warming are we already locked into? If we stop emitting greenhouse gases tomorrow, why would the temperature continue to rise?

Basics of carbon and climate

The carbon dioxide that accumulates in the atmosphere insulates the surface of the Earth. It’s like a warming blanket that holds in heat. This energy increases the Earth’s surface average temperature, heats the oceans and melts polar ice. As consequences, sea level rises and weather changes.
Global average temperature has increased. Anomalies are relative to the mean temperature of 1961-1990.Finnish Meteorological Institute and Finnish Ministry of the Environment, Author provided
Click to enlarge
Since 1880, after carbon dioxide emissions took off with the Industrial Revolution, the average global temperature has increased about 1.5F (0.85C). Each of the last three decades has been warmer than the preceding decade, as well as warmer than the entire previous century.
The Arctic is warming much faster than the average global temperature; ice in the Arctic Ocean is melting and the permafrost is thawing. Ice sheets in both the Arctic and Antarctic are melting. Ecosystems on both land and in the sea are changing. The observed changes are coherent and consistent with our theoretical understanding of the Earth’s energy balance and simulations from models that are used to understand past variability and to help us think about the future.
A crack in Antarctica’s Pine Island Glacier.NASA Goddard Space Flight Center, CC BY
Click to enlarge

Slam on the climate brakes

What would happen to the climate if we were to stop emitting carbon dioxide today, right now? Would we return to the climate of our elders? The simple answer is no. Once we release the carbon dioxide stored in the fossil fuels we burn, it accumulates in and moves amongst the atmosphere, the oceans, the land, and the plants and animals of the biosphere. The released carbon dioxide will remain in the atmosphere for thousands of years. Only after many millennia will it return to rocks, for example, through the formation of calcium carbonate – limestone – as marine organisms' shells settle to the bottom of the ocean. But on time spans relevant to humans, once released the carbon dioxide is in our environment essentially forever. It does not go away, unless we, ourselves, remove it.
If we stop emitting today, it’s not the end of the story for global warming. There’s a delay in temperature increase as the climate catches up with all the carbon that’s in the atmosphere. After maybe 40 more years, the climate will stabilize at a temperature higher than what was normal for previous generations.
This decades-long lag between cause and effect is due to the long time it takes to heat the the ocean’s huge mass. The energy that is held at the Earth by the increased carbon dioxide does more than heat the air. It melts ice; it heats the ocean. Compared to air, it’s harder to raise the temperature of water – it takes time, decades. However, once the ocean temperature is elevated, it adds to the warming of the Earth’s surface.
So even if carbon emissions stopped completely right now, as the oceans catch up with the atmosphere, the Earth’s temperature would rise about another 1.1F (0.6C). Scientists refer to this as committed warming. Ice, also responding to increasing heat in the ocean, will continue to melt. There’s already convincing evidence that significant glaciers in the West Antarctic ice sheets are lost. Ice, water, and air – the extra heat held on the Earth by carbon dioxide affects them all. That which has melted will stay melted – and more will melt.
Ecosystems are altered by natural and manmade occurrences. As they recover, it will be in a different climate from that in which they evolved. The climate in which they recover will not be stable; it will be continuing to warm. There will be no new normal, only more change.
Glacial ice loss over Greenland and Antarctica from 2003 to 2010.

Best of the worst case scenarios

In any event, it’s not possible to stop emitting carbon dioxide today, right now. Despite significant advances in renewable energy sources, total demand for energy accelerates and carbon dioxide emissions increase. I teach my students that they need to plan for a world 7F (4C) warmer. A 2011 report from the International Energy Agency states that if we don’t get off our current path, then we’re looking at an Earth 11F (6C) warmer. Our current Earth is just over 1F warmer, and the observed changes are already disturbing.
There are many reasons that we need to essentially eliminate our carbon dioxide emissions. The climate is changing rapidly; if that pace is slowed, the affairs of nature and human beings can adapt more readily. The total amount of change, including sea-level rise, can be limited. The further we get away from the climate that we have known, the more unreliable the guidance from our models and the less likely we will be able to prepare. The warmer the planet gets, the more likely reservoirs of carbon dioxide and methane, another greenhouse gas that warms the planet, will be released from storage in the frozen Arctic permafrost – further adding to the problem.

Research to save environment needed: Indian Science Congress

$
0
0

Research to save environment needed: Indian Science Congress


Taking potshots at corrupt politicians, Prof U.C. Mishra, director of the Health, Safety and Environment Group, BARC, said that one of the problems facing researchers in India was that politicians used research to make money for themselves which resulted in the research remaining only on paper.
Prof Mishra was delivering a lecture at the symposium on “Research Needs in the Field of Environmental Sciences” at the ongoing 102nd Indian Science Congress (ISC) at Mumbai University’s Kalina campus on Wednesday.
Stressing on the need for Indian scientists to compete with their Chinese counterparts in helping realize “Make in India”, Prof Mishra said, “In India, we are making more use of the research done by Chinese scientists in our daily life, which includes appliances that could pose a threat to lives. If the ‘Make in India’ vision is to be achieved, Indian scientists will have to come up with innovations that can better the innovations by Chinese scientists.”
Pointing at the need to improve the quality of goods being manufactured in India, Prof Mishra said if that was done, Indian scientists could progress faster than what China had managed to do so far.
Referring to the ongoing “Clean India” campaign, Prof Mishra said that some political leaders were taking up the broom just to portray themselves to be a part of the campaign. He said that the campaign would not be successful in such a scenario and all stakeholders needed to take it up seriously as a responsibility. He criticized the fact that though the government had made numerous laws for safeguarding the environment, they were of no use as they were not being implemented.
Another speaker R.N. Singh, former director, CSIR-NEERI, said that there was an urgent need to conduct research for the safety of the environment. “The environment is suffering irreparable damage as there is no safe way of disposing off poisonous waste material. Researchers should come up with technologies that will protect the environment,” said Mr Singh.



Top 14 Places To Visit In Uttar Pradesh

$
0
0

Top 14 Places To Visit In Uttar Pradesh

Uttar Pradesh, which is referred to as the ‘Heartland of India’, boasts of a rich cultural heritage. The land offers feast to minds that love to explore – be it nature or history. It is not only gifted by nature but it is also home to some of the best man-made monuments. You need not command much of a geographical knowledge to recall that the majestic rivers Ganges and Yamuna flow through this state. Neither is the need to strain your history brain to remember Taj Mahal and Fatehpur Sikri when Uttar Pradesh is mentioned. The state has more to offer. Here are the top 14 places to visit in Uttar Pradesh.

