Sugar and the Environment - Encouraging Better Management Practices in Sugar Production and Processing

Shri K V K Raju - An Eternal Source of Inspiration

Nagarjuna Group is a dream willed into reality by its visionary Founder Shri KVK Raju. Shri KVK Raju a first generation technopreneur was born in a humble agricultural family in Andhra Pradesh on November 28, 1928. On graduating from Banaras Hindu University and the Madras Institute of Technology he went on to complete his Master's in Mechanical and Industrial Engineering from Michigan State University and the University of Minnesota, USA. After a short stint in the American Industry he returned to India and worked for short periods at Caltex Oil Refinery, Orient General Industries and Associated Electrical Industries. Finally, he joined Union Carbide of India and stayed there for 15 years. While working with Union Carbide, KVK's deep-rooted urge to serve society through industry impelled him to start a venture of his own. Thus was born Nagarjuna Group in 1973 with an investment of US$ 23 million. The Group has since then come a long way to become a diversified conglomerate with an asset base of US$ 2.5 billion.
A recipient of various awards for his outstanding contribution to the industry and society, KVK, was a firm believer in the adage "practice what you preach". A self-made man KVK practised simple living and high thinking. He dreamt big and worked with an unstinted focus of mind and body to make those dreams come true. KVK was a visionary with firm belief in his mission to serve society through industry. It is this belief, which continues to be the guiding light of Nagarjuna Group.

Welcome to ikisan.com, your agricultural information hub.

To explore Crop Specific Information pertaining to your region select respective Country and Statefrom the given drop down list and proceed.

