Quantcast
Channel: EHSQL(Environment-Energy ,Health,Safety, Security and Social Ac. ,Quality-Lab) Technical services
Viewing all articles
Browse latest Browse all 8075

How Does a Hybrid Electric Vehicle Work?

Next: Natural Gas Vehicles Photo of a large truck stopped at a gas station that reads 'Natural Gas for Vehicles.' Natural gas vehicles (NGVs) are either fueled exclusively with compressed natural gas or liquefied natural gas (dedicated NGVs) or are capable of natural gas and gasoline fueling (bi-fuel NGVs). Dedicated NGVs are designed to run only on natural gas. Bi-fuel NGVs have two separate fueling systems that enable the vehicle to use either natural gas or a conventional fuel (gasoline or diesel). In general, dedicated natural gas vehicles demonstrate better performance and have lower emissions than bi-fuel vehicles because their engines are optimized to run on natural gas. In addition, the vehicle does not have to carry two types of fuel, thereby increasing cargo capacity and reducing weight. Compared with vehicles fueled with conventional diesel and gasoline, NGVs can produce significantly lower amounts of harmful emissions. In addition, some natural gas vehicle owners report service lives two to three years longer than gasoline or diesel vehicles and extended time between required maintenance. The driving range of natural gas vehicles generally is less than that of comparable gasoline- and diesel-fueled vehicles because of the lower energy content of natural gas. Extra storage tanks can increase range, but the additional weight may displace payload capacity. NGV horsepower, acceleration, and cruise speed are comparable with those of an equivalent conventionally fueled vehicle. How Does a Natural Gas Vehicle Work? Light-duty natural gas vehicles work much like gasoline-powered vehicles with spark-ignited engines. Some heavy-duty vehicles use spark-ignited natural gas systems, but other systems exist as well. High-pressure direct injection engines burn natural gas in a compression-ignition (diesel) cycle. Heavy-duty engines can also burn diesel and natural gas in a dual-fuel system.
$
0
0
Hybrid electric vehicles are powered by two energy sources—an energy conversion unit (such as an internal combustion engine or fuel cell) and an energy storage device (such as batteries or ultracapacitors). The energy conversion unit can be powered by gasoline, diesel, compressed natural gas, hydrogen, or other fuels.
Hybrid electric vehicles have the potential to be two to three times more fuel-efficient than conventional vehicles. 

Hybrid Electric Vehicles

Animation of a vehicle with a battery, electric motor, and internal combustion engine inside and an icon depicting conventional or alternative fuel outside.

Fuel-Efficient Vehicle

Most hybrid electric vehicles have an internal combustion engine and electric motor. These vehicles are powered by an alternative fuel or a conventional fuel, such as gasoline, and a battery, which is charged by regenerative braking.
Hybrid electric vehicles (HEVs) are powered by an internal combustion engine or other propulsion source that can be run on conventional or alternative fuel and an electric motor that uses energy stored in a battery. HEVs combine the benefits of high fuel economy and low emissions with the power and range of conventional vehicles.
A wide variety of hybrid electric vehicles is currently available. Although HEVs are often more expensive than similar conventional vehicles, some cost may be recovered through fuel savings.

Help from an Electric Motor

Hybrid electric vehicles are powered by an internal combustion engine and an electric motor, which uses energy stored in batteries. The extra power provided by the electric motor allows for a smaller engine. Additionally, the battery can power auxiliary loads like sound systems and headlights and reduce engine idling when stopped. Together, these features result in better fuel economy without sacrificing performance.

Regenerative Braking

A hybrid electric vehicle cannot plug into off-board sources of electricity to charge the battery. Instead, the vehicle uses regenerative braking and the internal combustion engine to charge. The vehicle captures energy normally lost during braking by using the electric motor as a generator and storing the captured energy in the battery. The energy from the battery provides extra power during acceleration.

Fuel-Efficient System Design

HEVs can be either mild or full hybrids, and full hybrids can be designed in series or parallel configurations.
  • Mild hybrids—also called micro hybrids—use a battery and electric motor to help power the vehicle and can allow the engine to shut off when the vehicle stops (such as at traffic lights or in stop-and-go traffic), further improving fuel economy. Mild hybrid systems cannot power the vehicle using electricity alone. These vehicles generally cost less than full hybrids but provide less substantial fuel economy benefits than full hybrids.
  • Full hybrids have more powerful electric motors and larger batteries, which can drive the vehicle on just electric power for short distances and at low speeds. These systems cost more than mild hybrids but provide better fuel economy benefits.
There are different ways to combine the power from the electric motor and the engine. Parallel hybrids—the most common HEV design—connect the engine and the electric motor to the wheels through mechanical coupling. Both the electric motor and the internal combustion engine drive the wheels directly.

Viewing all articles
Browse latest Browse all 8075

Trending Articles