1. Agra

agra

It might sound odd that Agra overtakes Lucknow, the capital of Uttar Pradesh. It is no wonder, considering the fact that Agra is home to the world famous Taj Mahal. This ancient city has wonderful monuments making you awestruck by the sheer brilliance behind the construction. Here are some top attractions for you to visit in Agra.
  • Taj Mahal
  • Agra Fort
  • Itmad-Ud-Daula
  • Fatehpur Sikri
  • Wildlife SOS
  • Sikandara
  • Aram Bagh
  • Khas Mahal
  • Panch Mahal
  • Musamman Burj
  • Jama Masjid
  • Agra Art Gallery
  • Mehtab Bagh
Image Credits @ Joseph R

2. Lucknow

lucknow
The capital of Uttar Pradesh and famously referred to as ‘The city of Nawabs’, Lucknow retains its ancient charm with such authority that you will find yourself in a different world. It was the capital of Nawabs of Awadh. The city enjoyed the generosity of the Nawabs and hence flourished in music, literature, arts and crafts. Given below are some of the important attractions in Lucknow.
  • Bara Imambara
  • British Residency
  • Chhota Imambara
  • Lucknow Zoo
  • Dr. Ambedkar Park
  • Hazratganj
  • Constantia House
  • Lucknow Museum
  • Rumi Darwaza
  • Chattar Manzil
  • Begum Hazrat Mahal Park
Image Credits @ A_Sarkar

3. Varanasi

varanasi
‘The Religious Capital of India’ as Varanasi is called, is frequented by pilgrims from various parts of the world. Considered one amongst the seven holy spots for those who follow Hinduism, the land attracts those who belong to other faiths too. It lies on the banks of the river Ganges, which adds magic to the atmosphere. Given below are the top tourist spots in Varanasi.
  • River Ganges
  • Kashi Vishwanath Temple
  • Sarnath
  • Manikarnika Ghat
  • Archaeological Museum
  • Man Mandir Ghat
  • Chaumsathi Ghat
  • Ramnagar Fort
  • Chunar Fort
  • Banaras Ghats
Image Credits @ Azli Jamil Photography

4. Allahabad

allahabad
For those who follow Hinduism, Allahabad is an important pilgrim center as Lord Brahma, the creator according to Hinduism, landed at this place on earth. The city is located at the confluence of three rivers namely Ganges, Yamuna and Saraswathi. This ancient city, also called as Prayag, witnesses one of the largest gatherings of religious nature during Kumbh Mela once every 12 years. Here are the top attractions in Ahmedabad.
  • Triveni Sangam
  • Khusro Bagh
  • Allahabad Museum
  • Allahabad Fort
  • Patalpuri Temple And Akshaya Vat
  • Jawahar Planetarium
  • Anand Bhavan
Image Credits @ NChandra81

5. Kanpur

kanpur
On the banks of the River Ganges lies Kanpur, the biggest city in the state of Uttar Pradesh. It was earlier called Manchester of the country. Being a major industrial center, Kanpur is now referred to as the commercial capital of Uttar Pradesh. Some of the important tourist attractions in Kanpur include:
  • Bithoor
  • Jajmau
  • Boodha Bargad
  • Kanpur Gardens
  • Shri Radhakrishna Temple
  • Jain Glass Temple
  • Mecca Masjid
  • Allen Forest Zoo
  • Agricultural Gardens
Image Credits @ pranay patil

6. Mathura

Mathura
Mathura is considered the birthplace of Lord Krishna and hence it is one amongst the seven sacred cities for followers of Hinduism. This ancient town has a number of temples belonging to various ages. It was earlier a Buddhist center and was home to 20 monasteries before Hinduism rose to prominence. Some of the tourist attractions of Mathura include:
  • Krishna Janma Bhoomi Mandir
  • Jama Masjid
  • Dwarkadhish Temple
  • Kusum Sarovar
  • Radha Kund
  • Kans Qila
  • Mathura Museum
  • Raja Bharatpuras Palace
  • Govardhan Hill
Image Credits @ Jitendra Singh

7. Fatehpur Sikri

fatehpur-sikri
Fatehpur Sikri, the 16th century city, was built by the renowned Mughal emperor Akbar. Though the city was at its glorious height only for a short period owing to scarcity of water, its breathtaking architecture makes the city eternally famous. The palaces found here reflect the architectural brilliance of the bygone era. Here are some top spots that need to be visited on your tour to Fatehpur Sikri.
  • Panch Mahal
  • Diwan-i-Khas
  • Buland Darwaza
  • Johbhai Palace
  • Lotus Throne
  • Khwabgah
Image Credits @ cpcmollet

8. Ayodhya

ayodhya
Ayodhya, the ancient city, is amongst the sacred cities for followers of Hinduism, as it is believed to be the birthplace of Lord Rama. It is also a place of religious significance for followers of Islam as the place was home to Babri Masjid belonging to the 16th century. Given below are some of the important attractions in Ayodhya.
  • Moti Mahal
  • Kanak Bhawan
  • Hanuman Garhi
  • Ramkot
  • Treta Ke Thakur
  • Mausoleum of Bahu Begum
  • Gulab Bari
  • Guptar Ghat
  • Faizabad Museum
Image Credits @ ramnath bhat

9. Vrindavan

vrindavan
Vrindavan is an important destination for pilgrims belonging to Hinduism, as it is associated with Lord Krishna. Most of the temples found here are ancient. Located near Mathura, these two cities are considered twin holy cities. Given below are some of the leading tourist destinations in Vrindavan.
  • Yamuna River
  • Govind Dev Temple
  • Iskcon Temple
  • Kesi Ghat
  • Bankey Bihari Temple
  • Shahji Temple
  • Rangaji Temple
Image Credits @ ShobhaVKamath

10. Jhansi

jhansi
Well-known cities and the lesser-known cities of Uttar Pradesh have a blend of religion, history, natural beauties and architectural excellence and hence you may not be surprised to note that Jhansi has its share in the common trait of the land. This historic city is situated on Pahujor Pushpavati riverbanks. Given below are some of the tourist attractions in Jhansi.
  • Jhansi Fort
  • Rani Mahal
  • Government Museum
  • Chirgaon
  • Maharaja Gangadhar Rao Ki Chatri
  • Parichha
Image Credits @ byronic501

11. Kushinagar

kushinagar
Kushinagar is a popular Buddhist pilgrim center. This ancient city gains more importance, as this was where Lord Buddha made his last sermon. The historic significance of the place can be gauged by the archaeological evidences unearthed from here. The place finds a place in Hieun Tsang’s travelogues as well. Here are the top attractions of Kushinagar.
  • Sun Temple
  • Mahaparinirvana Temple
  • Kushinagar Museum
  • Ramabhar Stupa
  • Chinese Temple
  • Wat Thai Temple
  • Pawanagar
Image Credits @ marc

12. Sarnath

sarnath
Sarnath is yet another important pilgrim center for followers of Buddhism as it was here Buddha gave his first sermon. The place is sacred for Jains as well. Excavations conducted here reveal how this ancient city flourished in the past. Some of the leading attractions in Sarnath include:
  • Chaukhandi Stupa
  • Sarnath Museum
  • Deer Park
  • Thai Temple
  • Mulagandha Kuti Vihar
  • Dhammek Stupa
  • Tibetan Temple

13. Meerut

Meerut
Meerut is an ancient city and many of its historical buildings date back to the era of the Indus Valley Civilization. Like most cities in Uttar Pradesh the city was constantly ailed by vicious attacks by various invading armies and many of its structures being demolished. Meerut saw its rise under the rule of the Mughals and was a prominent site during the 1857 revolt. The place is considered to be an important historical town and has plenty of monuments and memorials that can be visited. Image Credits amitk227

14. Aligarh

Aligarh
Known for its famous ‘Locks’, the city of Aligarh is a historical city in Uttar Pradesh. The city is famous for being the ground for the famous battle of Aligarh which involved the British takeover of the Aligarh fort from the Maratha Confederacy. The city’s famous Aligarh fort is thus a must visit. The city is also famous for the various tombs of the Muslim saints. The Aligarh Muslim University is a famous college established in 1875-78. There are also various marketplaces in this city and should definitely be visited. Image Credits 
With one visit to Uttar Pradesh, you cannot expect to take in all that is offered by the land. All tourist places in Uttar Pradesh are amazing; be it its rich cultural heritage, ancient temples, extravagant palaces, monuments or just anything here. It is also not possible to attempt to cover all the important destinations here. I would be glad to hear from you about the sites I have not included here.

