Quantcast
Channel: EHSQL(Environment-Energy ,Health,Safety, Security and Social Ac. ,Quality-Lab) Technical services
Viewing all articles
Browse latest Browse all 8107

To lay down the procedure for preparation of Reagent solutions.

$
0
0



Standard operating procedure to prepare the reagent solutions for chemical analysis in quality control laboratory.
1.0 OBJECTIVE:
      To lay down the procedure for preparation of Reagent solutions.
2.0 SCOPE:
      This SOP shall be applicable to Quality Control Dept.
3.0 RESPONSIBILITY:
      Quality Control supervisor
4.0 ACCOUNTABILITY:
      Sr. Manager Quality Assurance
5.0 PROCEDURE:
5.1 The solution shall be prepared by the chemist who actually does the analysis. The solution shall be prepared when it is required.
5.2 The quantity of the reagent depends on the requirement of the test.
5.3 The procedure shall be followed for preparing solution, which are laid down in the Appendix of respective Pharmacopoeias.
5.4 Distilled water shall be used for preparation of reagent.
5.5 Storage condition for reagent shall be followed as specified, and light resistant bottles, refrigerator etc. shall be used wherever required.
5.6 All the reagent solution shall be stored stating name of solution, strength, normality, molarity (if there), prepared by name, sign, date of preparation and to be used before.
5.7 Once the solution is prepared it can be used for 3 months after date of preparation.
5.8 If any thing found incorrect within 3 months it shall be replaced by the fresh solution and prepared as and when required.
6.0 ABBREVIATION:
6.1 SOP : Standard Operating Procedure

Viewing all articles
Browse latest Browse all 8107

Trending Articles