Water purifier has become a serious need as it is literally very difficult to survive in such a polluted environment of today. One can get gallons and gallons of pure water whenever required if they have a water purifier at home. This is a better option rather than buying canned waters outside since both time and money are saved. Maintaining the Reverse Osmosis system in the right condition is a must. Filters in the Reverse Osmosis system play an integral part and each consumer should know how and when it must be cleaned.

 

The cleaning period differs from one person to another person. It solely depends on the usage and the condition of the water but it is mandatory to clean in every 3 to 12 months. Each model comes out with different filter stages. Routine maintenance is required for the system to work efficiently. When the taste of water coming out of the system, changes and the filters and membranes are worn out, then there is a need to clean up the Reverse Osmosis system.

According to Do It Yourself, it is better to use soft water for the cleaning process and also for the dilution of the cleaning chemicals used in the system. A cleaning tank, a Reverse Osmosis cleaning pump, tank cooler, a tank mixer and a Reverse Osmosis cleaning cartridge filter which helps in removal of dirt produced during the cleaning process are also other necessary tools required for cleaning up the Reverse Osmosis system.

Before starting the cleaning up process firstly cut the water supply to the storage tank. Next, empty the storage tank completely. Allow the system free for some time and now remove the filter housings. After removing the filter housings, now remove the Reverse Osmosis membrane and filters and then replace the filter housings. Then, dilute the chemicals prescribed by the manufacturer for cleaning the Reverse Osmosis system. For instance, bleach which is most commonly used during the cleaning up processes. Pour and run the solution throughout the system for about an hour. After running the solution, run soft water to clean the chemicals present in the system. There are certain chemical residues present in the system and these should be washed out thoroughly. The filter housings are to be cleaned with soap solution and rinsed thoroughly with soapy water.

The condition of the O-rings is to be checked necessarily to ensure whether they need a replacement. If the rings are completely damaged then they must be replaced. Some O-rings are found to be dried up and they can be treated with water-based lubrication and can be used again. As said earlier, filters play an important role in the Reverse Osmosis system. Filters are the hearts of the RO water purifier system. It is only the condition of the filters that states whether the Reverse Osmosis system needs a cleaning or not.

The pre-filter which is used to remove dirt, dust, and other sediments and the carbon filter which is designed to remove Chlorine and other contaminants which ruin the taste of water can be checked whether they require a replacement. It is better to replace them during this cleaning up process. Now, both the filters are mounted back to their places. Then, open the valve to allow the flow of water in the system. Fill the storage tank completely and empty it for one last time. Now the RO system is cleaned and ready for use.