Top 15 Places to Visit in Andhra Pradesh

$
0
0

Top 15 Places to Visit in Andhra Pradesh

Situated in the southeastern coast of India, Andhra Pradesh is the 4th largest State of India. The capital of the state was Hyderabad which is also the largest city here. However, due to the announcement of the recently formed Telangana State, Hyderabad will be a part and capital of Telangana from the 2nd of June 2014. The State of Hyderabad will continue to function as the State Capital of Andhra Pradesh for a period not exceeding 10 years till a new capital is determined. The state of Andhra Pradesh is mentioned since 800 BC in the Sanskrit Epics like Aitareya Brahmana and Mahabharata. The native language ‘Telugu’ is often associated with the Early Cholas. Andhra Pradesh also came under the rule of the Maurya Empire, the Ikshvaku Dynasty, Pallava, Rashtrakutas, Chalukyas and Later Cholas.When it comes to geography, Andhra covers most of the eastern part of the Deccan plateau and the eastern plains of the Eastern Ghats. The Eastern Ghats being a mineral rich area is covered with thick vegetation and the two regions are connected by patch of sparse vegetation. The State of Andhra Pradesh is well promoted by their tourism department and is well known for its rich natural resources, temples and rivers. The state of Andhra also shares a part of the coastal areas of the Bay of Bengal. The rich cultural heritage, ancient architecture and historical importance have made Andhra Pradesh one of the top tourist destinations in India. We shall discuss in brief the top 15 places to visit in the State of Andhra Pradesh.

1. Visakhapatnam

Vishakhapatnam
Visakhapatnam was the second largest city in Andhra Pradesh and a major sea port of India. However, with the recently announced Telangana State, Vishakhapatnam will now be the largest city of Andhra Pradesh and a probable Capital of the future state of Andhra Pradesh. The climate is tropical and humidity is high throughout the year. The city has all the necessary attractions and resources to make it one of the top tourist destinations in India. Its various beaches, hilltops and a wildlife sanctuary attract a major tourist crowd. The place is the major port of the Indian National Army and is the deepest ports of India. There are various valleys like the Araku Valley, which is a picturesque location for picnics and is a hill station that has some really great trekking hotspots. The various beaches like Yarada and Rishikonda are situated in some of most picturesque locations and are relatively clean and are frequented by many tourists.Given below are the major tourist attractions of Visakhapatnam:
  • Borra Caves
  • Araku Valley
  • Yarada Beach
  • Rishikonda Beach
  • Katiki Waterfalls
  • Indira Gandhi Zoological Park
  • Kailasagiri Hill Park
  • VUDA Park
Image Credits Anindya Roy Photography

2. Tirupati

Tirupati
Tirupati is one of the Major cultural and religious pilgrimage spots in India. The city is located at the southern part of Andhra Pradesh and is situated at the foothills of the Eastern Ghats in the Chittor district. Although the major language spoken here is Telugu, the word Tirupati is a Tamil word as saint Ramanujacharya who was a Tamil Vaishnava saint was responsible for founding this city. The town is famous for its temple dedicated to ‘Balaji’, a form of Lord Vishnu. The temples foundation history is unknown and it was expanded over the centuries by various kingdoms and dynasties including the Chola, Pallava and the Vijaynagar Empire. The temple is one of the major pilgrimage spots in India and especially in the southern India. Apart from the temples, there are various other attractions like parks and zoos. Here are some of the major tourist attractions of Tirupati:
  • Sri Venkateswara Temple
  • Talakona Waterfalls
  • TTD Gardens
  • Deer Park
  • Sri Vari Museum
  • Sri Govindarajaswami Temple
  • Srikalahasti
  • Kanipakam
Image Credits Stephen Keller

3. Vijayawada

Vijaywada
Vijayawada, being the third largest city of Andhra Prades is number 3 on this list. The city is an agriculturally rich state and has been recognized as the Global city of the future by McKinsey. The former name of the city was Bezawada and has been under the rule of various ancient kingdoms of the South and has been one of the places the Chinese pilgrim Hieun Tsang stayed at. The River Krishna runs through the city and is located at the hills of the Eastern Ghats. The city’s location is unique as well as to its west lays the deep jungles of the Kondapalli Reserve Forests which is known to house leopards, jackals, wolves, wild boar and wild dogs. The city itself is a cultural and religious center with its various temples, religious monuments, rivers, ancient caves and many more. Do not forget to buy the famous Kondapalli Toys as souvenirs. Some popular tourist places in Vijayawada are:
  • Undavalli Caves
  • Mogalarajapuram Caves
  • Prakasam Barrage
  • Bhavani Island
  • Victoria Museum
  • Kondapalli Fort
  • Kolleru Lake
  • Gandhi Hill
Image Credits Ashtash

4. Nellore

Nellore
The name ‘Nellore’ literally means ‘Paddy Place’ and is thus one of the primary agricultural cities in Andhra Pradesh. The vast paddy fields of Damaramadugu are one of the prime sources of rice in the state and in the country. The town is split in two by the Pennar River and is thus located at both the banks of the river. Towards the east of the city is the Bay of Bengal and thus Nellore is at a unique and strategic geographical location. The city has seen various ancient dynasties like the Mauryas, Chola, Pallava and Vijaynagar etc. Nellore is also famous for its ancient temples which are amazing owing to their stunning architecture and the cultural history associated with them. Nellore also has the Nelapattu bird sanctuary which is a great spot for the photography enthusiasts and professionals alike. The various lakes, temples, forts in the ancient agricultural town of Nellore are sure to keep you enchanted. Here are some important tourist destinations in Nellore:
  • Udayagiri Fort
  • Venkatagiri Fort
  • Nellapattu Bird Sanctuary
  • Sri Ranganathaswamy Temple
  • Penchalakona
  • Jonnawada
  • Mypad Beach
  • Pulicat Lake
Image Credits Vishnu Vardhan

5. Chittoor

Chittor
The city of Chittoor lies at the banks of the Ponnai River and is thus an important agricultural town in Andhra Pradesh. The town’s major source of economy is its crops and agricultural products like grain, sugarcane, mango and Peanuts. The town has a unique climate which is high in the Eastern areas and low in the western areas because of the change in the altitude. The place is considered to be a backward district as far as the economy is concerned; nevertheless it is a great place to visit and an undiscovered gem for a tourist. The town with its various hills, rivers, temples, forts and a rich collection of flora and fauna is a must visit. A personal recommendation would be to spend more time at the western areas near the Horsley Hills and simply relax. While most attractions in Chittoor can be covered in a day, it is more of a place to relax and rejuvenate. Some major tourist places in Chittoor are given below:
  • Horsley Hills
  • Kaundinya Wildlife Sanctuary
  • Kalavagunta
  • Gurramkonda Fort
  • Nagari Hills
  • Sri Venkateswara Temple
  • Mogili
  • Ramagiri
Image Credits lkikon_18

