EOT CRANE WEEKLY INSPECTION CHECKLIST
Description | YES | NO | REMARKS | |
EOT crane Number | ||||
Shop & Bay | ||||
Date of checking | ||||
Cleaned on | ||||
Drive platform Unwanted material kept | ||||
L.T Motor Oil spillage in motor | ||||
Oil spillage in gear box | ||||
Idle platform 1) Railing cable track | ||||
2) Unwanted materials kept | ||||
3) C.T. Rails Bolt/Nuts are welding at joints | ||||
Hand rail C.T. Bolt / Nuts condition | ||||
Trolley 1) Platform clean hand rails clean fitted properly. | ||||
2) Leakage of oil from gear box of a) Hoisting | ||||
b) Cross travel | ||||
Long travel rails 1) Loose bolts/ Nuts rail joints Gap & alignments – Up/Down - Side | ||||
2) Grease on the track any obstruction | ||||
3) Sound during movement of cranes span deviation | ||||
Limit switch working | ||||
Motors covers in tight condition | ||||
Horn working | ||||
Pendent emergency switch working | ||||
Chain sling in good conditions | ||||
Capacity of load lifted within SWL | ||||
Identification of crane no with SWL marked | ||||
Only crane operator operated the crane | ||||
Guide rope used for material handling | ||||