Introduction Among various riputes of sugarcane production, although fertilizers contribute maximum to the increase in yield but these cannot help to maintain and enhance soil organic matter content which is ultimate key to sustainability. Organic matter maintains porous soil structure, provides superior water holding capacity and allows oxygen to penetrate for use by soil microbes that break down manure, crop residues and other organic matter. Infact, earlier to the introduction of chemical fertilizers in cane cultivation the fertility of fields used to be sustained not only by animal and plant wastes, but also by certain practices of mixed cropping, crop rotation etc. These practices have in fact been followed for centuries in India but have been rapidly given up in recent years due to input-intensive agriculture. There is no doubt that sugarcane crop needs fertilizers. A crop of 125 tonnes per hectare removes 83 kg nitrogen, 37.2kg phosphorus and 168 kg potassuim per hectare from soil. The tendency to supply all these nutrients through chemical fertilizers, however, has to be avoided as these have deleterius effect on soil productivity on long-term basis. However, to sustains sugarcane production under intensive cultivation as practiced in the hot climate of India, organic matter content of soil must be maintained either by recycling organic wastes, use of farm yard manure, green manuring, growing legumes in crop sequences and as companion crops. Role of Major Nutrients Nitrogen Influences sugrcane yield and quality. Required for vegetative growth (tillering, foliage formation, stalk fromation and growth) and root growth. Vegetative growth in sugarcane is directly related to yield. Deficiency of Nitrozen leads to: paleness of foliage. early leaf senescence thinner and shorter stalk longer but thinner roots Excess Nitrozen leads to: harmful to crop prolongs vegetative growth delays maturity and ripening increases reducing sugar content in juice lowering juice quality increases soluble N in juice affecting clarification susceptible to lodging, pest and disease incidence Phoshhorus Uptake depends on presence of soluble and plant absorbable form. P- requirement is relatively less than N and K. Necessary for formation of proteins and thus for yield build up. Important for cell division leads to crop growth Stimulates root growth Necessary for plant metabolism and photo synthesis Required for adequate tillering Interacts with N and thus enhance ripening. Deficiency of P leads to: reduced tillering delays in canopy development, excess weed growth affects stalk elongation. less production of secondary and tertiary stalks leaves grow closely leaf colour appears green violet for proper clarifiction while processing 300-400 ppm of phosphorus in cane juice is necessary. Excess P is wasted due to fixation in soil Potassium Requirement of K is greater than N and P. Required for carbon assimilation, photo synthesis translocation of carbohydrates Involved in various enzymatic activities important for sugar synthesis and translocation to the storage organs. develops resistance to sugarcane against pest, disease and lodging. Maintains cell turgidity under moisture stress conditions. Balances the effect of N and P Excess availability of K leads to "Luxury consumption". NPK requirements NPK requirements depends on variety, soil type, irrigation level etc. The requirements of nutrients not only met by the application of manures and fertilizers but also fertility status. Dosage Dosage of nutrient to be supplied will be determined based on crop requirement contribution from the soil and organic manures applied, likely losses of applied nutrients by means of leaching, volatililization, fixation etc. Time for Fertilizer Application Timing is based on crop need at different growth phases, and best use of applied nutrient with less wastage. Nitrogen requirement is maximum at tillering and early grand growth phase viz., within the first six months. upto tillering the nitrogen need is much limited and hence application at planting may not be required in most cases. If at all N needed from the beginning by the crop 10% of the total dose can be applied at planting by placing near the sett. Between 3-4 months age (tillering phase) high amount of N uptake is observed and hence, the first application of nitrogen should be at the start of tillering viz., at 45 days of planting. In case of short duration, early maturing varieties first application of N can be given at 30 days age of the crop. Beginning of the grand growth period viz the end of tillering phase the N-requirement is very high and this can be met by applying N between 90-120 days period for Eksali crop. Potassium application normally done along with N application because of better utilisation of N in the presence of K. Therefore K is applied at 45th and 90th day. In sugarcane late application of K at around 6 months has been found to improve sugar recovery particularly under drought situations. Late application or N beyond 120 days (Eksalicrop) will have adverse effect on juice quality because of continued vegetative growth, late tillering, reduce 5% of Juice, increased soluble nitrogen in juice, water shoot formation etc. Farmers should realise that late application of N will do more harm than good. Most of the late applied N goes to late tillers and water shoot formation besides becoming susceptible to pests and diseases. The time of N application however, can be extended to six months in case of adsali crop. Small quantities of N along with P and K can be applied late for recovery of crops suffered due to flood and water logging. This should be done only when there is sufficient time between harvest and the time of application. Fertilizer application should invariably followed by irrigation and excess irrigation should be avoided to avoid leaching losses. Method of application Apply phosphorus in the furrow bottom and mix slightly with soil before planting. Nitrogen and potassium fertilizers are given in split doses, applied in bands on either side of the cane row. Cover the fertilizer with soil immediately after placement to reduce volatilization losses. This is also achieved by partial earthing after first top dressing and full earthing up after second top dressing. Micro Nutrients Iron chlorosis particularly line induced chlorisis in calcarious soil leads to interveinal chlorisis, stunted growth. This could be corrected by repeated spray application of ferrous sulphate at 0.5% - 10% concentration. Application of cured press mud or FYM reduces chlorisis. Chlorosis may also occur due to nematodes. Zinc deficiency is another important micronutrient problem in soils where paddy is grown in rotation. To overcome zinc deficiency 0.5% ZnSo4 , spray can be done. Zinc spray can also be done along with ferrous sulphate spray. Ferrous sulphate and zinc sulphate together can be applied to soil at 25kg each per hectare. Foliar nutrition Foliar nutrition of urea (1 to 2.5%) and potassium (2.5%) under moisture stress is a useful practice to improve yield and quality. Foliar application of DAP formed to be useful to improve yield and quality. Good foliage wetting is necessary. 'Teepol' can be used as a wetting agent. Sprayings done preferably in the morning hours. A boom sprayer may be used in a grown up crop. Tissue analysis guide to deficient and non-deficient sugarcane during active growing period CropNutrient CropPlant part numhbered from top down CropCritical concentration CropRange showing deficiency symptom Range without deficiency symptom Nitrogen Blades 3,4,5,6 1.0% 1-1-5% 1.5-2. 7% Phosphorus Sheaths 3,4,5,6 Intermodes 8-10 0.08% 0.04% 0.02-.05% 0.10-.32% 0.05-0.2% 0.04-0.2% Potassium Sheaths 3,4,5,6 Internodes 8-10 2.25% 1.00% 0.3-1.5% 0.3-0.8% 2.25-6% 1-2% Calcium Sheaths 3,4,5,6 Internodes 8-10 0.15% 0.06% 0.02-0.1% 0.05% 0.1-2% 0.05-2% Magnesium Sheaths 3,4,5,6 Internodes 8-10 0.1% 0.05% <0.1% <0.05% 0.15-1.0% 0.10-1% Sulphur Blades 3,4,5,6 20-100 ppm 300-10,000ppm Zinc Sheaths 3,4,5,6 10 ppm <10ppm 10-100ppm Iron Blades 3,4,5,6 @ 1-10pm 20-600ppm Boron Blades 3,4,5,6 1ppm <1 ppm 2-30 ppm Copper Blades 3,4,5,6 5 ppm <3.5 ppm 5-100 ppm Manganese Blades 3,4,5,6 @ 1-10 ppm 20-400ppm Molybdenum Blades 3,4,5,6 0.05 ppm <0.05ppm 0.05-4 ppm @Varies with Fe/Mn ratio, Critical level can be below 10ppm if Fe/Mn remain>1 (Source : Schmehl and Humbert, 1964)