6. Anantapur

Anantapur
The Largest of all the districts in Andhra Pradesh, Anantapur is famous for diamond mining and agricultural produce like rice, cotton, maize, chillies etc. The town is located near the bordering State of Karnataka and has 6 rivers that flow through the district. The town is an undiscovered tourist location with a number of monuments that exemplify the ancient reign of the Vijaynagar Kingdom and is famous for its ancient temples as well. The old ruins of the hilltop forts, its hidden waterfalls make it an amazing tourist attraction. The town of Anantapur is also famous for housing the mighty banyan tree of ‘Thimmamma Marrimanu’ which is one of the largest trees in the world. Its branches are spread in an area covering around 2.5 acres and a canopy that is spread around 19,107 sq meters. Anantapur is a definitive visit for all people visiting Andhra Pradesh. Given below are major places to visit in Anantpur:
  • Penukonda
  • Ravadurg Gooty Fort
  • Thimmamma Marrimanu
  • Dharmavaram
  • Hemavathi
  • Aluru Kona
  • Lepakshi
  • Raidurga Fort
Image Credits Pushkar V

7. Kurnool

kurnool
Kurnool is known for being the erstwhile capital of the State of Andhra Pradesh. The town is one of the oldest cities and based on the rock paintings of Ketavaram, the town has seen humans since the Paleolithic era. The ancient caves and fort ruins in Kurnool date back pretty far in history and are a marvel to behold. The town is surrounded by the parallel running mountain ranges from north to south. The various temples and pilgrimage sites in this ancient town are not only significant when it comes to their cultural history but are also important architectural heritage of the city. The Rollapadu Bird Sanctuary is one of the prime reasons one must visit this town as it is a great place for both nature lovers and the shutterbugs. Some major attractions of Kurnool are given below:
  • Kurnool Fort
  • Belum Caves
  • Nallamala Forest
  • Rollapadu Bird Sanctuary
  • Adoni Fort
  • Mahanandi
  • Kurnool Museum
  • Mantralayam
Image Credits Lovell D’souza

8. Kadapa

Kadapa
Kadapa literally means a “Gateway”. This name owes to its special location which acts as a gateway to the pilgrim spot of the Tirumala Hills. The town was a part of the various ancient kingdoms of the South and it’s famous for its various temples and forts that exemplify a marvelous Dravidian style architecture and prowess of the artisans when it comes to stone carving. The Bellum Caves are few of the longest caves in the Indian subcontinent and a spot that one shouldn’t miss. The town got its economic boom when the large deposits of natural Uranium were discovered here and is one of the world’s top 20 reserves of the nuclear fuel. The Shree venkateshwara wildlife sanctuary located here is also a great spot worth visiting and is rich with flora, fauna and some breathtaking views. Major tourist places in Kadapa include:
  • Belum Caves
  • Gandikota Fort
  • Sidhout Fort
  • Bhagvan Mahavir Government Museum
  • Sri Venkateswara Wildlife Sanctuary
  • Pushpagiri
  • Ontimitta
  • Ameen Peer Dargah
Image Credits sandeepsajjala

9. Srikalahasti

Skriakalahasti
Located on the banks of the Swarnamukhi River, Srikalahasti is located near the pilgrim city of Tirupati. The name of the town comes from the native names of three animals (spider, snake and elephant) which are said to have received salvation owing to their worship of Lord Shiva. Many different spots of this sacred town have been mentioned in the ancient texts and epics like Mahabharata. The town being a holy spot for the Hindu pilgrims boasts of its various temples which are architectural marvels and are located in few of the most picturesque locations between the surrounding hillocks. The town’s major sources of economy are agriculture and tourism so the visitors can expect good food and hospitality. Here are some major tourist places to visit in Srikalahasti:
  • Sri Kalahasti Temple
  • Talakona Waterfalls
  • Veyilingala Kona Waterfalls
  • Ubbalamadugu Falls
  • Gudimallam
  • Sahasra Linga Temple
  • Bharadwaja Tirtham
  • Durgambika Temple
Image Credits Anulal’s Photos

10. Ongole

ongole
Ongole is an ancient town that came under the reign of the ancient southern Indian kingdoms like Mauryas and Sathavahanas and the Pallava Ruler Krishna Deva Raya. Due to this ancient history behind the town’s origin, it is famous for its Hindu temples which date back to the 17th century. The town’s major produce is tobacco and is famous for its various small scale industries. Ongole is famous for its small beaches which are often devoid of huge crowds and has various water sport facilities. The sands are grainy and golden and the waters are clean. The hidden waterfalls of Bhairavakona are also not to be missed and you’re sure to get lost in the breathtaking and relaxing surroundings. Here are the major tourist attractions of Ongole:
  • Kothapatnam Beach
  • Vodarevu Beach
  • Chennakesava Swamy Temple
  • Kashi Visweswara Swamy Temple
  • Sri Shirdi Sai Baba Mandir
  • Tangutur
  • Chandavaram
  • Bhairavakona
Image Credits pramodmamidi2

11. Puttaparthi

Puttaparti
The significance of Puttaparthi rose to fame due to it being one of the major religious centers of ‘Satya Sai Baba’. The various temples and sociocultural centers in the town attracted a majority of the tourist population and pilgrims. The town houses a no. of religious sites and temples popularized by Satya Sai. The Chitravathi River is also referred as being the new Ganges and was used a cleansing spot for the pilgrims who visit here. One of the most distinctive places to visit here would be the Chaitanya Jyoti Museum which is a modern architectural marvel. The museum combines a mix of Chinese, Thai, Japanese and Gothic style architecture into a single monument. The Satya Sai Space Theater and planetarium is also worth visiting. Here are some major places to visit in Puttaparthi:
  • Sai Kulwant Hall
  • Chaitanya Jyoti Museum
  • Sri Sathya Sai Space Theatre
  • Sri Sathya Sai Hill View Stadium
  • Gopuram
  • Anjaneya Hanuman Swamy Temple
  • Village Mosque
  • Chitravathi River
Image Credits Sahana K

12. Rajahmundry

Rajahmundry
The city is known to be the cultural capital of Andhra Pradesh and is notable for its ancient Vedic culture. The city was said to have been founded by the Chalukyas in the 11th century. However it has been disputed by many historians and archeologists who claim that the town existed before the rule of the Chalukyas. Rajahmundry is also known to be the birth place of the Telugu language. The river Godavari is the major attraction in this town and various parks and ghats are located by its banks. The boat cruises on the river are also an activity that shouldn’t be missed. The town being an ancient one is also famous for its ancient Dravidian Hindu temples that are frequented by tourists from all around. Some of the most popular places in Rajahmundry is given below:
  • Papi Hills
  • Kadiyapulanka
  • Godavari Boat Travels
  • Kotilingeswara Temple
  • Rallabandi Subbarao Government Museum
  • Pattiseema
  • Markandeya Temple
  • Dowleswaram Barrage
Image Credits The World and my Camera

13. Secunderabad

Secunderabad
The town is famous for bearing the nickname ‘The twin city of Hyderabad’. Secunderabad was founded in 1806 AD as a British cantonment; the city differs in major ways from the city of Hyderabad. The town developed under the direct rule of the British as opposed to the Nizam ruled princely state of Hyderabad. Secunderabad is also one of the largest cantonment areas of India. The town is distinct from the other places in Andhra Pradesh due to the majority of its population being Anglo-Indian and Parsis. The town’s various forts and the famous hussain sagar lake are a must visit. Here are the main places to visit in Secunderabad:
  • Golconda Fort
  • Hussain Sagar Lake
  • Konaseema
  • Birla Mandir
  • Trimulgherry Fort
  • Birla Planetarium
  • Saidanimba Tomb
  • All Saints’ Church
Image Credits aupeter100

14. Amalapuram

Ampalapuram
A small town which is mainly known for its agricultural produce of coconuts and rice, Amalapuram has a rich Vedic culture and is known for its various temples. While there isn’t much to see in this town the main places to visit are the Appanapalli Temple, Ainavilli Siddhi Vinayaka Temple and Sree Veereswara Swamy Temple. The town also lies at the head of the Konaseema Delta which is formed by the Godavari River. The town is also a hub of financial and education institutes in the Konaseema region. Major tourist attractions in Amalapuram include:
  • Appanapalli Temple
  • Ainavilli Siddhi Vinayaka Temple
  • Sree Veereswara Swamy Temple, Muramulla
Image Credits apasar

15. Srikakulam

Srikakulam
The town of Srikakulam is located at the banks of the Krishna River and is placed on the northeast corner of Andhra Pradesh. This town came under the kalinga region of ancient India and is known for its various ancient temples. The town has one of the longest coastlines in the state of Andhra Pradesh and its various beaches are also worth visiting. Srikakulam is also a major producer of Khadi products. The various historic temples, monuments and beaches are deserving of a definitive visit. Image Credits SaurabhChatterjee
Being a part of the ancient kingdoms of the southern India, Andhra Pradesh is one of the major sources of Dravidian culture and history. With numerous tourist places in Andhra Pradesh, vast natural resources, varied climatic conditions and numerous ancient temples is a great location which will definitely make you look into the history books.

Top 10 Places To Visit In Maharashtra

$
0
0

Top 10 Places To Visit In Maharashtra

The Land of the Marathas, Maharashtra is the 2nd most populated and the 3rd largest state in India. The state is bordered by the Arabian Sea and the primary language spoken here is Marathi. Being in the western region of India, Maharashtra has been blessed with an abundant supply of natural resources and the significance of the region has been mentioned in the ancient texts. The state of Maharashtra has a unique location of being situated between the Arabian Sea and the Western Ghats. This makes the state a biodiverse region rich in flora and fauna. The Krishna, Godavari, Bhima etc. are the rivers that run through Maharashtra. The state is also the richest state in India and contributes 13.3% of the country’s GDP and 15% of the country’s Industrial output. It is thus a major state in India which has tons of places and attractions a tourist must explore.

1. Mumbai

Mumbai
Formerly known as ‘Bombay’, Mumbai is the largest city and the capital of Maharashtra. It is also the most populated city in India and the 5th most populous city in the world. The city that we see today is a collection of 7 islands which were joined into a single metropolitan through land reclamation techniques in the 18th century under the rule of the British East India Company. The city is often nicknamed the Manhattan of India and is home to the famous Indian film industry or ‘Bollywood’. You might need more than a week to explore all the attractions in this city alone, with a huge number of historical monuments, beaches etc. Image Credits Bru Mac

2. Aurangabad

Aurangabad
Aurangabad is named after the Mughal emperor Aurangzeb and is one of the most prominent tourist places in Maharashtra. The city is famous for its historical monuments and the ancient caves of Ajanta and Ellora which are a national heritage site. The culture of this town is heavily influenced by the Mughal and the Muslim culture of Hyderabad and Marathi and Urdu are the main languages spoken here. The city has various lakes and the special cuisines in this region of Maharashtra are mouth watering. Image Credits arupdutta

3. Kolhapur

Kolhapur
The city of Kolhapur is located at the banks of the Panchganga River and one of the Princely states of the Marathas. The city is considered to be the heart of the Maratha Empire and is famous for its various historical monuments and cultural heritage of the Marathi people. The climate is pleasant all year round with heavy rainfalls during the monsoons. The best time to visit the city is during any of the major Hindu festivals like Holi, Diwali, Ganesh Chaturthi, Vijaya Dashami and Navaratri. The special ‘kolhapuri slippers’ and the kolhapuri cuisines are worth trying out. Image Credits ramnath bhat

4. Mahabaleshwar

Mahabaleshwar
Mahabaleshwar is a hill station in Maharashtra and is located at the Western Ghats. The average elevation of the place is approximately 1,353 meters above sea level and is the source of the Krishna River. The water originates from a spout which is shaped like the mouth of a cow and is situated at an ancient temple of Lord Shiva. The city is a famous summer retreat for the people in Mumbai and is famous for its lakes and trekking hotspots. Image Credits Indianature sw4

5. Solapur

Solapur
Solapur is located on the Karnataka state border and the main languages spoken here are Marathi and Kannada. The city is located at the Deccan plateau and enjoys a moderate and dry climate most of the year. The ancient temples and lakes are also a great place to visit in Solapur. The Siddeshwar Temple is an ancient temple built in the 16th century and is visited by an average of 35 lakh pilgrims in a year. Image Credits JoVivek

6. Matheran

Matheran
Another great hill station located at the Western Ghats in the state of Maharashtra, Matheran is located at an elevation of approximately 800 meters above sea level. The city is famous for its cool and less humid climate and is a popular summer retreat for the population of Maharashtra. The British influence on the architecture is pretty evident and is well preserved by the officials. The train ride to Matheran is of special mention as it is a slow ride that will give you ample time to experience the intoxicating surroundings. Image Credits Neil Dan Fernandes

7. Alibag

Alibag
Alibag was developed under the Naval Chief of the Maratha Ruler Shivaji. It is a coastal town and is famous for its white sandy beaches which are often unpopulated and cleaner than Mumbai beaches. The attractions can be covered in a day or two and there are plenty of cheap and hospitable lodging facilities. The various temples are also worth visiting as they display a brilliant Hindu Maratha architecture. Image Credits DanB.

8. Khandala

Khandala
Located on the Western Ghats, Khandala is located between the Deccan Plateau and the Konkan region of Maharashtra. The city is easily accessible and is a popular hiking getaway near Mumbai. The various trekking locations and viewpoints allow some magnificent views of the entire valley and the Western Ghats. The ancient rock cut caves of Karla and Bhaja are also a must visit along with the Bhushi Lake. The rock formations and cliffs in Khandala have been famous since ages and it is a popular weekend retreat for the people of Mumbai and Maharashtra. Image Credits Somesh Kumar

9. Nashik

Nashik
Nashik is located in the North-Western region of Maharashtra and is located on the banks of the river Godavari which also originates here. The place is mentioned several times in Hindu Mythology and has been famous for being one of the cities that host the Kumbha Mela of India once every 12 years. The town has a huge number of tourist attractions including museums, gardens and a huge array of ancient Temples which are sacred and have been regarded highly important in the Hindu mythology. The city boasts of its authentic Marathi cuisines which must be tried. Image Credits iamrawat

10. Ratnagiri

Ratnagiri
Ratnagiri is a sea port located near the Arabian Sea in the State of Maharashtra. The town has been mentioned prominently in the Hindu mythology and is famous for its Temples. The place contains several different breathtaking natural phenomena like the Rajapur Ganga which is a collection of 14 pools of water which appear almost once in every 3 years. The old palaces and forts are also great places to explore on your trip here. Image Credits Himanshu Sarpotdar
Maharashtra contains a rich cultural heritage and historical importance. It is also one of the prime states in India and a hub to various cultural and modern arts. The hospitable people and the immense number of places to visit it is essentially a tourist capital of India.

10 Best Places in Bihar on Your Itinerary

$
0
0

10 Best Places in Bihar on Your Itinerary

Bihar has many tags attached to it. The state owns the pride of establishing one among the first democracies in the world called Lichhavi. The earliest university in the world was established in Bihar. The name Bihar is a derivative from Vihara, which means ‘monastery’. True to its name and its rich cultural heritage, the state houses various monasteries and it is famous for monuments belonging to various religions. The major empires of India rose to great heights here and they succumbed here as well. River Ganga enriches the plains of the landlocked state and contributes to the fertility of lands along with rivers Kosi and Gandak. A wonderful place with a rich history offers many tourist attractions out of which, the top 10 places to visit in Bihar are mentioned below.

1. Nalanda University

nalanda-university
Nalanda University was established during the 5th century A.D. The university is considered the first residential university ever in the world. The university stands proof for the prominent role played by India in imparting knowledge. The university had 2000 teachers who taught over 10000 students from all parts of the world. The uniqueness of the place could be gauged by the fact that Buddha himself was a teacher here and Hieun-Tsang, Chinese traveler and a great scholar, was a student of this university. Red rocks were used in the construction, which is built in Kushana style of architecture. The remains excavated from the university ruins include stupas, ornamented panels, lecture halls and stairway. Image credits snowsomething

2. Bodhi Tree

bodhi-tree
Bodhi Tree is located about 100 km from Patna. Buddha achieved enlightenment under this tree and hence it is a pilgrim center for Buddhists who hail from all parts of the world. The place where it is situated has been declared a World Heritage Site by UNESCO.  On your visit to Bodhi Tree, you will find Maha Bodhi Temple, which is sacred to those who follow Buddhism. The architecture of the temple goes to show the richness and grace of Indian architecture. Image credits manbartlett

3. Muchalinda Lake

muchalinda-lake
Muchalinda Lake acquires the name after Shesh Naga or the Snake King Muchalinda who protected Buddha during a storm while he was into the sixth week of meditation. Muchalinda protected Buddha from the rising waves and in honor of his services; the place was named after him. You could find the sculpture depicting the hood protecting Buddha who is in the state of meditation on snake coil. The green trees by the lake and the lush greenery make it the most frequented tourist spot in Bodh Gaya. Image credits Barefoot Buddhist

4. Griddhakuta Peak

griddhakuta-peak
Griddhakuta Peak is famously known as the vulture peak. Located in Rajgir, the peak resembles the shape of vulture and it is frequented by vultures in great numbers. Buddha delivered some of his famous sermons here and hence it is considered sacred for Buddhists. The steps formed by cutting rocks lead you to two caves that are naturally formed. For those who find the trip physically challenging, chairlift facilities are available to reach the hilltop. Image credits lena milosevic

5. Rajgir Hot Springs

hot-springs-rajgir
Hot springs in Rajgir are famous tourist spots. Located at the foot of Vaibhava Hills, the springs get their water from Saptadhara, which passes behind Saptaparni Caves. The hot springs are considered to possess medicinal properties. Among the hot springs, Brahmakund spring is the hottest and has a temperature of 450 Celsius. It is believed that Lord Buddha and Mahavira had bathed in these hot springs. Image credits carol mitchel

6. Buxar Fort

The ancient fort situated in Buxar along the Ganges River was constructed in 1054 AD. The carvings found in the fort offer amazing views and the construction of the fort is outstanding. While you are here, do not miss some of the tourist attractions nearby, which include Gauri Shankar Temple and Nath Baba Temple.

7. Navlakha Palace

navlakha-palace
Situated in the town of Rajnagar near Madhubani in Bihar, the palace was built in the 17th century A.D. by Maharaja Rameshwar Singh of Darbhangha. It suffered extensive damage caused by an earthquake in 1934, and sadly wasn’t rebuilt after. Situated near the kamala river is a marble temple of the goddess kali, and it’s still widely visited, another temple of the goddess Durga forms an integral part of the palace, and is still in operation, also known as the Rajnagar palace complex, it’s one of the major tourist attractions in Mithila and people come to visit all year round. Image credits spri1985

8. Hieun Tsang Memorial Hall

hieun-tsang-memorial-hall
Built in memory of the famous Chinese scholar and traveler Hieun Tsang, the construction is rich in architecture. Hieun Tsang spent more than 12 years in this place on his visit to India. This was the place where Hieun Tsang learnt yoga under the guidance of Acharya Shil Bhadra. The famous traveler has thrown light on medieval India and Nalanda, which are found in the memorial hall. Image credits paandu

9. Jalmandir Temple

jalmandir-temple
Jalmandir Temple is situated in the middle of a lake, which is full of lotuses. King Nandivardhan, who was the elder brother of Lord Mahavira is said to have constructed the temple. The temple is in the shape of a Vimana. The place where Lord Mahavira attained Samadhi and the place he was cremated are marked in the temple. The 600 ft long bridge made of stone connects the temple to the banks of the pond. Image credits Focuztours

10. Patna Museum

Patna-museum
Patna Museum was constructed in 1917. The building is a blend of Rajput and Mughal architecture. The museum houses archaeological objects, paintings, sculptures and images by artists belonging to Hinduism and Buddhism. The museum also has a 200 million old fossil of a tree. At 12 noon every day, you can view picture source associated to culture. You will find the museum to provide information on the culture and tradition of the place. The museum remains closed on Mondays. Image credits Twocircles
There are many more tourist places in Bihar but you will find most of them related to its culture. Your tour to Bihar will provide you an insight of its rich cultural heritage and glorious past.

10 Attractive Places In Assam That Will Keep You Spellbound

$
0
0

10 Attractive Places In Assam That Will Keep You Spellbound

If you are looking for variety while choosing your holiday destination, Assam could be the perfect spot. Be it the natural scenery or culture of the people of Assam, you are sure to be awed by the variety and color Assam has to offer. People belonging to various cultures and races live here. The land has people following various faiths. Assam is home for various crafts as well. Though the picturesque state has so much to offer, ensure that you do not miss the top 10 places to visit in Assam.

1. Kaziranga National Park

kaziranga-national-park

Kaziranga National Park has been declared a World Heritage Site. The park is spread over 430 sq. kms and you will find various wild species such as tiger, elephant, rhinoceros, Indian bison, sambar, deer and many more. If you love birds, you need to be here during winter as migratory birds are seen in great numbers. You could go round the park in a jeep or car. If you fancy elephant ride, you are most welcome. The nearest cities from Kaziranga National Park are Jorhat and Tezpur. Image credits Deva

2. Agnigarh Hill

agnigarh-hill
Agnigarh hill is situated in Tezpur in Assam. As per Hindu mythology, a fortress was built here by King Banasura with a view to isolate his daughter Usha. The legend further goes to say that the place derived the name owing to the fire that surrounded the fortress always to avoid movement in and out of the place. The word Agni means fire. Image credits PXT1

3. Kamakhya Temple

kamakhya-temple
Kamakhya Temple is located on Nilachal Hill, Guwahati top at an altitude of 800 feet above sea level. River Brahmaputra flows on the northern side of the hill. The temple is over 2200 years old. Apart from its rich cultural heritage, Kamakhya is beauty personified. It offers a stunning view of rivers and hills. Whatever faith one follows in life, being at this location would make one experience divinity. Image credits rob of rochdale

4. Dibru Saikhowa National Park

Dibru-Saikhowa-National-Park
Dibru Saikhowa National Park is situated in Tinsukia in Assam. It owns the credit of being one among the major biodiversity hotspots of the world and one among the largest parks in Assam. The park is a blend of deciduous forests, semi-evergreen forests and swamp surface making it bio-diverse. You will find many rare wildlife species here and feral horses are one of the most famous species seen here. Image credits Rubul Deka

5. Orang National Park

orang national park
The park is situated on the northern banks of the river Brahmaputra. It is the only National Park in the country, which was created naturally. The tribes who lived there had abandoned 78.81-sq.km area. Some of the animals found here include royal Bengal tiger, one horned rhinoceros, leopard, elephant and many more. The place offers great delight to bird watchers as one could find various local birds and migratory birds here. Image credits Sandrine

6. Haflong Lake

haflong-lake
Haflong Lake is situated at the centre of Haflong hill town, which is famously called the‘Switzerland of the East’. The picturesque landscape with blue hills, large and beautiful lakes, enthralling streams, waterfalls and abundance of pineapple trees and orange trees earns the title for Haflong town. Haflong Lake is one among the two lakes of the town. It is situated at an altitude of 1683 feet above MSL and no wonder you will find clouds and mists touching your arms as they gently move away. The beauty not only enthralls you but also offers various water sports and hence both your body and mind are rejuvenated. Image credits shil55

7. Digboi

digboi
Asia’s first oil refinery, which is the second in world, is in Digboi. The oil town not only has refinery, which is over 100 years old but also has number of tea gardens. The place with misty blue hills offers various attractions including Digboi Oil Refinery, Ridge Point and Digboi Centenary Museum. From Ridge Point, you could have a stunning view of snow-clad mountains of eastern Himalayas. Digboi Centenary Museum gives you an insight into the history of the town. Image credits Dipsekhar Photography

8. Diphu

diphu
Diphu is situated in Karbi Anglong district in Assam. The town has various tourist attractions. If you love nature, you would love Arboretum, which is located near Diphu. The 13-hectare lush greenery offers spectacular views, which soothes your mind. Botanical Garden, which is a 5 km distance from Diphu, houses a variety of species of trees and plants. Boating facilities are available here. If you are keen to learn about the cultural past of the town, you need to visit District Museum. The museum was founded in 1886 and it displays artifacts that have archaeological importance and represent the culture of the land. You could find hunting tools used by the tribes here. Image credits Assam tourist spots

9. Umrangshu

umrangshu
Like most of the towns in Assam, Umrangshu is a picturesque beauty with beautiful hills and lush greenery. You would love your journey if you go trekking from Haflong Hill to Umrangshu. If you are planning a perfect holiday in a serene atmosphere that elevates your spirits, you cannot choose a better place than Umrangshu. Nature has blessed certain places on earth abundantly, but Umrangshu gains prominence as it remains untouched by the modern world in the name of so-called civilization. Garampani, the hot spring here attracts many tourists for its medicinal value. Kapili Hydel Power Plant is situated near the border and it is a famous tourist spot being the first of its kind here. Image credits Assam tourist spots

10. Cruise on River Brahmaputra

cruising-river-brahmaputra
Your trip to Assam will not be complete if you do not cruise river Brahmaputra. Dividing the city into 2 halves, the majestic flow of the river offers stunning views and great entertainment. Brahmaputra is the longest river in the country and cruising on the river that flows through the rich beauty of Assam is a unique experience. A cruise on Brahmaputra offers tea garden visits, wildlife viewing and exploring villages and towns. You could have a great time experiencing the essence of Assam on your cruise. Image credits 

10 Stunning Places In The Gifted Land Of Kerala

$
0
0

10 Stunning Places In The Gifted Land Of Kerala

If you are looking for a place that is beauty personified, if you are after a place that offers serene atmosphere and spectacular views and if you are aiming for some rejuvenation for your body and soul through natural treatment, you cannot think of a place other than Kerala. Kerala, the land, which enjoys the partiality of Mother Nature, has a lot to offer to tourists. Awe-inspiring beaches, majestic hill tops and picturesque landscape spellbound you on your visit to Kerala. It is very difficult to shortlist the tourist places in Kerala to narrow it down to 10 top places. However, an attempt is made here and you could include as many in your itinerary. The only suggestion while you visit Kerala is to take a long leave so that you could maximize your stay in the place.

1. Munnar

munnar-hill-station
Get ready to be lost in the chanceless beauty of the place where three rivers meet, namely Kundalay, Mudrapuzha and Nallathanni. Situated at 1524-metre altitude on the Western Ghats, Munnar Hill Station makes you wonder if it is the birthplace of beauty. The lush green landscape, waterfalls, lakes, forests and tea plantations make this place a heaven on earth. The place offers spectacular view of misty valleys and lakes. You might never have believed that watching tea plantations continuously might be so absorbing and interesting. You can have your share of adventure here as you can go paragliding, trekking and rock climbing. Image credits alinajohn101

2. Kerala Backwaters

Your trip to Kerala cannot have any meaning if you miss a cruise on the Kerala backwaters. The backwaters of Kerala form a network with interconnected canals, lakes, rivers and inlets. Various cities and towns are the starting points and destinations of Kerala backwater cruises. Cruising on Kerala houseboats in the backwaters is one of the most favored attractions here. Dining, sleeping and toilet facilities are available in houseboats. You remain close to nature while on cruise as you have your needs attended to in the houseboat itself. In the serene atmosphere, you could see aquatic creatures in action and observe birds as the boat gets by. You get to watch people working in the fields. Boat cruise lets you enjoy the ride on water while still connecting you with the activities on land.

3. Kumarakom

kumarakom
Kumarakom is located near Kottayam. It is one of the famous attractions of Kerala. It is bird watchers’ paradise owing to the 14-acre bird sanctuary, a favorite ground for migratory birds. Kumarakom is also a spectacular backwater destination and hence you can go on a boating ride here. As Ayurvedic massage is done here, the place is a favorite for everyone who seeks to relax body and mind. The Vembanad Lake in Kumarakom is a favorite tourist spot. It is the largest lake in Kerala and the longest lake in India. It is a great place to spend a relaxed day watching sunrise or sunset depending on the time of cruise. Image credits kence goergey

4. Chembra Peak

chembra-peak
Chembra Peak, near Meppadi town, is located at an altitude of 6900 feet above MSL. Trekking here could be very adventurous as the path is steep. The view from top of the peak is spectacular. Forests on either side of the peak, you will find the view amazing. The whole Wayanad falls within your vision range from here and you also get to view Kozhikkode, Nilgiris and Malappuram. Image credits sooraj

5. Thekkady

thekkady
Thekkady offers a great chance to view wildlife while on a cruise. You can find various wild life species here including elephants, tigers, deer, bisons and many more. Elephant rides are available here to take you inside the forest. Plantations and hill stations offer a picturesque setting to the place. You can go on a trek here. Some of the most important tourist attractions in Thekkady are Periyar River, Murikkady and Chellarkovil. Image credits kishku

6. Varkala Beach

varkala-beach
One of the most important features about Kerala is the Ayurvedic massage given at Varkala Beach. Varkala is famous for Ayurvedic massage and the place itself is in a wonderful setting. The beach and the mountain make the place attractive. You would not want to miss the sight of sunset here. The beach is clean and offers a great relaxation. You could stretch and let your eyes feast on the tranquil atmosphere or go for swimming and enjoy a great physical exercise. One of the most important aspects about the beach is that it is less crowded and hence you can have your space without being disturbed. Let the beauty of the beach and the atmosphere sinks in as you spend a quite evening here. Image credits anulal’s photos

7. Kovalam

OLYMPUS DIGITAL CAMERA
Kovalam is yet another stunning location in Kerala. Situated 16 kms away from the city of Trivandrum, Kovalam has three enchanting beaches. The largest of all the three beaches is the Lighthouse Beach. Hawah Beach is the second largest one here and the third beach is Samudra. Kovalam is one of the most sought after destinations in Kerala. Image credits nandunair

8. Chottanikkara Bhagavathy Temple

Chottanikkara-Bhagavathy-Temple
This is the most famous temple in the state of Kerala. It is situated on outskirts of Kochi. The two main deities here are Rajarajeswari and Badrakali. People believe that these Goddesses are very powerful. It is located in a serene atmosphere. Whatever your belief might be, you could still visit the place, which is one of the most important tourist destinations and offers you tranquil moments. Image credits Manchitra

9. Kerala Kathakali Centre

Bhima killing General Kichaka at a Kathakali performance. The st
You need to visit this place if you want to taste the essence of the culture of the people of Kerala. The Kerala Kathakali Centre was founded in the year 1990 with a view to bring to the fore Kerala’s classical arts. To achieve this, it encourages fresh talents and makes the training rigorous and more disciplined. The centre offers various performances such as Kathakali, Classical music and dance, Kalaripayattu, the famous martial art form and so on. Take some time to visit the place and watch the performance. You are sure to be blown away by their performances. The costume and makeup need special mention. Image credits fredricjournoud

10. Poovar Island

poovar-island
A ‘not to be missed’ destination. Poovar Island offers you the best in terms of visionary delights. This is the most sought after estuary in the state as it connects with lake, river and the sea. Take a boat cruise to enjoy the beauty of nature abound in the place. The golden sands and the stunning backwaters create a perfect setting for sunset. It seems that nature has played magic in this place. There are floating cottages as well as land cottages here. The place is also famous for Ayurvedic massages. Image credits nazan27
Suggesting just a few places to visit in Kerala is a Himalayan task. Thrissur, Kollam and Allepey are also among the major tourist destinations in Kerala. Kerala has limitless beauty to offer and is often nicknamed as “God’s own Country”. It is a perfect place to spend a vacation as Kerala elevates your spirits. You can experience oneness with nature and since Kerala is famous for massages, you can have a great time massaging your body to revive yourself.

Report on the Deadly Texas Fertilizer Explosion -- It was Preventable

$
0
0

Report on the Deadly Texas Fertilizer Explosion -- It was Preventable

re  
lack of quality control contributes to blastIn the news: Blame has been assigned in the West, Texas fertilizer plant explosion that occurred one year ago in April 2013 where 14 lives were lost and 236 were wounded. Who was at fault, according to the U.S. Chemical Safety Board (CSB)? Everyone. I said this a year ago while everyone was pointing fingers at each other in the article Quality Management: Risk Management and a Texas Fertilizer Plant.The CSB chairman of the board Rafael Noure-Eraso has now come out and said, "(The fire and explosion) resulted from the failure of a company to take the necessary steps to avert a preventable fire and explosion and from the inability of federal, state and local regulatory agencies to identify a serious hazard and correct it."
The federal agency interviewed West Fertilizer Co. employees and victims of the explosion and conducted studies of how the blast occurred. A fire at the plant led to conditions that caused the detonation of up to 34 tons of ammonium nitrate, a common fertilizer component and industrial explosive. The ammonium nitrate, which the company supplied to farmers to use as fertilizer in the region, was stored in wooden bins within a wooden building that did not have a sprinkler system.
Texas isn’t the only state with businesses at risk
Many U.S. fertilizer warehouses store ammonium nitrate in wooden bins, the board said.
lack of quality control leads to explosionDaniel Horowitz, the board's managing director added what some other experts have also said: The plant's storage of ammonium nitrate was potentially dangerous and West's firefighters and residents didn't realize how dangerous a fire there could be. For that reason the city zoned the area for homes, a school and a nursing home within what became the blast area.
While key questions remain unanswered, including the exact cause of the fire, "we know more than enough to keep this from happening again," Horowitz said. The investigation narrowed the possible causes of the plant fire to three things — a golf cart battery, an electrical system or a criminal act — but didn't go further.
EPA and OSHA share in the guilt
Besides the West Fertilizer Company both the U.S. Environmental Protection Agency and the U.S. Occupational Safety and Health Administration have regulatory oversight of fertilizer warehouses.
The CSB said OSHA needs to clarify standards governing the operation of ammonium nitrate storage facilities.
Moure-Eraso said he believes EPA has the authority to require the use of inherently safer technology in their operation.
A criticism was leveled against the CSB in error last year in the wake of the explosion. The Chemical Safety Board investigates explosions and fires at U.S. chemical plants. It has no regulatory or law enforcement authority, but makes recommendations to government and industry.
Any federal or state safety legislation enacted this past year
Have the state or U.S. government enacted more stringent regulations in this past year? No. Despite investigations that have yielded new information about safety deficiencies at the plant in West and voluntary safety steps taken by the fertilizer industry, there hasn't been a single state or federal law passed since the explosion requiring change.
Horowitz said several developments since the explosion have helped. The U.S. Environmental Protection Agency has issued guidelines for the storage of ammonium nitrate and the national industry group for fertilizer producers has created an organization that will offer voluntary inspections of U.S. dealerships.
"What we don't have at this point is any change whatsoever to federal or state mandatory codes," Horowitz said. "Without that, it's still permissible for a company to store ammonium nitrate in wooden bins. It's still permissible for ammonium nitrate to be stored near a school or a hospital."
Texas Two-Step two steps behind
Texas Fire Marshal Chris Connealy is traveling to small towns with ammonium nitrate storage facilities to discuss its safe handling and disaster preparation, and his office created a Web page where users can type in their zip codes to see if they live near a storage facility. It doesn't provide the names of facilities and has been little used thus far.
Connealy has said 46 facilities in Texas should be required to install sprinkler systems or retrofit buildings with non-combustible materials. He is working with state lawmakers on a potential bill to be considered by the Legislature when it reconvenes in January.
quality management system could have saved this from happeningWhat’s it worth?
For now the question is who will be held accountable for the next fertilizer plant explosion? Given the quality management risk assessment section of ISO 9001, doesn’t it make better sense to become certified voluntarily rather than risk losing your business and the lives of others because of a risk like this? Had the business put money into voluntarily improving their containers and added water sprinklers, they would have lowered the risk considerably. In order to become ISO 9001 certified they would have been instructed to do just that.
I have spoken before about the difference between risk prevention and the cost of putting out continuous fires. West, Texas has learned this the hard way. It is better to learn from West than learn on your own. If you would like some assistance bringing your business up to code, please look at a sample of our quality management software.











Viewing all 8140 articles
Browse latest View live